Leonardo Lo Presti

NCImilano: an electron-density-based code for the study of noncovalent interactions

NCImilano, a Fortran90 code for applying the reduced density gradient (RDG) descriptor to a real-space study of noncovalent interactions, is presented. This code has been specifically designed for the X-ray charge density community, as it can deal with both gas-phase and solid-state electron densities as evaluated by popular multipolar (XD2006) and Gaussian-based quantum mechanical (Gaussian03/09, CRYSTAL) computational platforms. Moreover, it implements for the first time the possibility of plotting energy densities over RDG isosurfaces.

Charge ordering transition in GdBaCo2O5: Evidence of reentrant behavior

We present a detailed study on the charge ordering transition in a GdBaCo2O5.0 system by combining highresolution synchrotron powder/single-crystal diffraction with electron paramagnetic resonance experiments as a function of temperature. We found a second-order structural phase transition at T-CO=247 K (Pmmm to Pmma) associated with the onset of long-range charge ordering. At T-min approximate to 1.2T(CO), the electron paramagnetic resonance linewidth rapidly broadens, providing evidence of antiferromagnetic spin fluctuations. This likely indicates that, analogously to manganites, the long-range antiferromagnetic order in GdBaCo2O5.0 sets in at approximate to T-CO. Pair distribution function analysis of diffraction data revealed signatures of structural inhomogeneities at low temperature. By comparing the average and local bond valences, we found that above T-CO the local structure is consistent with a fully random occupation of Co2+ and Co3+ in a 1:1 ratio and with a complete charge ordering below T-CO. Below T approximate to 100 K the charge localization is partially melted at the local scale, suggesting a reentrant behavior of charge ordering. This result is supported by the weakening of superstructure reflections and the temperature evolution of electron paramagnetic resonance linewidth that is consistent with paramagnetic reentrant behavior reported in the GdBaCo2O5.5 parent compound.

Synthesis and biological evaluation of CTP synthetase inhibitors as potential agents for the treatment of African trypanosomiasis.

Acivicin analogues with an increased affinity for CTP synthetase (CTPS) were designed as potential new trypanocidal agents. The inhibitory activity against CTPS can be improved by increasing molecular complexity, by inserting groups able to establish additional interactions with the binding pocket of the enzyme. This strategy has been pursued with the synthesis of α‐amino‐substituted analogues of Acivicin and N1‐substituted pyrazoline derivatives. In general, there is direct correlation between the enzymatic activity and the in vitro anti‐trypanosomal efficacy of the derivatives studied here. However, this cannot be taken as a general rule, as other important factors may play a role, notably the ability of uptake/diffusion of the molecules into the trypanosomes.

Development of Rhodesain Inhibitors with a 3‐Bromoisoxazoline Warhead

Novel rhodesain inhibitors were obtained by combining an enantiomerically pure 3‐bromoisoxazoline warhead with a specific peptidomimetic recognition moiety. All derivatives behaved as inhibitors of rhodesain, with low micromolar Ki values. Their activity against the enzyme was found to be paralleled by an in vitro antitrypanosomal activity, with IC50 values in the mid‐micromolar range. Notably, a preference for parasitic over human proteases, specifically cathepsins B and L, was observed.

A Close Look at the Structure of the TiO2-APTES Interface in Hybrid Nanomaterials and Its Degradation Pathway: An Experimental and Theoretical Study

The surface functionalization of TiO2-based materials with alkylsilanes is attractive in several cutting-edge applications, such as photovoltaics, sensors, and nanocarriers for the controlled release of bioactive molecules. (3-Aminopropyl)triethoxysilane (APTES) is able to self-assemble to form monolayers on TiO2 surfaces, but its adsorption geometry and solar-induced photodegradation pathways are not well understood. We here employ advanced experimental (XPS, NEXAFS, AFM, HR-TEM, and FT-IR) and theoretical (plane-wave DFT) tools to investigate the preferential interaction mode of APTES on anatase TiO2. We demonstrate that monomeric APTES chemisorption should proceed through covalent Si–O–Ti bonds. Although dimerization of the silane through Si–O–Si bonds is possible, further polymerization on the surface is scarcely probable. Terminal amino groups are expected to be partially involved in strong charge-assisted hydrogen bonds with surface hydroxyl groups of TiO2, resulting in a reduced propensity to react with other species. Solar-induced mineralization proceeds through preferential cleavage of the alkyl groups, leading to the rapid loss of the terminal NH2 moieties, whereas the Si-bearing head of APTES undergoes slower oxidation and remains bound to the surface. The suitability of employing the silane as a linker with other chemical species is discussed in the context of controlled degradation of APTES monolayers for drug release and surface patterning.

Asymmetric modular synthesis of a semirigid dipeptide mimetic by cascade cycloaddition/ring rearrangement and borohydride reduction.

A new semirigid dipeptide mimetic was prepared on multigram scale, in good yield, and in a stereocontrolled way, starting from commercially available and unexpensive reagents, i.e., N-benzylpiperidone, tosyl azide, and proline methyl ester. The optimized multicomponent process consisted of a cascade click cycloaddition and a ring rearrangement reaction, followed by a reductive step. Theoretical calculations were performed to elucidate the reaction mechanism and support the stereochemical outcome of the reduction. Finally, the new scaffold was used for the preparation of model peptidomimetics, whose β turn conformation was confirmed by dynamic NMR experiments.

On the role of data quality in experimental charge-density studies

High-resolution X-ray diffraction data were collected at T = 19 K from two similar spherical crystals of the fungal metabolite citrinin, C(13)H(14)O(5). The two data sets were of markedly different quality, one data set (MQ, medium quality) comprising a single octant of the reciprocal lattice and including reflections with obviously peculiar intensity profiles while the second (HQ, high quality) comprised a hemisphere of reflections and showed no flawed profiles. Parallel multipolar refinements were carried out for both. While most of the resulting geometric parameters, including bond lengths and angles, were in close agreement (the standard uncertainties were approximately twice as large for the MQ data, reflecting the smaller number of observations), the agreement is noticeably worse for electronic properties such as electron densities and their Laplacians at the bond and ring critical points. These latter features are especially sensitive to the quality of the low-angle (and strong) intensities, which was not high for the MQ data. By contrast, the magnitudes of the molecular dipole moment from the two experiments are the same within 1 standard uncertainty, with an angle of about 13 degrees between the two vectors. It is concluded that only true high-quality data allow a fully significant and quantitative analysis of the details of the experimental electron density rho(exp), while high-resolution medium-quality data, measured at very low temperature and adequately processed, can still be used for a qualitative analysis, or for the derivation of overall electronic properties.

Isothiazoles. Part 13: Synthesis of sulfamic esters, [1,2]thiazete S, S-dioxides, benzo[e][1,2]thiazine S, S-dioxides or triazoles by reaction of isothiazole dioxides with sodium azide

Abstract The reaction of NaN3 with 5-substituted 3-diethylamino-4-(4-methoxyphenyl)-isothiazole 1,1-dioxides is presented affording [2-cyano-1-diethylamino-2-(4-methoxyphenyl)-ethylidene]-sulfamic acid derivatives, 3-diethylamino-1,1-dioxo-4-(4-methoxyphenyl)-1,2-dihydro-[1,2]thiazete-4-carbonitrile, 3-diethylamino-7-methoxy-1,1-dioxo-1,4-dihydro-benzo[e][1,2]thiazine-4-carbonitrile or triazole derivatives. The outcome of the reaction strongly depends on the C-5 substituent and the correct choice of the reaction conditions allows direction of the reaction towards the formation of the sulfamic esters or the [1,2]thiazete carbonitrile or the triazoles in satisfactory yield.

Model peptides containing the 3-sulfanyl-norbornene amino acid, a conformationally constrained cysteine analogue effective inducer of 310-helix secondary structures

The properties of the constrained tetrasubstituted 3-sulfanylnorbornene amino acid (NRB), when inserted in Ala-Aib model peptides, were extensively studied. The conformational behaviour of these models was evaluated by theoretical calculations, spectroscopic analyses and by X-ray crystallography. Taken together, our data confirm that both (R,R,R,S)- and (S,S,S,R)-NRB enantiomers possess a strong helicogenic effect when inserted in short Ala-Aib sequences, suggesting that the rigid norbornane core has a positive effect on the ability to stabilize helical secondary structures. This information will be essential for future applications in the rational design of conformationally stable peptides targeted on protein–protein interaction (PPI) surfaces.

Experimental and theoretical charge density distribution of the colossal magnetoresistive transition metal sulfide FeCr2S4

The total charge density distribution rho(r) of the colossal magnetoresistive transition metal sulfide FeCr(2)S(4) was evaluated through a multipole formalism from a set of structure factors obtained both experimentally, by means of single crystal high-quality x-ray diffraction data collected at T=23 K, and theoretically, with an extended-basis unrestricted Hartree-Fock periodic calculation on the experimental geometry. A full topological analysis, followed by the calculation of local energy density values and net atomic charges, was performed using the quantum theory of atoms in molecules. The experimental and theoretical results were compared. Good agreement was found for the topological properties of the system, as well as for the atomic net charges and the nature of the chemical bonds. An analysis of the electron density rho(r), its Laplacian nabla(2)[rho(r)], and the total energy density H(r) at the bond critical points was employed to classify all the interactions that resulted as predominantly closed shell (ionic) in nature. The topological indicators of the bonded interactions for Fe are distinct from those for Cr. The Fe-S bond distances were found to be 0.145 A shorter than the ideal values computed on the basis of Shannons crystal radii, much shorter than the Cr-S distances with respect to their ideal Shannon lengths. Concomitantly, rho(r) and |H(r)| at the bond critical points are greater for Fe-S interactions, indicating that the local concentration of charge density in the internuclear region is larger for the tetrahedrally coordinated iron than for the octahedrally coordinated chromium. The isosurface in the real space for nabla(2)[rho(r)]=0 was plotted for both iron and chromium, pointing out the local zones of valence shell charge concentration and relating them to the partial d-orbital occupancy of the two transition metal atoms.