Livia E. Sima

Differentiation of mesenchymal stem cells onto highly adherent radio frequency-sputtered carbonated hydroxylapatite thin films.

In this work, an improved version of the radio frequency magnetron sputtering (RF-MS) technique was used to prepare highly adherent B-type carbonated hydroxylapatite (B-CHA) thin films. Fourier transform infrared spectroscopy (FTIR) and grazing incidence X-ray diffraction studies proved that the coatings maintained the composition and revealed the polycrystalline structure of HA. Scanning electron microscopy analysis showed that the CHA films are rough and exhibit a homogeneous microstructure. Energy-dispersive X-ray spectroscopy (EDX) mapping demonstrated a uniform distribution of the Ca and P cations while a Ca/P ratio of 1.8 was found. In addition, the FTIR experiments showed a remarkable reproducibility of the nanostructures. Human mesenchymal stem cells (hMSCs), in vitro differentiated osteoblasts, and explanted bone cells were grown over the surface of CHA coatings for periods between a few hours and 21 days. Osteoprogenitor cells maintained viability and characteristic morphology after adhesion on CHA coatings. Ki67-positive osteoblasts were the evidence of cell proliferation events. Cells showed positive staining for markers of osteoblast phenotype such as collagen type I, bone sialoprotein and osteonectin. Our data showed the formation of mineralized foci by differentiation of hMSCs to human primary osteoblasts after cultivation in osteogenic media on RF-sputtered films. The results demonstrate the capacity of B-type CHA coating to support MSCs adhesion and osteogenic differentiation ability.

Levan Nanostructured Thin Films by MAPLE Assembling

Synthesis of nanostructured thin films of pure and oxidized levan exopolysaccharide by matrix-assisted pulsed laser evaporation is reported. Solutions of pure exopolysaccharides in dimethyl sulfoxide were frozen in liquid nitrogen to obtain solid cryogenic pellets that have been used as targets in pulsed laser evaporation experiments with a KrF* excimer source. The expulsed material was collected and assembled onto glass slides and Si wafers. The contact angle studies evidenced a higher hydrophilic behavior in the case of oxidized levan structures because of the presence of acidic aldehyde-hydrogen bonds of the coating formed after oxidation. The obtained films preserved the base material composition as confirmed by Fourier transform infrared spectroscopy. They were compact with high specific surface areas, as demonstrated by scanning electron and atomic force microscopy investigations. In vitro colorimetric assays revealed a high potential for cell proliferation for all coatings with certain predominance for oxidized levan.

Isolation method and xeno-free culture conditions influence multipotent differentiation capacity of human Wharton’s jelly-derived mesenchymal stem cells

IntroductionHuman Wharton’s jelly (WJ) has become a preferred source of mesenchymal stem cells (MSCs) whose clinical applications are limited by the use of adequate xeno-free (XF), in vitro manipulation conditions. Therefore, the objective of our study was to characterize WJ-derived MSCs (WJ-MSCs), isolated by different methods and cultured in a commercially available, MSC XF medium, not least of all by investigating their endothelial differentiation capacity.MethodsWJ explants and enzymatically dissociated WJ cells were cultured in a defined, XF medium for MSCs. Adherent cells at passages 2 and 5 were characterized as MSCs by flow cytometry, MTT, real-time quantitative reverse transcription PCR, and functional multipotent differentiation assays. The endothelial differentiation capacity of MSCs isolated and expanded until passage 2 in the MSC XF medium, and then subcultured for five passages in a commercially available endothelial growth medium (group A), was assessed over serial passages, as compared to adherent WJ-derived cells isolated and expanded for five consecutive passages in the endothelial medium (group B).ResultsThe MSC phenotype of WJ explant- and pellet-derived cells, isolated and expanded in the MSC XF medium, was proven based on the expression of CD44/CD73/CD90/CD105 surface markers and osteo-/adipo-/chondrogenic multipotent differentiation potential, which differed according to the isolation method and/or passage number. Upon exposure to endothelial differentiation cues, cells belonging to group A did not exhibit endothelial cell characteristics over serial passages; by contrast, WJ pellet-derived cells belonging to group B expressed endothelial characteristics at gene, protein and functional levels, potentially due to culture conditions favoring the isolation of other stem/progenitor cell types than MSCs, able to give rise to an endothelial progeny.ConclusionsThe use of defined, MSC XF media for isolation and expansion of human WJ-MSCs is a prerequisite for the establishment of their real endothelial differentiation capacity, as candidates for clinical therapy applications. Thus, the standardization of WJ-MSCs isolation and culture expansion techniques in defined, MSC XF media, for their accurate characterization, would be a priority in the stem cell research field.

Fibronectin layers by matrix-assisted pulsed laser evaporation from saline buffer-based cryogenic targets

The deposition of fibronectin (FN) from saline buffer-based cryogenic targets by matrix-assisted pulsed laser evaporation (MAPLE) onto silicon substrates is reported. A uniform distribution of FN was revealed by Ponceau staining after control experiments on nitrocellulose paper. Well-organized particulates with heights from hundreds of nanometers up to more than 1 μm packed in homogeneous layers were evidenced by optical microscopy and profilometry on Si substrates. Atomic force microscopy images showed regions composed of buffer and FN aggregates forming a compact film. Comparison of infrared spectra of drop-cast and MAPLE-deposited FN confirmed the preservation of composition and showed no degradation of the protein. The protein deposition on Si was confirmed by antibody staining. Small aggregates and fluorescent fibrils were visualized by fluorescence microscopy. Superior attachment of human osteoprogenitor cells cultivated for 3 h proved the presence of stable and intact FN molecules after transfer.

Combinatorial matrix-assisted pulsed laser evaporation: Single-step synthesis of biopolymer compositional gradient thin film assemblies

We introduce a combinatorial approach for the fabrication of organic biopolymer thin films. Structures with compositional gradient are obtained by simultaneous laser vaporization of two distinct targets. Matrix-assisted pulsed laser evaporation deposition method was applied to obtain a compositional library of levan and oxidized levan in form of thin film. The gradient of film composition and structure was demonstrated by infrared spectroscopy while in vitro cell culture assays illustrated characteristic responses of cells to specific surface regions. The method can rapidly generate discrete areas of organic film compositions with improved properties than starting materials.

MAPLE-based method to obtain biodegradable hybrid polymeric thin films with embedded antitumoral agents

In this work, antitumor compounds, lactoferrin [recombinant iron-free (Apo-rLf)], cisplatin (Cis) or their combination were embedded within a biodegradable polycaprolactone (PCL) polymer thin film, by a modified approach of a laser-based technique, matrix-assisted pulsed laser evaporation (MAPLE). The structural and morphological properties of the deposited hybrid films were analyzed by Fourier-transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM). The in vitro effect on the cells’ morphology and proliferation of murine melanoma B16-F10 cells was investigated and correlated with the films’ surface chemistry and topography. Biological assays revealed decreased viability and proliferation, lower adherence, and morphological modifications in the case of melanoma cells cultured on both Apo-rLf and Cis thin films. The antitumor effect was enhanced by deposition of Apo-rLf with Cis within the same film. The unique capability of the new approach, based on MAPLE, to embed antitumor active factors within a biodegradable matrix for obtaining novel biodegradable hybrid platform with increased antitumor efficiency has been demonstrated.

AP-3 and Rabip4' coordinately regulate spatial distribution of lysosomes.

The RUN and FYVE domain proteins rabip4 and rabip4’ are encoded by RUFY1 and differ in a 108 amino acid N-terminal extension in rabip4’. Their identical C terminus binds rab5 and rab4, but the function of rabip4s is incompletely understood. We here found that silencing RUFY1 gene products promoted outgrowth of plasma membrane protrusions, and polarized distribution and clustering of lysosomes at their tips. An interactor screen for proteins that function together with rabip4’ yielded the adaptor protein complex AP-3, of which the hinge region in the β3 subunit bound directly to the FYVE domain of rabip4’. Rabip4’ colocalized with AP-3 on a tubular subdomain of early endosomes and the extent of colocalization was increased by a dominant negative rab4 mutant. Knock-down of AP-3 had an ever more dramatic effect and caused accumulation of lysosomes in protrusions at the plasma membrane. The most peripheral lysosomes were localized beyond microtubules, within the cortical actin network. Our results uncover a novel function for AP-3 and rabip4’ in regulating lysosome positioning through an interorganellar pathway.

Internalization and Intracellular Trafficking of Poly(propylene imine) Glycodendrimers with Maltose Shell in Melanoma Cells

The diagnosis and treatment of malignant melanoma by means of the formulation of active principles with dendrimeric nanoparticles is an area of great current interest. The identification and understanding of molecular mechanisms which ensure the integration of particular dendrimeric nanostructures in tumor cellular environment can provide valuable guidance in their coupling strategies with antitumor or diagnostic agents. Two structurally distinct maltose-shell modified 5th generation (G5) poly(propylene imine) (PPI) glycodendrimers fluorescently labeled, (a) with open maltose shell, cationic charged G5-PPI-OS and (b) with dense maltose shell and nearly neutral G5-PPI-DS, were tested in relation with several melanoma cell lines. We found that three melanoma cell lines internalize G5-PPI-DS structure more efficiently than non tumoral HEK297T cells. Furthermore, the internalization pathways of G5-PPI-OS and G5-PPI-DS are characteristic for each tumor cell phenotype and include more than one mechanism. As a general trend, large amounts of both G5-PPI-OS and G5-PPI-DS are internalized on cholesterol-dependent pathway in MJS primary melanoma cells and on non conventional pathways in SK28 metastatic melanoma cells. G5-PPI-OS, temporarily retained at plasma membrane in both cell lines, is internalized slower in metastatic than in primary phenotype. Unlike G5-PPI-OS, G5-PPI-DS is immediately endocytosed in both cell lines. The unconventional internalization pathway and trafficking, exclusively used by G5-PPI-DS in metastatic cells, is described at molecular level. The decay kinetics of fluorescent labeled G5-PPI-OS and G5-PPI-DS is distinct in the two cellular phenotypes. Both cationic and neutral maltose G5-PPI glycodendrimeric structures represent molecules based on which designing of new formulations for therapy or/and diagnosis of melanoma can be further developed.

Biocompatibility and bioactivity enhancement of Ce stabilized ZrO2 doped HA coatings by controlled porosity change of Al2O3 substrates

Al(2) O(3) substrates with controlled porosity were manufactured from nanosized powders obtained by plasma processing. It was observed that when increasing the sintering temperature the overall porosity was decreasing, but the pores got larger. In a second step, Ce stabilized ZrO(2) doped hydroxyapatite coatings were pulsed laser deposited onto the Al(2) O(3) substrates. It was shown that the surface morphology, consisting of aggregates and particulates in micrometric range, was altered by the substrate porosity and interface properties, respectively. TEM studies evidenced that Ce stabilized ZrO(2) doped HA particulates ranged from 10 to 50 nm, strongly depending on the Al(2) O(3) porosity. The coatings consisted of HA nanocrystals embedded in an amorphous matrix quite similar to the bone structure. These findings were congruent with the increased biocompatibility and bioactivity of these layers confirmed by enhanced growing and proliferation of human mesenchymal stem cells.

The influence of silicon substitution on the properties of spherical- and whisker-like biphasic α-calcium-phosphate/hydroxyapatite particles

In this work, the influence of the morphology of hydroxyapatite particles on silicon substitution through hydrothermal synthesis performed under the same conditions was investigated. Spherical- and whisker-like hydroxyapatite particles were obtained starting from calcium-nitrate, sodium dihydrogen phosphate, disodium-ethylenediaminetetraacetic acid and urea (used only for the synthesis of whisker-like particles) dissolved in aqueous solutions. Silicon was introduced into the solution using tetraethylorthosilicate. X-ray diffraction, infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy and transmission electron microscopy indicate that silicon doping induce different phase compositions and bioactivity of spherical- and whisker-like hydroxyapatite particles obtained under the same hydrothermal conditions. Silicon-substituted, spherical hydroxyapatites particles showed greater phase transformation to silicon-substituted α- calcium-phosphate compared with whiskers-like hydroxyapatite particles synthesized with the same amount of added silicon. Metabolic activity assay performed with SaOs2 osteosarcoma cells showed better biocompatibility of annealed biphasic spherical-like particles compared with annealed whiskerlike particles while dried spherical-like particles induce high cytotoxicity effect.