Luca Casettari

Tight junction modulation by chitosan nanoparticles: Comparison with chitosan solution

Present work investigates the potential of chitosan nanoparticles, formulated by the ionic gelation with tripolyphosphate (TPP), to open the cellular tight junctions and in doing so, improve the permeability of model macromolecules. A comparison is made with chitosan solution at equivalent concentrations. Initial work assessed cytotoxicity (through MTS and LDH assays) of chitosan nanoparticles and solutions on Calu-3 cells. Subsequently, a concentration of chitosan nanoparticles and solution exhibiting minimal toxicity was used to investigate the effect on TEER and macromolecular permeability across filter-cultured Calu-3 monolayer. Chitosan nanoparticles and solution were also tested for their effect on the distribution of the tight junction protein, zonnula occludens-1 (ZO-1). Chitosan nanoparticles produced a sharp and reversible decrease in TEER and increased the permeability of two FITC-dextrans (FDs), FD4 (MW 4 kDa) and FD10 (MW 10 kDa), with effects of a similar magnitude to chitosan solution. Chitosan nanoparticles produced changes in ZO-1 distribution similar to chitosan solution, indicating a tight junction effect. While there was no improvement in permeability with chitosan nanoparticles compared to solution, nanoparticles provide the potential for drug incorporation, and hence the possibility for providing controlled drug release and protection from enzymatic degradation.

Chitosan in nasal delivery systems for therapeutic drugs

There is an obvious need for efficient and safe nasal absorption enhancers for the development of therapeutically efficacious nasal products for small hydrophilic drugs, peptides, proteins, nucleic acids and polysaccharides, which do not easily cross mucosal membranes, including the nasal. Recent years have seen the development of a range of nasal absorption enhancer systems such as CriticalSorb (based on Solutol HS15) (Critical Pharmaceuticals Ltd), Chisys based on chitosan (Archimedes Pharma Ltd) and Intravail based on alkylsaccharides (Aegis Therapeutics Inc.), that is presently being tested in clinical trials for a range of drugs. So far, none of these absorption enhancers have been used in a marketed nasal product. The present review discusses the evaluation of chitosan and chitosan derivatives as nasal absorption enhancers, for a range of drugs and in a range of formulations such as solutions, gels and nanoparticles and finds that chitosan and its derivatives are able to efficiently improve the nasal bioavailability. The revirtew also questions whether chitosan nanoparticles for systemic drug delivery provide any real improvement over simpler chitosan formulations. Furthermore, the review also evaluates the use of chitosan formulations for the improvement of transport of drugs directly from the nasal cavity to the brain, based on its mucoadhesive characteristics and its ability to open tight junctions in the olfactory and respiratory epithelia. It is found that the use of chitosan nanoparticles greatly increases the transport of drugs from nose to brain over and above the effect of simpler chitosan formulations.

Biomedical applications of amino acid-modified chitosans: A review

The presence of reactive primary amines in the backbone structure of chitosan, enables the derivatisation with different functional groups and thereby improving and expanding its properties, such as solubility and mucoadhesiveness, for biomedical applications. Such derivatives can be exploited with good results in a number of biomedical areas, including enhancement of nucleic acid transfection in gene therapy, as well as many other applications aiming to maximize drug delivery and aiding tissue engineering. The aim of this review is to provide an up to date overview of the methods used for derivatizing the chitosan with amino acids and to discuss the characteristics and potential biomedical application of the different amino acid derivatized chitosans described in the literature.

Effect of PEGylation on the toxicity and permeability enhancement of chitosan

The aim of the present work is to investigate if conditions can be devised where PEGylation of chitosan would reduce its toxicity toward the nasal mucosa while maintaining its ability to open the cellular tight junctions and, consequently, produce an enhancement of macromolecular permeability. A series of mPEG-g-chitosan copolymers with varying levels of mPEG substitution, mPEG molecular weight, and chitosan molecular weight were synthesized by grafting carboxylic acid-terminated mPEGs (Mw 1.9 and 5.0 × 10(3) g mol(-1)) to chitosans (Mw 28.9 and 82.0 × 10(3) g mol(-1)) using a NHS/EDC coupling system. The synthesized mPEG-g-chitosans were fully characterized using a number of techniques, including FT-IR, (1)H NMR, and SEC-MALLS and their physicochemical properties were analyzed by TGA and DSC. Thereafter, the conjugates were tested for their cytotoxicity and tight junction modulating property in a relevant cell model, a mucus producing Calu-3 monolayer. mPEG-g-chitosan conjugates exhibited reduced toxicity toward cells, as compared to unmodified chitosan counterparts. Furthermore, the conjugates demonstrated a dramatic effect on cell monolayer transepithelial electrical resistance (TEER) and enhancement of permeability of model macromolecules. TEER and permeability-enhancing effects, as measurable indicators of tight junction modulation, were found to be pH-dependent and were notably more pronounced than those exhibited by unmodified chitosans. This work therefore demonstrates that conditions can be contrived where PEGylation improves the toxicity profile of chitosan, while preserving its effect on epithelial tight junctions in the nose.

Fabrication of novel high performance ductile poly(lactic acid) nanofiber scaffold coated with poly(vinyl alcohol) for tissue engineering applications

Poly(lactic acid) (PLA) nanofiber scaffold has received increasing interest as a promising material for potential application in the field of regenerative medicine. However, the low hydrophilicity and poor ductility restrict its practical application. Integration of hydrophilic elastic polymer onto the surface of the nanofiber scaffold may help to overcome the drawbacks of PLA material. Herein, we successfully optimized the parameters for in situ deposition of poly(vinyl alcohol), (PVA) onto post-electrospun PLA nanofibers using a simple hydrothermal approach. Our results showed that the average fiber diameter of coated nanofiber mat is about 1265±222 nm, which is remarkably higher than its pristine counterpart (650±180 nm). The hydrophilicity of PLA nanofiber scaffold coated with a PVA thin layer improved dramatically (36.11±1.5°) compared to that of pristine PLA (119.7±1.5°) scaffold. The mechanical testing showed that the PLA nanofiber scaffold could be converted from rigid to ductile with enhanced tensile strength, due to maximizing the hydrogen bond interaction during the heat treatment and in the presence of PVA. Cytocompatibility performance of the pristine and coated PLA fibers with PVA was observed through an in vitro experiment based on cell attachment and the MTT assay by EA.hy926 human endothelial cells. The cytocompatibility results showed that human cells induced more favorable attachment and proliferation behavior on hydrophilic PLA composite scaffold than that of pristine PLA. Hence, PVA coating resulted in an increase in initial human cell attachment and proliferation. We believe that the novel PVA-coated PLA nanofiber scaffold developed in this study, could be a promising high performance biomaterial in regeneration medicine.

Effect of temperature increase during the tableting of pharmaceutical materials

Scale-up of tableting process is particularly difficult due to specific concerns related exclusively to the process itself and that cannot be determined on a smaller scale, which are the effect of compression speed and the build-up of heat due to the length of the compaction operations. In this work, it has been simulated the rise of temperature observed during the tablets manufacturing in a full production scale by means of an appropriate modification of a R&D rotary tablet machine. Four common pharmaceutical excipients, characterized by different chemical nature, consolidation behaviour and temperature sensitiveness have been analysed in terms of compaction mechanism (Heckel and energy analysis) and tabletability, in order to verify any effect of the increase of temperature. The results showed a relevance of the temperature on mechanical tablets properties only on materials characterized by low temperature thermal transitions (melting or glass transition), while, for compounds which do not exhibit thermal events at low temperature, it becomes less important for ductile materials and irrelevant for brittle materials. Heckel analysis highlighted a noticeable increase of ductility only in those materials whose tablets mechanical properties depended on the temperature. On the other hand, energy analysis showed low sensitivity failing to identify any temperature effect on compaction materials properties. This work showed how to simulate the process of temperature rise on a small scale and the influence of temperature on materials compaction properties. The use of a modified tableting machine, able to control the temperature and moisture levels and also capable of monitoring the punch movements, resulted in identifying the effect of temperature both on mechanical and compaction properties on materials. Thus, it represents a valuable tool in order to provide useful information at an early stage during the development of tablets formulations.

Characterization of the interaction between chitosan and inorganic sodium phosphates by means of rheological and optical microscopy studies

The physicochemical and rheological properties of chitosan and two different inorganic sodium phosphate dispersions (NaH(2)PO(4) and Na(3)PO(4)) were investigated in order to elucidate the role of different factors, such as ratios between polymer and sodium inorganic phosphates, different pHs and storage stability, on the gelling properties of chitosan. This was deemed opportune since physico-chemical characterizations of chitosan in the literature often appear incomplete and questionable. We also compared the elastic modulus values of the different chitosan/inorganic phosphate systems and examined their behaviour through optical microscopy analyses. The most efficient formulations that showed a thermogelling capacity with a significant gel transition behaviour after 24h were the NaH(2)PO(4)/chitosan and Na(3)PO(4)/chitosan systems at ratio 2 and pH 7.0. These results confirmed the importance of the pH value and ratio selection for the final systems.

Activity of essential oil-based microemulsions against Staphylococcus aureus biofilms developed on stainless steel surface in different culture media and growth conditions

Food safety is a fundamental concern for both consumers and the food industry, especially as the numbers of reported cases of food-associated infections continue to increase. Industrial surfaces can provide a suitable substrate for the development and persistence of bacterial organized in biofilms that represent a potential source of food contamination. The negative consumer perception of chemical disinfectants has shifted the attention to natural substances, such as plant extracts. The aim of this study was to investigate the possibility of using the essential oils (EOs) in the fight against S. aureus biofilms. First, the Minimum Inhibitory Concentration (MIC), Minimum Bactericidal Concentration (MBC), Minimum Biofilm Inhibitory Concentration (MBIC), Minimum Biofilm Eradication Concentration (MBEC) of eleven EOs against S. aureus were determined. Cinnamomum cassia and Salvia officinalis EOs showed the greatest antibacterial properties with 1.25% MIC and MBC, 1.25% MBIC and 2.5% MBEC respectively. Gas Chromatography/Mass Spectrometry analysis revealed cinnamaldehyde (82.66%) and methoxy cinnamaldehyde (10.12%) as the most abundant substances of C. cassia, while cis-thujone (23.90%), camphor (19.22%) and 1.8-cineole (10.62%) of S. officinalis. Three different microemulsions, formulated with C. cassia, S. officinalis or both, were finally tested against S. aureus biofilms in different culture media and growth conditions, causing a >3 logarithmic reductions in S. aureus 24h-old biofilms and desiccated biofilms, and up to 68% of biofilm removal after 90min of exposure. The obtained data suggest the potential use of EOs, alone or in combination, for the formulation of sanitizers as alternative or in support in the disinfection of contaminated surfaces.

Oleanolic Acid Loaded PEGylated PLA and PLGA Nanoparticles with Enhanced Cytotoxic Activity against Cancer Cells.

Oleanolic acid (OA) is a natural triterpenoid with anticancer properties, but its hydrophobic nature and poor aqueous solubility pose challenges in pharmaceutical formulation development. The present study aimed at developing OA-loaded mPEG-PLGA or mPEG-PLA nanoparticles (NPs) to improve the delivery of OA. The NPs were prepared by nanoprecipitation, and their physicochemical properties were characterized. The OA encapsulation efficiency of the NPs was between 40 and 75%. The size of the OA-loaded NPs was around 200-250 nm, which fell within the range required for tumor targeting by means of the enhanced permeability and retention (EPR) effect, and the negatively charged NPs remained physically stable for over 20 weeks with no aggregation observed. The OA-loaded NPs produced significant cytotoxic effects through apoptosis in cancer cell lines. Overall, the OA-loaded mPEG-PLGA NPs and mPEG-PLA NPs shared similar physicochemical properties. The former, especially the OA-loaded mPEG-P(D,L)LGA NPs, were more cytotoxic to cancer cells and therefore were more efficient for OA delivery.

Poloxamer Thermogel Systems as Medium for Crystallization

ABSTRACTPurposeTo prepare a thermoreversible gel system able to work as a medium for crystallization at around 20°C, allowing easy retrieval of crystals by simply decreasing the gel temperature. Lactose was selected has model substance for crystallization.MethodsWater solutions with different% of poloxamer 407, α-Lactose monohydrate, and ethanol were prepared and analysed by rheology to understand how the different components alter the gelling temperature. The systems with the required characteristics for lactose crystallization were prepared and the crystals recovered by cooling and then filtering the dispersion.ResultsRheological analysis showed interaction between the poloxamer and lactose. Increasing the quantity of poloxamer or lactose lowered the gelation temperature while the addition of small amounts of ethanol had a modest effect on the same property. These data were used to identify the ideal concentration of the components in order to prepare a system matching the features of our purpose. Such system yielded high quality crystals, with well-defined geometry and narrow particle size distribution.ConclusionPoloxamer is a very interesting polymer in that it is able to generate a reversible gelling medium from which crystals can be harvested by filtering, without the addition of any chemicals to promote the sol–gel transition.