Lingtao Sun

The Use of an Edible Mushroom-Derived Renewable Carbon Material as a Highly Stable Electrocatalyst towards Four-Electron Oxygen Reduction

The development of highly stable and efficient electrocatalysts for sluggish oxygen reduction reaction (ORR) is exceedingly significant for the commercialization of fuel cells but remains a challenge. We here synthesize a new nitrogen-doped biocarbon composite material (N-BC@CNP-900) as a nitrogen-containing carbon-based electrocatalyst for the ORR via facile all-solid-state multi-step pyrolysis of bioprotein-enriched enoki mushroom as a starting material, and inexpensive carbon nanoparticles as the inserting matrix and conducting agent at controlled temperatures. Results show that the N-BC@CNP-900 catalyst exhibits the best ORR electrocatalytic activity with an onset potential of 0.94 V (versus reversible hydrogen electrode, RHE) and high stability. Meanwhile, this catalyst significantly exhibits good selectivity of the four-electron reaction pathway in an alkaline electrolyte. It is notable that pyridinic- and graphtic-nitrogen groups that play a key role in the enhancement of the ORR activity may be the catalytically active structures for the ORR. We further propose that the pyridinic-nitrogen species can mainly stabilize the ORR activity and the graphitic-nitrogen species can largely enhance the ORR activity. Besides, the addition of carbon support also plays an important role in the pyrolysis process, promoting the ORR electrocatalytic activity.

The Oxygen Reduction Electrocatalytic Activity of Cobalt and Nitrogen Co-doped Carbon Nanocatalyst Synthesized by a Flat Template

The design of noble-metal-free catalysts for oxygen reduction reaction (ORR) is very important to the commercialization of fuel cells. Here, we use a Co-modified montmorillonite (Co-MMT) as a flat template to prepare Co- and N-doped nanocarbon ORR catalysts derived from carbonization of polyaniline at controlled temperatures. The use of flat template can hinder the agglomeration of polyaniline during pyrolysis process and optimize the N-rich active site density on the surface. The addition of transition metal Co in the flat MMT template can largely promote the formation of Co–N sites in prepared catalyst, facilitating the effective improvement of catalytic activity towards the ORR with a direct four-electron transfer pathway. The excellent ORR activity may be mainly attributed to high contents of graphitic N, pyridinic-N, and Co-N configurations. This study opens a new way to rationally design cheap and active ORR catalysts by using simple flat compound as a direct template.

Surface Modification of Multi-Walled Carbon Nanotubes via Hemoglobin-Derived Iron and Nitrogen-Rich Carbon Nanolayers for the Electrocatalysis of Oxygen Reduction

The great challenge of boosting the oxygen reduction reaction (ORR) activity of non-noble-metal electrocatalysts is how to achieve effective exposure and full utilization of nitrogen-rich active sites. To realize the goals of high utilization of active sites and fast electron transport, here we report a new strategy for synthesis of an iron and nitrogen co-doped carbon nanolayers-wrapped multi-walled carbon nanotubes as ORR electrocatalyst (N-C@CNT-Fe) via using partially carbonized hemoglobin as a single-source precursor. The onset and half-wave potentials for ORR of N-C@CNT-Fe are only 45 and 54 mV lower than those on a commercial Pt/C (20 wt.% Pt) catalyst, respectively. Besides, this catalyst prepared in this work has been confirmed to follow a four-electron reaction mechanism in ORR process, and also displays ultra-high electrochemical cycling stability in both acidic and alkaline electrolytes. The enhancement of ORR activity can be not only attributed to full exposure and utilization of active site structures, but also can be resulted from the improvement of electrical conductivity owing to the introduction of CNT support. The analysis of X-ray photoelectric spectroscopy shows that both Fe–N and graphitic-N species may be the ORR active site structures of the prepared catalyst. Our study can provide a valuable idea for effective improvement of the electrocatalytic activity of non-noble-metal ORR catalysts.

Boosting the oxygen reduction activity of a three-dimensional network Co–N–C electrocatalyst via space-confined control of nitrogen-doping efficiency and the molecular-level coordination effect

The improvement of total nitrogen content and nitrogen-doping efficiency in carbon-based electrocatalysts is greatly significant to boost the electrocatalytic activity for the oxygen reduction reaction (ORR). Here, we report a new strategy for the synthesis of a highly mesoporous cobalt and nitrogen co-doped carbon electrocatalyst (3D-Co–N–C) with a three-dimensional network structure and a high BET surface area (∼638 m2 g−1) via using a novel cobalt-2,4,6-tri(2-pyridyl)-1,3,5-triazine complex with a strong molecular-level coordination effect as a single-source precursor and self-assembled sodium chloride aggregates as a space-confined nanoreactor for effective control of a high-temperature calcination process to reduce the thermal loss of nitrogen atoms and promote the nitrogen-doping efficiency, facilitating boosting of the ORR electrocatalytic activity in alkaline medium. The prepared 3D-Co–N–C catalyst exhibits unexpectedly excellent ORR activity with an onset potential of ∼1.0 V and a half-wave potential of ∼0.83 V, which is comparable to that of the commercial 20 wt% Pt/C catalyst. Additionally, the H2O2 yield (<17.0%) and the average electron transfer number of ∼3.8 for 3D-Co–N–C indicate a quasi four-electron pathway for ORR catalysis, suggesting that 3D-Co–N–C is a promising carbon-based electrocatalyst. It is proposed that the formation of the Co–Nx active structure can effectively enhance the electrocatalytic activity, but high contents of pyridinic- and graphitic-N can be mainly responsible for the ORR activity, which may be the electrocatalytically active site centers for the ORR. Besides, high BET surface area, highly mesoporous characteristics and outstanding electronic conductivity are also significant for the improvement of ORR activity. This study can provide a new, facile and green method for building high-performance carbon-based ORR electrocatalysts derived from easily available and innoxious transition metal–organic complexes, which can also help us to better understand the origin of the activity, active sites and their catalysis mechanism.

Heavily Graphitic-Nitrogen Self-doped High-porosity Carbon for the Electrocatalysis of Oxygen Reduction Reaction

Large-scale production of active and stable porous carbon catalysts for oxygen reduction reaction (ORR) from protein-rich biomass became a hot topic in fuel cell technology. Here, we report a facile strategy for synthesis of nitrogen-doped porous nanocarbons by means of a simple two-step pyrolysis process combined with the activation of zinc chloride and acid-treatment process, in which kidney bean via low-temperature carbonization was preferentially adopted as the only carbon-nitrogen sources. The results show that this carbon material exhibits excellent ORR electrocatalytic activity, and higher durability and methanol-tolerant property compared to the state-of-the-art Pt/C catalyst for the ORR, which can be mainly attributed to high graphitic-nitrogen content, high specific surface area, and porous characteristics. Our results can encourage the synthesis of high-performance carbon-based ORR electrocatalysts derived from widely-existed natural biomass.