Lisa N Miller

Five-year results of the ASR XL Acetabular System and the ASR Hip Resurfacing System: an analysis from the Australian Orthopaedic Association National Joint Replacement Registry.

BACKGROUND Articular Surface Replacement (ASR) hip prostheses, which have metal-on-metal bearing surfaces, were manufactured by DePuy Orthopaedics (Warsaw, Indiana) for use in both conventional total hip arthroplasty and hip resurfacing. Both the ASR XL Acetabular System and the ASR Hip Resurfacing System were recently recalled worldwide by the manufacturer. This report summarizes an analysis by the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) of the outcome of arthroplasties involving the ASR prostheses. METHODS The first recorded use of the ASR XL Acetabular System in Australia occurred in 2004, and the Registry recorded 4406 procedures involving this system through December 31, 2009. The first recorded use of the ASR Hip Resurfacing System in Australia occurred in 2003, and the Registry recorded 1167 procedures through December 31, 2009. The Kaplan-Meier method and proportional-hazard modeling were used to compare the revision rate of primary total hip arthroplasties involving the ASR XL Acetabular System with that of arthroplasties involving all other conventional prostheses as well as with that of arthroplasties involving all other conventional prostheses with a metal-on-metal-articulation. In addition, the revision rate of primary arthroplasties involving the ASR Hip Resurfacing System was compared with that of arthroplasties involving all other hip resurfacing prostheses. Patient demographics, prosthesis characteristics, and information regarding the type of revision and the reason for revision were also compared. RESULTS Arthroplasties involving both ASR designs had a significantly greater revision rate compared with those involving all other prostheses. The cumulative revision rate of arthroplasties involving the ASR XL Acetabular System at five years postoperatively was 9.3% (95% confidence interval [CI], 7.3% to 11.9%) compared with 3.4% (95% CI, 3.3% to 3.5%) for total hip arthroplasties involving all other conventional prostheses. The cumulative revision rate of arthroplasties involving the ASR Hip Resurfacing System at five years postoperatively was 10.9% (95% CI, 8.7% to 13.6%) compared with 4.0% (95% CI, 3.7% to 4.5%) for arthroplasties involving all other resurfacing prostheses. Arthroplasties involving the ASR XL Acetabular System had a greater rate of revision due to implant loosening and/or osteolysis and due to metal sensitivity compared with total hip arthroplasties involving all other conventional prostheses. Arthroplasties involving the ASR XL Acetabular System also had a significantly greater revision rate compared with total hip arthroplasties involving all other conventional metal-on-metal prostheses. Arthroplasties involving the ASR Hip Resurfacing System had a greater rate of revision due to metal sensitivity compared with total hip arthroplasties involving all other resurfacing prostheses. CONCLUSIONS ASR prostheses used in conventional hip arthroplasty and in hip resurfacing exhibited a greater revision rate compared with other prostheses in the AOANJRR. These results are consistent with those derived from other registries and from published studies of individual cohorts.

Outcome of primary resurfacing hip replacement: evaluation of risk factors for early revision: 12,093 replacements from the Australian Joint Registry

Background and purpose The outcome of modern resurfacing remains to be determined. The Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) started collection of data on hip resurfacing at a time when modern resurfacing was started in Australia. The rate of resurfacing has been higher in Australia than in many other countries. As a result, the AOANJRR has one of the largest series of resurfacing procedures. This study was undertaken to determine the results of this series and the risk factors associated with revision. Patients and methods Data from the AOANJRR were used to analyze the survivorship of 12,093 primary resurfacing hip replacements reported to the Joint Replacement Registry between September 1999 and December 2008. This was compared to the results of primary conventional total hip replacement reported during the same period. The Kaplan-Meier method and proportional hazards models were used to determine risk factors such as age, sex, femoral component size, primary diagnosis, and implant design. Results Female patients had a higher revision rate than males; however, after adjusting for head size, the revision rates were similar. Prostheses with head sizes of less than 50 mm had a higher revision rate than those with head sizes of 50 mm or more. At 8 years, the cumulative per cent revision of hip resurfacing was 5.3 (4.6–6.2), as compared to 4.0 (3.8–4.2) for total hip replacement. However, in osteoarthritis patients aged less than 55 years with head sizes of 50 mm or more, the 7-year cumulative per cent revision for hip resurfacing was 3.0 (2.2–4.2). Also, hips with dysplasia and some implant designs had an increased risk of revision. Interpretation Risk factors for revision of resurfacing were older patients, smaller femoral head size, patients with developmental dysplasia, and certain implant designs. These results highlight the importance of patient and prosthesis selection in optimizing the outcome of hip resurfacing.

Unicompartmental knee arthroplasty in patients aged less than 65: Combined data from the Australian and Swedish Knee Registries

Introduction and purpose In recent years, there has been renewed interest in using unicompartmental knee arthroplasty (UKA). Several studies have reported increasing numbers of UKAs for osteoarthritis in patients who are less than 65 years of age, with low revision rates. To describe and compare the use and outcome of UKA in this age group, we have combined data from the Australian and Swedish knee registries. Patients and methods More than 34,000 UKA procedures carried out between 1998 and 2007 were analyzed, and we focused on over 16,000 patients younger than 65 years to determine usage and to determine differences in the revision rate. Survival analysis was used to determine outcomes of revision related to age and sex, using any reason for revision as the endpoint. Results Both countries showed a decreasing use of UKA in recent years in terms of the proportion of knee replacements and absolute numbers undertaken per year. The 7-year cumulative risk of revision of UKA in patients younger than 65 years was similar in the two countries. Patients younger than 55 years had a statistically significantly higher cumulative risk of revision than patients aged 55 to 64 years (19% and 12%, respectively at 7 years). The risk of revision in patients less than 65 years of age was similar in both sexes. Interpretation The results of the combined UKA data from the Australian and Swedish registries show a uniformity of outcome between countries with patients aged less than 65 having a higher rate of revision than patients who were 65 or older. Surgeons and patients should be aware of the higher risk of revision in this age group.

Poor outcome of revised resurfacing hip arthroplasty: 397 cases from the Australian Joint Replacement Registry

Background and purpose Recent years have seen a rapid increase in the use of resurfacing hip arthroplasty despite the lack of literature on the long-term outcome. In particular, there is little evidence regarding the outcome of revisions of primary resurfacing. The purpose of this analysis was to examine the survivorship of primary resurfacing hip arthroplasties that have been revised. Patients and methods Over 12,000 primary resurfacing hip arthroplasties were recorded by the Australian Orthopaedic Association National Joint Replacement Registry between September 1, 1999 and December 31, 2008. During this time, 397 revisions for reasons other than infection were reported for these primary resurfacings and classified as acetabular, femoral, or both acetabular and femoral revisions. The survivorship of the different types of revisions was estimated using the Kaplan-Meier method and compared using proportional hazard models. Additionally, the outcome of a femoral-only revision was compared to that of primary conventional total hip arthroplasty. Results Acetabular-only revision had a high risk of re-revision compared to femoral-only and both acetabular and femoral revision (5-year cumulative per cent revision of 20%, 7%, and 5% respectively). Femoral-only revision had a risk of re-revision similar to that of revision of both the acetabular and femoral components. Femoral-only revision had over twice the risk of revision of primary conventional total hip arthroplasty. Interpretation Revision of a primary resurfacing arthroplasty is associated with a major risk of re-revision. The best outcome is achieved when either the femoral-only or both the acetabular and femoral components are revised. Technically straightforward femoral-only revisions generally have a worse outcome than a primary conventional total hip arthroplasty.

Competing risks survival analysis applied to data from the Australian Orthopaedic Association National Joint Replacement Registry

Background and purpose The Kaplan-Meier (KM) method is often used in the analysis of arthroplasty registry data to estimate the probability of revision after a primary procedure. In the presence of a competing risk such as death, KM is known to overestimate the probability of revision. We investigated the degree to which the risk of revision is overestimated in registry data. Patients and methods We compared KM estimates of risk of revision with the cumulative incidence function (CIF), which takes account of death as a competing risk. We considered revision by (1) prosthesis type in subjects aged 75–84 years with fractured neck of femur (FNOF), (2) cement use in monoblock prostheses for FNOF, and (3) age group in patients undergoing total hip arthroplasty (THA) for osteoarthritis (OA). Results In 5,802 subjects aged 75–84 years with a monoblock prosthesis for FNOF, the estimated risk of revision at 5 years was 6.3% by KM and 4.3% by CIF, a relative difference (RD) of 46%. In 9,821 subjects of all ages receiving an Austin Moore (non-cemented) prosthesis for FNOF, the RD at 5 years was 52% and for 3,116 subjects with a Thompson (cemented) prosthesis, the RD was 79%. In 44,365 subjects with a THA for OA who were less than 70 years old, the RD was just 1.4%; for 47,430 subjects > 70 years of age, the RD was 4.6% at 5 years. Interpretation The Kaplan-Meier method substantially overestimated the risk of revision compared to estimates using competing risk methods when the risk of death was high. The bias increased with time as the incidence of the competing risk of death increased. Registries should adopt methods of analysis appropriate to the nature of their data.

Outcome of revision of unicompartmental knee replacement.

Background and purpose Despite concerns regarding a higher risk of revision, unicompartmental knee arthroplasty (UKA) continues to be used as an alternative to total knee arthroplasty (TKA). There are, however, limited data on the subsequent outcome when a UKA is revised. We examined the survivorship for primary UKA procedures that have been revised. Methods We used data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) to analyze the survivorship of 1,948 revisions of primary UKA reported to the Registry between September 1999 and December 2008. This was compared to the results of revisions of primary TKA reported during the same period where both the femoral and tibial components were revised. The Kaplan-Meier method for modeling survivorship was used. Results When a primary UKA was revised to another UKA (both major and minor revisions), it had a cumulative per cent revision (CPR) of 28 and 30 at 3 years, respectively. The CPR at 3 years when a UKA was converted to a TKA was 10. This is similar to the 3-year CPR (12) found earlier for primary TKA where both the femoral and tibial components were revised. Interpretation When a UKA requires revision, the best outcome is achieved when it is converted to a TKA. This procedure does, however, have a major risk of re-revision, which is similar to the risk of re-revision of a primary TKA that has had both the femoral and tibial components revised.

What is the benefit of introducing new hip and knee prostheses

BACKGROUND New joint replacement prostheses are being continually introduced into the market. The underlying purpose of the introduction of new devices is to improve patient outcomes. This study was undertaken to determine how many new prostheses were associated with improved patient outcomes. BACKGROUND Data were obtained from a comprehensive national database. Outcome analysis was performed on all new hip and knee prostheses introduced into the market between January 1, 2003, and December 31, 2007, and used on at least 100 occasions. The findings were compared with the combined results of the three best performing established hip and knee prostheses with a minimum duration of follow-up of five years. The principal outcome measures were the rate of revision per observed component years and the time to first revision, with use of Kaplan-Meier estimates of implant survivorship. RESULTS Most prostheses introduced into the market during the study period were used on fewer than 100 occasions. Analysis of those that had been used in a sufficient number of procedures showed that 27% (nine of thirty-three) of the hip replacements and 29% (eight of twenty-eight) of the knee replacements had a significantly higher rate of revision than the established prostheses. None of the newer prostheses had a lower rate of revision than the established prostheses. CONCLUSION This study indicates that there was no benefit to the introduction of new prostheses into this national market during the five-year study period. Importantly, 30% of the new prostheses were associated with a significantly worse outcome compared with the prostheses with a minimal duration of follow-up of five years.

Early outcomes of patella resurfacing in total knee arthroplasty

Background Patella resurfacing in total knee arthroplasty is a contentious issue. The literature suggests that resurfacing of the patella is based on surgeon preference, and little is known about the role and timing of resurfacing and how this affects outcomes. Methods We analyzed 134,799 total knee arthroplasties using data from the Australian Orthopaedic Association National Joint Replacement Registry. Hazards ratios (HRs) were used to compare rates of early revision between patella resurfacing at the primary procedure (the resurfacing group, R) and primary arthroplasty without resurfacing (no-resurfacing group, NR). We also analyzed the outcomes of NR that were revised for isolated patella addition. Results At 5 years, the R group showed a lower revision rate than the NR group: cumulative per cent revision (CPR) 3.1% and 4.0%, respectively (HR = 0.75, p < 0.001). Revisions for patellofemoral pain were more common in the NR group (17%) than in the R group (1%), and “patella only” revisions were more common in the NR group (29%) than in the R group (6%). Non-resurfaced knees revised for isolated patella addition had a higher revision rate than patella resurfacing at the primary procedure, with a 4-year CPR of 15% and 2.8%, respectively (HR = 4.1, p < 0.001). Interpretation Rates of early revision of primary total knees were higher when the patella was not resurfaced, and suggest that surgeons may be inclined to resurface later if there is patellofemoral pain. However, 15% of non-resurfaced knees revised for patella addition are re-revised by 4 years. Our results suggest an early beneficial outcome for patella resurfacing at primary arthroplasty based on revision rates up to 5 years.

Joint registry approach for identification of outlier prostheses.

Background and purpose Joint Replacement Registries play a significant role in monitoring arthroplasty outcomes by publishing data on survivorship of individual prostheses or combinations of prostheses. The difference in outcomes can be device- or non-device-related, and these factors can be analyzed separately. Although registry data indicate that most prostheses have similar outcomes, some have a higher than anticipated rate of revision when compared to all other prostheses in their class. This report outlines how the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) has developed a method to report prostheses with a higher than expected rate of revision. These are referred to as “outlier” prostheses. Material and methods Since 2004, the AOANJRR has developed a standardized process for identifying outliers. This is based on a 3-stage process consisting of an automated algorithm, an extensive analysis of individual prostheses or combinations by registry staff, and finally a meeting involving a panel from the Australian Orthopaedic Association Arthroplasty Society. Outlier prostheses are listed in the Annual Report as (1) identified but no longer used in Australia, (2) those that have been re-identified and that are still used, and (3) those that are being identified for the first time. Results 78 prostheses or prosthesis combinations have been identified as being outliers using this approach (AOANJRR 2011 Annual Report). In addition, 5 conventional hip prostheses were initially identified, but after further analysis no longer met the defined criteria. 1 resurfacing hip prosthesis was initially identified, subsequently removed from the list, and then re-identified the following year when further data were available. All unicompartmental and primary total knee prostheses identified as having a higher than expected rate of revision have continued to be re-identified. Interpretation It is important that registries use a transparent and accountable process to identify an outlier prosthesis. This paper describes the development, implementation, assessment, and impact of the approach used by the Australian Registry.

Loss to follow-up after arthroplasty: A new use for registry data

We assessed the outcome of patients who were lost to follow-up after arthroplasty by a single surgeon. The aim was to validate the surgeons data set with the Australian Orthopaedic Association National Joint Replacement Registry and determine the outcome of those patients lost to follow-up. Prospective data on patient demographics, operative details and outcomes of the surgeons 1192 primary unicompartmental knee arthroplasty (UKA) procedures were analysed. There were 69 knees in patients who were lost to follow-up, among whom the Registry identified 31 deaths and eight revisions. The cumulative percentage revision (CPR) at seven years using the additional Registry data was 8.8% (95% confidence interval (CI) 7 to 11). Using the surgeons data, the CPR at seven years was 8% (95% CI 6.3 to 10.1) for the best-case scenario where loss to follow-up was excluded, and 16% (95% CI 13.8 to 19.4) for the worst-case scenario, where all patients lost to follow-up were deemed to have been revised. There was a significantly higher mortality rate in those patients lost to follow-up. This study demonstrates that a national joint registry can be used by individual surgeons to establish more accurate revision rates in their arthroplasty patients. This is expected to facilitate a more rigorous audit of surgical outcomes by surgeons and lead to more accurate and uniform reporting of the results of arthroplasty in general.