nze Li

Electrochemical dynamics of nanoscale metallic inclusions in dielectrics.

Nanoscale metal inclusions in or on solid-state dielectrics are an integral part of modern electrocatalysis, optoelectronics, capacitors, metamaterials and memory devices. The properties of these composite systems strongly depend on the size, dispersion of the inclusions and their chemical stability, and are usually considered constant. Here we demonstrate that nanoscale inclusions (for example, clusters) in dielectrics dynamically change their shape, size and position upon applied electric field. Through systematic in situ transmission electron microscopy studies, we show that fundamental electrochemical processes can lead to universally observed nucleation and growth of metal clusters, even for inert metals like platinum. The clusters exhibit diverse dynamic behaviours governed by kinetic factors including ion mobility and redox rates, leading to different filament growth modes and structures in memristive devices. These findings reveal the microscopic origin behind resistive switching, and also provide general guidance for the design of novel devices involving electronics and ionics.

Ferroelastic domain switching dynamics under electrical and mechanical excitations.

In thin film ferroelectric devices, switching of ferroelastic domains can significantly enhance electromechanical response. Previous studies have shown disagreement regarding the mobility or immobility of ferroelastic domain walls, indicating that switching behaviour strongly depends on specific microstructures in ferroelectric systems. Here we study the switching dynamics of individual ferroelastic domains in thin Pb(Zr0.2,Ti0.8)O3 films under electrical and mechanical excitations by using in situ transmission electron microscopy and phase-field modelling. We find that ferroelastic domains can be effectively and permanently stabilized by dislocations at the substrate interface while similar domains at free surfaces without pinning dislocations can be removed by either electric or stress fields. For both electrical and mechanical switching, ferroelastic switching is found to occur most readily at the highly active needle points in ferroelastic domains. Our results provide new insights into the understanding of polarization switching dynamics as well as the engineering of ferroelectric devices.

Atomic Scale Structure Changes Induced by Charged Domain Walls in Ferroelectric Materials

Charged domain walls (CDWs) are of significant scientific and technological importance as they have been shown to play a critical role in controlling the switching mechanism and electric, photoelectric, and piezoelectric properties of ferroelectric materials. The atomic scale structure and properties of CDWs, which are critical for understanding the emergent properties, have, however, been rarely explored. In this work, using a spherical-aberration-corrected transmission electron microscope with subangstrom resolution, we have found that the polarization bound charge of the CDW in rhombohedral-like BiFeO3 thin films not only induces the formation of a tetragonal-like crystal structure at the CDW but also stabilizes unexpected nanosized domains with new polarization states and unconventional domain walls. These findings provide new insights on the effects of bound charge on ferroelectric domain structures and are critical for understanding the electrical switching in ferroelectric thin films as well as in memory devices.

Giant Resistive Switching via Control of Ferroelectric Charged Domain Walls

Controlled switching of resistivity in ferroelectric thin films is demonstrated by writing and erasing stable, nanoscale, strongly charged domain walls using an in situ transmission electron microscopy technique. The resistance can be read nondestructively and presents the largest off/on ratio (≈10(5) ) ever reported in room-temperature ferroelectric devices, opening new avenues for engineering ferroelectric thin-film devices.

Single-domain multiferroic BiFeO3 films.

The strong coupling between antiferromagnetism and ferroelectricity at room temperature found in BiFeO3 generates high expectations for the design and development of technological devices with novel functionalities. However, the multi-domain nature of the material tends to nullify the properties of interest and complicates the thorough understanding of the mechanisms that are responsible for those properties. Here we report the realization of a BiFeO3 material in thin film form with single-domain behaviour in both its magnetism and ferroelectricity: the entire film shows its antiferromagnetic axis aligned along the crystallographic b axis and its ferroelectric polarization along the c axis. With this we are able to reveal that the canted ferromagnetic moment due to the Dzyaloshinskii–Moriya interaction is parallel to the a axis. Furthermore, by fabricating a Co/BiFeO3 heterostructure, we demonstrate that the ferromagnetic moment of the Co film does couple directly to the canted moment of BiFeO3.

Intercorrelated in-plane and out-of-plane ferroelectricity in ultrathin two-dimensional layered semiconductor In2Se3

Enriching the functionality of ferroelectric materials with visible-light sensitivity and multiaxial switching capability would open up new opportunities for their applications in advanced information storage with diverse signal manipulation functions. We report experimental observations of robust intralayer ferroelectricity in two-dimensional (2D) van der Waals layered α-In2Se3 ultrathin flakes at room temperature. Distinct from other 2D and conventional ferroelectrics, In2Se3 exhibits intrinsically intercorrelated out-of-plane and in-plane polarization, where the reversal of the out-of-plane polarization by a vertical electric field also induces the rotation of the in-plane polarization. On the basis of the in-plane switchable diode effect and the narrow bandgap (∼1.3 eV) of ferroelectric In2Se3, a prototypical nonvolatile memory device, which can be manipulated both by electric field and visible light illumination, is demonstrated for advancing data storage technologies.

Giant Ferroelectric Polarization in Ultrathin Ferroelectrics via Boundary‐Condition Engineering

Tailoring and enhancing the functional properties of materials at reduced dimension is critical for continuous advancement of modern electronic devices. Here, the discovery of local surface induced giant spontaneous polarization in ultrathin BiFeO3 ferroelectric films is reported. Using aberration-corrected scanning transmission electron microscopy, it is found that the spontaneous polarization in a 2 nm-thick ultrathin BiFeO3 film is abnormally increased up to ≈90-100 µC cm-2 in the out-of-plane direction and a peculiar rumpled nanodomain structure with very large variation in c/a ratios, which is analogous to morphotropic phase boundaries (MPBs), is formed. By a combination of density functional theory and phase-field calculations, it is shown that it is the unique single atomic Bi2 O3-x layer at the surface that leads to the enhanced polarization and appearance of the MPB-like nanodomain structure. This finding clearly demonstrates a novel route to the enhanced functional properties in the material system with reduced dimension via engineering the surface boundary conditions.

Discovery of a magnetic conductive interface in PbZr0.2Ti0.8O3 /SrTiO3 heterostructures

Emergent physical properties often arise at interfaces of complex oxide heterostructures due to the interplay between various degrees of freedom, especially those with polar discontinuities. It is desirable to explore if these structures may generate pure and controllable spin currents, which are needed to attain unmatched performance and energy efficiency in the next-generation spintronic devices. Here we report the emergence of a spin-polarized two-dimensional electron gas (SP-2DEG) at the interface of two insulators, SrTiO3 and PbZr0.2Ti0.8O3. This SP-2DEG is strongly localized at the interfacial Ti atoms, due to the interplay between Coulomb interaction and band bending, and can be tuned by the ferroelectric polarization. Our findings open a door for engineering ferroelectric/insulator interfaces to create tunable ferroic orders for magnetoelectric device applications and provide opportunities for designing multiferroic materials in heterostructures.Two-dimensional electron gases that form in some complex oxide heterostructures may have useful functional behavior due to the interaction of the parent materials. Here the authors show that PZT/STO interfaces can host a spin-polarized electron gas, even though the bulk materials are nonmagnetic.

Size Effect on Spontaneous Flux-closure Domains in BiFeO 3 Thin Films

1. Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109 2. Department of Chemical Engineering and Materials Science, University of California Irvine, Irvine, CA 92697 3. Department of Materials Science and Engineering, Penn State University, University Park, PA 16802 4. Department of Materials Science and Engineering, Cornell University, Ithaca, NY 14853 5 Department of Physics and Astronomy, University of California Irvine, Irvine, California 92697.

Double-tilt in situ TEM holder with ultra-high stability

A double tilting holder with high stability is essential for acquiring atomic-scale information by transmission electron microscopy (TEM), but the availability of such holders for in situ TEM studies under various external stimuli is limited. Here, we report a unique design of seal-bearing components that provides ultra-high stability and multifunctionality (including double tilting) in an in situ TEM holder. The seal-bearing subsystem provides superior vibration damping and electrical insulation while maintaining excellent vacuum sealing and small form factor. A wide variety of in situ TEM applications including electrical measurement, STM mapping, photovoltaic studies, and CL spectroscopy can be performed on this platform with high spatial resolution imaging and electrical sensitivity at the pA scale.