Leyong Jiang

Tunable optical bistability of dielectric/nonlinear graphene/dielectric heterostructures

We have established the theoretical relation of nonlinear optical response with respect to the dielectric/nonlinear graphene/dielectric heterostructures and further demonstrated the tunable optical bistability at terahertz frequencies. It is shown that the hysteretic behavior is strongly dependent on the Fermi energy of graphene, and the threshold electric fields could be correspondingly adjusted with the continuous tuning of Fermi Energy level. It is clear that the bistable thresholds can be lowered dramatically by decreasing the Fermi energy of graphene, at the same time the optical hysteresis width is narrowed. Moreover, we have confirmed that the optical bistability can be tuned by adjusting the incident illumination angle, or by varying the thickness and permittivity of the dielectric slabs. Our contribution might provide a new avenue of fabricating graphene based optical switching device that could even operate at terahertz regime.

Tunable perfect absorption at infrared frequencies by a graphene-hBN hyper crystal

In this article, we have theoretically demonstrated that the perfect absorption at infrared frequencies can be achieved and controlled by using a graphene-hexagonal Boron Nitride (hBN) hyper crystal. hBN, the latest natural hyperbolic material, can be regarded as an excellent substrate to form a hyper crystal with graphene. Although the perfect absorption by a half-space of hBN crystal can be achieved due to its high optical anisotropy, but the perfect absorption can only appear at certain fixed wavenumber and incidence angle. By introducing a graphene-hBN hyper crystal, we can get perfect absorption at different wavenumbers and incidence angles by varying the Fermi energy level of graphene sheets via electrostatic biasing. We show that the perfect absorption can be realized at different Fermi energies for TM waves.

Sensitivity Improved SPR Biosensor Based on the MoS2/Graphene–Aluminum Hybrid Structure

MoS₂-graphene-based hybrid structures are biocompatible and useful in the field of biosensors. Herein, we propose a heterostructured MoS₂/aluminum (Al) film/MoS₂/graphene as a highly sensitive surface plasmon resonance (SPR) biosensor based on the Otto configuration. The sensitivity of the proposed biosensor is enhanced by using three methods. First, prisms of different refractive index have been discussed and it is found that sensitivity can be enhanced by using a low refractive index prism. Second, the influence of the thickness of the air layer on the sensitivity is analyzed and the optimal thickness of air is obtained. Finally, the sensitivity improvement and mechanism by using molybdenum disulfide (MoS₂)–graphene hybrid structure is revealed. The maximum sensitivity ∼ 190.83°/RIU is obtained with six layers of MoS₂ coating on both surfaces of Al thin film.

Low-threshold optical bistability with multilayer graphene-covering Otto configuration

In this paper, we propose a modified Otto configuration to realize tunable and low-threshold optical bistability at terahertz frequencies by attaching multilayer graphene sheets to a nonlinear substrate interface. Our work demonstrates that the threshold of optical bistability can be markedly reduced (three orders of magnitude) by covering the nonlinear substrate with multilayer graphene sheets, due to strong local field enhancement with the excitation of surface plasmons. We present the influences of the Fermi energy of graphene, the incident angle, the thickness of air gap and the relaxation time of graphene on the hysteresis phenomenon and give a way to optimize the surface plasmon resonance, which will enable us to further lower the minimal power requirements for realizing optical bistability due to the strong interaction of light with graphene sheets. These results are promising for realization of terahertz optical switches, optical modulators and logical devices.

Manipulating the optical bistability at terahertz frequency in the Fabry-Perot cavity with graphene

We investigate theoretically the optical bistability from a Fabry-Perot cavity with graphene in the terahertz (THz) frequency. It is demonstrated that the optical bistablility in this cavity can be realized due to the electric field enhancement and the giant third-order nonlinear conductivity of graphene. The optical bistable behavior is strongly dependent on the transmission amplitude of the mirror and the position of the graphene in the cavity. It is especially important that the hysterical behaviors of the transmitted light rely on the optical conductivity of graphene, making the Fabry-Perot cavity to be a good candidate for dynamic tunable optical bistable device in the THz frequencies, owing to the possibility of high tunability of graphene conductivity by means of external electrostatic or magnetostatic field.

Tunable THz Angular/Frequency Filters in the Modified Kretschmann–Raether Configuration With the Insertion of Single Layer Graphene

Tunable terahertz (THz) angular/frequency filters in the modified Kretschmann-Raether configuration with the insertion of single-layer graphene have been numerically demonstrated. Due to the excitation of the transverse magnetic (TM) polarized surface plasmons at the interface of two dielectrics with the insertion of the graphene sheet, the transmission resonance occurs at some range incident angles and frequencies in the THz frequency range, which can be adopted for designing the angular/frequency filters. It is shown that the resonant angle and the resonant wavelength can be tuned by varying the Fermi energy of the graphene sheets via electrostatic biasing. Moreover, we show that the resonant behaviors can be engineered by changing the gap thickness or the incident angle.

Tunable Fano resonances of a graphene/waveguide hybrid structure at mid-infrared wavelength

A planar graphene/dielectric multilayer structure is investigated, where the graphene surface plasmon polariton and the planar waveguide mode are coupled to realize Fano resonances. Few-layer graphene with high doping levels is used to excite surface plasmons at mid-infrared wavelength. Reflectance of the structure is calculated numerically by transfer-matrix method, and tunable Fano resonances with different line shapes are demonstrated by varying doping levels of graphene. Properties of the Fano resonances are discussed qualitatively by calculating electric field distribution in the structure and quantitatively by utilizing an analytical fitting equation. We also calculate Goos-Hänchen shift of the Fano resonances as an example for potential applications, and find that large Goos-Hänchen shift appears for optimized doping levels of graphene.

Critical coupling using the hexagonal boron nitride crystals in the mid-infrared range

We theoretically demonstrate the perfect absorption phenomena in the hexagonal boron nitride (hBN) crystals in the mid-infrared wavelength ranges by means of critical coupling with a one-dimensional photonic crystal spaced by the air. Different from the polymer absorbing layer composed by a metal-dielectric composite film, the hyperbolic dispersion characteristics of hBN can meet the condition of critical coupling and achieve the total absorption in the mid-infrared wavelength ranges. However, the critical coupling phenomenon can only appear in the hBN crystals with the type II dispersion. Moreover, we discuss the influence of the thickness of hBN, the incident angle, and the thickness and permittivity of the space dielectric on the total absorption. Ultimately, the conditions for absorption enhancement and the optimization methods of perfect absorption are proposed, and the design rules for a totally absorbing system under the different conditions are achieved.

Long-Range Surface Plasmon With Graphene for Enhancing the Sensitivity and Detection Accuracy of Biosensor

A novel long-range surface plasmon with graphene is proposed to enhance the sensitivity and detection accuracy (DA) of the biosensor. Compared with the conventional long-range surface plasmon resonance (LRSPR) structure with Au, the coating of the metal surface with graphene is employed to increase the biomolecules adsorption, prevent oxidation, and enhance the sensitivity and DA. Furthermore, we demonstrated that the sensitivity has a nearly tenfold improvement with a huge increasing DA in the proposed LRSPR biosensor compared with the SPR biosensor. Finally, we discuss the influence of the refractive index of sensing medium on the LRSPR biosensor and find that the sensitivity is changing with the refractive index of the sensing medium and that an optimal sensitivity can be obtained at a suitable refractive index. We believe that this scheme could find potential applications in chemical examination, medical diagnosis, and biological detection.

Low threshold optical bistability in one-dimensional gratings based on graphene plasmonics

Optical bistability of graphene surface plasmon is investigated numerically, using grating coupling method at normal light incidence. The linear surface plasmon resonance is strongly dependent on Femi-level of graphene, hence it can be tuned in a large wavelength range. Due to the field enhancement of graphene surface plasmon resonance and large third-order nonlinear response of graphene, a low-threshold optical hysteresis has been observed. The threshold value with 20MW/cm2 and response time with 1.7ps have been verified. Especially, it is found that this optical bistability phenomenon is angular insensitivity for near 15° incident angle. The threshold of optical bistability can be further lowered to 0.5MW/cm2 by using graphene nanoribbons, and the response time is also shorten to 800fs. We believe that our results will find potential applications in bistable devices and all-optical switching from mid-IR to THz range.