Lien-Guo Dai

Spheroid formation of mesenchymal stem cells on chitosan and chitosan-hyaluronan membranes

Stem cells can lose their primitive properties during in vitro culture. The culture substrate may affect the behavior of stem cells as a result of cell-substrate interaction. The maintenance of self-renewal for adult human mesenchymal stem cells (MSCs) by a biomaterial substrate, however, has not been reported in literature. In this study, MSCs isolated from human adipose (hADAS) and placenta (hPDMC) were cultured on chitosan membranes and those further modified by hyaluronan (chitosan-HA). It was observed that the MSCs of either origin formed three-dimensional spheroids that kept attached on the membranes. Spheroid formation was associated with the increased MMP-2 expression. Cells on chitosan-HA formed spheroids more quickly and the size of spheroids were larger than on chitosan alone. The expression of stemness marker genes (Oct4, Sox2, and Nanog) for MSCs on the materials was analyzed by the real-time RT-PCR. It was found that formation of spheroids on chitosan and chitosan-HA membranes helped to maintain the expression of stemness marker genes of MSCs compared to culturing cells on polystyrene dish. The maintenance of stemness marker gene expression was especially remarkable in hPDMC spheroids (vs. hADAS spheroids). Blocking CD44 by antibodies prevented the spheroid formation and decreased the stemness gene expression moderately; while treatment by Y-27632 compound inhibited the spheroid formation and significantly decreased the stemness gene expression. Upon chondrogenic induction, the MSC spheroids showed higher levels of Sox9, aggrecan, and collagen type II gene expression and were stained positive for glycosaminoglycan and collagen type II. hPDMC had better chondrogenic differentiation potential than hADAS upon induction. Our study suggested that the formation of adhered spheroids on chitosan and chitosan-HA membranes may sustain the expression of stemness marker genes of MSCs and increase their chondrogenic differentiation capacity. The Rho/Rho-associated kinase (ROCK) signaling pathway may be involved in spheroid formation.

Water-based polyurethane 3D printed scaffolds with controlled release function for customized cartilage tissue engineering

Conventional 3D printing may not readily incorporate bioactive ingredients for controlled release because the process often involves the use of heat, organic solvent, or crosslinkers that reduce the bioactivity of the ingredients. Water-based 3D printing materials with controlled bioactivity for customized cartilage tissue engineering is developed in this study. The printing ink contains the water dispersion of synthetic biodegradable polyurethane (PU) elastic nanoparticles, hyaluronan, and bioactive ingredients TGFβ3 or a small molecule drug Y27632 to replace TGFβ3. Compliant scaffolds are printed from the ink at low temperature. These scaffolds promote the self-aggregation of mesenchymal stem cells (MSCs) and, with timely release of the bioactive ingredients, induce the chondrogenic differentiation of MSCs and produce matrix for cartilage repair. Moreover, the growth factor-free controlled release design may prevent cartilage hypertrophy. Rabbit knee implantation supports the potential of the novel 3D printing scaffolds in cartilage regeneration. We consider that the 3D printing composite scaffolds with controlled release bioactivity may have potential in customized tissue engineering.

Sciatic Nerve Regeneration by Microporous Nerve Conduits Seeded With Glial Cell Line-Derived Neurotrophic Factor or Brain-Derived Neurotrophic Factor Gene Transfected Neural Stem Cells

Neurotrophic factors such as the glial cell line-derived neurotrophic factor (GDNF) and brain-derived neurotrophic factor (BDNF) promote nerve cell survival and regeneration, but their efficacy in repairing a longer gap defect of rat sciatic nerve (15 mm) has not been established. In this study, two recombinant mammalian vectors containing either rat GDNF gene or BDNF gene were constructed and each was transfected into neural stem cells (NSCs). It was found that the transfection of GDNF or BDNF gene into NSCs led to significantly enhanced expression of GDNF or BDNF mRNA. The amount of GDNF or BDNF protein secreted from the transfected NSCs showed a 3.3-fold or 2.5-fold increase than that from nontransfected NSCs, respectively. The regeneration capacity of rat sciatic nerve in a poly(D,L-lactide) conduit seeded with GDNF or BDNF-transfected NSCs was evaluated by the histology, functional gait, and electrophysiology after 8 weeks of implantation. It was observed that the degree of myelination and the size of regenerated tissue in the conduits seeded with GDNF- and BDNF-transfected NSCs were higher than those seeded with the nontransfected NSCs. Conduits seeded with GDNF-transfected NSCs had the greatest number of blood vessels. The functional recovery assessed by the functional gait and electrophysiology was significantly improved for conduits seeded with GDNF or BDNF-transfected NSCs. It was concluded that the genetically modified NSCs may have potential applications in promoting nerve regeneration and functional recovery.

Sciatic Nerve Regeneration by Cocultured Schwann Cells and Stem Cells on Microporous Nerve Conduits

Cell transplantation is a useful therapy for treating peripheral nerve injuries. The clinical use of Schwann cells (SCs), however, is limited because of their limited availability. An emerging solution to promote nerve regeneration is to apply injured nerves with stem cells derived from various tissues. In this study, different types of allogeneic cells including SCs, adipose-derived adult stem cells (ASCs), dental pulp stem cells (DPSCs), and the combination of SCs with ASCs or DPSCs were seeded on nerve conduits to test their efficacy in repairing a 15-mm-long critical gap defect of rat sciatic nerve. The regeneration capacity and functional recovery were evaluated by the histological staining, electrophysiology, walking track, and functional gait analysis after 8 weeks of implantation. An in vitro study was also performed to verify if the combination of cells led to syner-gistic neurotrophic effects (NGF, BDNF, and GDNF). Experimental rats receiving conduits seeded with a combination of SCs and ASCs had the greatest functional recovery, as evaluated by the walking track, functional gait, nerve conduction velocity (NCV), and histological analysis. Conduits seeded with cells were always superior to the blank conduits without cells. Regarding NCV and the number of blood vessels, conduits seeded with SCs and DPSCs exhibited better values than those seeded with DPSCs only. Results from the in vitro study confirmed the synergistic NGF production from the coculture of SCs and ASCs. It was concluded that coculture of SCs with ASCs or DPSCs in a conduit promoted peripheral nerve regeneration over a critical gap defect.

Restoration of skin pigmentation after deep partial or full-thickness burn injury.

Significant skin pigmentation changes occur when patients suffer deep burn injuries. These pigmentation disorders may cause not only cosmetic and psychological issues, but more importantly it increases the risk of skin cancer or photoaging. Severe burns significantly effect on the process of repigmentation as the pigmentation is tightly regulated by cell proliferation and differentiation of melanocytes and melanocyte stem cells which are housing in the epidermis and hair follicles of the skin. In the present review, we discuss the possible mechanisms to replenish the melanocytes from the healthy epidermis and hair follicles surrounding burn wounds. The molecular mechanisms of skin repigmentation following healing of burn injuries includes the differentiation of melanoblasts into melanocytes, the distribution and responses of melanocytes and melanocyte stem cells after burn injury, and the regulation of melanin production. We also reviewed advanced therapeutic strategies to treat pigmentation disorders, such as convectional surgery, laser, UV treatment and emerging concepts in skin tissue-engineering.

A Biodegradable Hemostatic Gelatin/Polycaprolactone Composite for Surgical Hemostasis.

Abstract Massive bleeding is the leading cause of battlefield-related deaths and the second leading cause of deaths in civilian trauma centers. One of the challenges of managing severe wounds is the need to promote hemostasis as quickly as possible, which can be achieved by using hemostatic dressings. In this study, we fabricated 2 kinds of gelatin/polycaprolactone composites with 2 ratios of gelatin/polycaprolactone, 1:1 and 2:1 (GP11 and GP21, respectively). Scanning electron microscopy revealed that the GP11 composite exhibited rougher and more porous structure than the GP21 composite did. Furthermore, both composites showed similar biocompatibility as that of tissue culture polystyrene. Moreover, both GP composites tended to show a gradual decrease in contact angle to zero within 40 minutes. The in vitro blood plasma coagulation assay revealed that the prothrombin time was significantly longer for the GP composites than it was for the Quikclot composite, whereas the activated partial thromboplastin time of the GP11 composite was significantly shorter than that of the gauze. Furthermore, the GP11 had the largest platelet adsorption of all the composites. The in vivo coagulation test showed an obvious shortening of the bleeding time with the Quikclot and GP21 compared with gauze sample. In conclusion, the GP composites showed superior biocompatibility and hemostasis to the gauze and comparable effects with the Qickclot composite. Therefore, the GP composites have the potential for development as biodegradable surgical hemostatic agents.

High correlation between skin color based on CIELAB color space, epidermal melanocyte ratio, and melanocyte melanin content

Background To treat skin color disorders, such as vitiligo or burns, melanocytes are transplanted for tissue regeneration. However, melanocyte distribution in the human body varies with age and location, making it difficult to select the optimal donor skin to achieve a desired color match. Determining the correlations with the desired skin color measurement based on CIELAB color, epidermal melanocyte numbers, and melanin content of individual melanocytes is critical for clinical application. Method Fifteen foreskin samples from Asian young adults were analyzed for skin color, melanocyte ratio (melanocyte proportion in the epidermis), and melanin concentration. Furthermore, an equation was developed based on CIELAB color with melanocyte ratio, melanin concentration, and the product of melanocyte ratio and melanin concentration. The equation was validated by seeding different ratios of keratinocytes and melanocytes in tissue-engineered skin substitutes, and the degree of fitness in expected skin color was confirmed. Results Linear regression analysis revealed a significant strong negative correlation (r = − 0.847, R2 = 0.717) between CIELAB L* value and the product of the epidermal melanocyte ratio and cell-based melanin concentration. Furthermore, the results showed that an optimal skin color match was achieved by the formula. Discussion We found that L* value was correlated with the value obtained from multiplying the epidermal melanocyte ratio (R) and melanin content (M) and that this correlation was more significant than either L* vs M or L* vs R. This suggests that more accurate prediction of skin color can be achieved by considering both R and M. Therefore, precise skin color match in treating vitiligo or burn patients would be potentially achievable based on extensive collection of skin data from people of Asian descent.

Evaluation and characterization of waterborne biodegradable polyurethane films for the prevention of tendon postoperative adhesion

Background Tendon adhesion is a serious problem and it affects tendon gliding and joint motion. Although recent studies have yielded promising results in developing anti-adhesion materials, there are still many problems. Polycaprolactone (PCL)-based polyurethane (PU) has good mechanical properties and biocompatibility, and it has a potential in anti-adhesion applications. Materials and methods In this study, a series of waterborne biodegradable polyurethane (WBPU) films with different ratios of ionic groups were synthesized. In order to select an effective anti-adhesion film, the WBPU films were cast and characterized for physicochemical properties and biocompatibility. Results All WBPU films were non-cytotoxic in the cell viability test and had suitable physicochemical and mechanical properties based on the measurement of zeta potential, water contact angle, mechanical properties, water absorption, thickness change, and gelatin test. To evaluate the anti-adhesion effect, severely injured tendons of rabbits were sutured with the modified Kessler core suture technique and WBPU films were then wrapped around the tendon. Implantation in rabbits showed that the WBPU film had better anti-adhesion effect than PCL films and the untreated control, and demonstrated no significant difference in the anti-adhesion performance from the commercial product Seprafilm based on gross evaluation, histological analysis, and biomechanical assessment. Conclusion Compared to Seprafilm and PCL applied in the tendon anti-adhesion, WBPU had better mechanical properties, low inflammatory reaction, and a proper degradation interval.