Luca Goldoni
Istituto Italiano di Tecnologia
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Luca Goldoni.
Journal of Medicinal Chemistry | 2012
Elena Simoni; Simona Daniele; Giovanni Bottegoni; Daniela Pizzirani; Maria Letizia Trincavelli; Luca Goldoni; Glauco Tarozzo; Angelo Reggiani; Claudia Martini; Daniele Piomelli; Carlo Melchiorre; Michela Rosini; Andrea Cavalli
Herein we report on a novel series of multitargeted compounds obtained by linking together galantamine and memantine. The compounds were designed by taking advantage of the crystal structures of acetylcholinesterase (AChE) in complex with galantamine derivatives. Sixteen novel derivatives were synthesized, using spacers of different lengths and chemical composition. The molecules were then tested as inhibitors of AChE and as binders of the N-methyl-d-aspartate (NMDA) receptor (NMDAR). Some of the new compounds were nanomolar inhibitors of AChE and showed micromolar affinities for NMDAR. All compounds were also tested for selectivity toward NMDAR containing the 2B subunit (NR2B). Some of the new derivatives showed a micromolar affinity for NR2B. Finally, selected compounds were tested using a cell-based assay to measure their neuroprotective activity. Three of them showed a remarkable neuroprotective profile, inhibiting the NMDA-induced neurotoxicity at subnanomolar concentrations (e.g., 5, named memagal, IC(50) = 0.28 nM).
ACS energy letters | 2016
Ahmed L. Abdelhady; Sara Accornero; M. Arciniegas; Luca Goldoni; Ajay Ram Srimath Kandada; Annamaria Petrozza; Liberato Manna
We report chemical routes for the synthesis of both nanocrystals and bulk crystals of methylammonium (MA) lead halide perovskites employing N-methylformamide (NMF) as a source of MA ions. Colloidal nanocrystals were prepared by a transamidation reaction between NMF and an alkyl amine (oleylamine). The nanocrystals showed photoluminescence quantum yields reaching 74% for MAPbBr3 and 60% for MAPbI3. Bulk crystals were grown at room temperature, with no need for an antisolvent, by the acid hydrolysis of NMF. Important advantages of using NMF instead of MA salts are that the syntheses involve fewer steps and less toxic and less expensive chemicals.
Journal of the American Chemical Society | 2018
Muhammad Imran; Vincenzo Caligiuri; Mengjiao Wang; Luca Goldoni; Mirko Prato; Roman Krahne; Luca De Trizio; Liberato Manna
We propose here a new colloidal approach for the synthesis of both all-inorganic and hybrid organic–inorganic lead halide perovskite nanocrystals (NCs). The main limitation of the protocols that are currently in use, such as the hot injection and the ligand-assisted reprecipitation routes, is that they employ PbX2 (X = Cl, Br, or I) salts as both lead and halide precursors. This imposes restrictions on being able to precisely tune the amount of reaction species and, consequently, on being able to regulate the composition of the final NCs. In order to overcome this issue, we show here that benzoyl halides can be efficiently used as halide sources to be injected in a solution of metal cations (mainly in the form of metal carboxylates) for the synthesis of APbX3 NCs (in which A = Cs+, CH3NH3+, or CH(NH2)2+). In this way, it is possible to independently tune the amount of both cations and halide precursors in the synthesis. The APbX3 NCs that were prepared with our protocol show excellent optical properties, such as high photoluminescence quantum yields, low amplified spontaneous emission thresholds, and enhanced stability in air. It is noteworthy that CsPbI3 NCs, which crystallize in the cubic α phase, are stable in air for weeks without any postsynthesis treatment. The improved properties of our CsPbX3 perovskite NCs can be ascribed to the formation of lead halide terminated surfaces, in which Cs cations are replaced by alkylammonium ions.
Analytical Biochemistry | 2016
Luca Goldoni; Tiziana Beringhelli; Walter Rocchia; Natalia Realini; Daniele Piomelli
Absolute analyte quantification by nuclear magnetic resonance (NMR) spectroscopy is rarely pursued in metabolomics, even though this would allow researchers to compare results obtained using different techniques. Here we report on a new protocol that permits, after pH-controlled serum protein removal, the sensitive quantification (limit of detection [LOD] = 5-25 μM) of hydrophilic nutrients and metabolites in the extracellular medium of cells in cultures. The method does not require the use of databases and uses PULCON (pulse length-based concentration determination) quantitative NMR to obtain results that are significantly more accurate and reproducible than those obtained by CPMG (Carr-Purcell-Meiboom-Gill) sequence or post-processing filtering approaches. Three practical applications of the method highlight its flexibility under different cell culture conditions. We identified and quantified (i) metabolic differences between genetically engineered human cell lines, (ii) alterations in cellular metabolism induced by differentiation of mouse myoblasts into myotubes, and (iii) metabolic changes caused by activation of neurotransmitter receptors in mouse myoblasts. Thus, the new protocol offers an easily implementable, efficient, and versatile tool for the investigation of cellular metabolism and signal transduction.
RSC Advances | 2015
Ilaria Romano; Elisa Mele; José A. Heredia-Guerrero; Luca Ceseracciu; Hadi Hajiali; Luca Goldoni; Lara Marini; Athanassia Athanassiou
The availability of nanofibrous substrates with engineered properties, such as controlled porosity, mechanical conformability, biodegradation profile and drug release, is of strategic importance in the biomedical sector. Here, we demonstrate that N-methacrylate glycol chitosan, a photo-polymerisable, biocompatible and water-soluble derivative of chitosan, can be easily processed to create non-woven mats of nanofibres with controlled physicochemical characteristics. The produced fibrous mats are characterised by thermal stability, Youngs modulus of 140 MPa and ultimate strength of 4 MPa. The degree of cross-linking of the realised fibres regulates their durability and degradation profile under conditions of high humidity, but also allows controlling the delivery over time of active agents encapsulated inside the fibres. We demonstrate that the N-methacrylate glycol chitosan nanofibres are able to release an antimicrobial drug within 24 hours. Moreover, cells proliferation of 85% indicates that non-cytotoxic substances were released from the electrospun mats.
Journal of Tissue Engineering and Regenerative Medicine | 2018
Benjamin B. Rothrauff; Luca Coluccino; Riccardo Gottardi; Luca Ceseracciu; Silvia Scaglione; Luca Goldoni; Rocky S. Tuan
Tissue engineering using adult mesenchymal stem cells (MSCs), a promising approach for cartilage repair, is highly dependent on the nature of the matrix scaffold. Thermoresponsive, photocrosslinkable hydrogels were fabricated by functionalizing pepsin‐soluble decellularized tendon and cartilage extracellular matrices (ECM) with methacrylate groups. Methacrylated gelatin hydrogels served as controls. When seeded with human bone marrow MSCs and cultured in chondrogenic medium, methacrylated ECM hydrogels experienced less cell‐mediated contraction, as compared against non‐methacrylated ECM hydrogels. However, methacrylation slowed or diminished chondrogenic differentiation of seeded MSCs, as determined through analyses of gene expression, biochemical composition and histology. In particular, methacrylated cartilage hydrogels supported minimal due to chondrogenesis over 42 weeks, as hydrogel disintegration beginning at day 14 presumably compromised cell–matrix interactions. As compared against methacrylated gelatin hydrogels, MSCs cultured in non‐methacrylated ECM hydrogels exhibited comparable expression of chondrogenic genes (Sox9, Aggrecan and collagen type II) but increased collagen type I expression. Non‐methacrylated cartilage hydrogels did not promote chondrogenesis to a greater extent than either non‐methacrylated or methacrylated tendon hydrogels. Whereas methacrylated gelatin hydrogels supported relatively homogeneous increases in proteoglycan and collagen type II deposition throughout the construct over 42 days, ECM hydrogels possessed greater heterogeneity of staining intensity and construct morphology. These results do not support the utility of pepsin‐solubilized cartilage and tendon hydrogels for cartilage tissue engineering over methacrylated gelatin hydrogels. Methacrylation of tendon and cartilage ECM hydrogels permits thermal‐ and light‐induced polymerization but compromises chondrogenic differentiation of seeded MSCs.
ACS Nano | 2018
Luca Goldoni; Quinten A. Akkerman; Zhiya Dang; Ali Hossain Khan; Sergio Marras; Iwan Moreels; Liberato Manna
A binary ligand system composed of aliphatic carboxylic acids and primary amines of various chain lengths is commonly employed in diverse synthesis methods for CsPbBr3 nanocrystals (NCs). In this work, we have carried out a systematic study examining how the concentration of ligands (oleylamine and oleic acid) and the resulting acidity (or basicity) affects the hot-injection synthesis of CsPbBr3 NCs. We devise a general synthesis scheme for cesium lead bromide NCs which allows control over size, size distribution, shape, and phase (CsPbBr3 or Cs4PbBr6) by combining key insights on the acid–base interactions that rule this ligand system. Furthermore, our findings shed light upon the solubility of PbBr2 in this binary ligand system, and plausible mechanisms are suggested in order to understand the ligand-mediated phase control and structural stability of CsPbBr3 NCs.
Carbohydrate Polymers | 2017
José A. Heredia-Guerrero; Luca Goldoni; José J. Benítez; Alexander Davis; Luca Ceseracciu; Roberto Cingolani; Ilker S. Bayer; Thomas Heinze; Andreas Koschella; Antonio Heredia; Athanassia Athanassiou
The synthesis of microcrystalline cellulose (MCC) and 9,10,16-hydroxyhexadecanoic (aleuritic) acid ester-based bioplastics was investigated through acylation in a mixed anhydride (trifluoroacetic acid (TFA)/trifluoroacetic acid anhydride (TFAA)), chloroform co-solvent system. The effects of chemical interactions and the molar ratio of aleuritic acid to the anhydroglucose unit (AGU) of cellulose were investigated. The degree of substitution (DS) of new polymers were characterized by two-dimensional solution-state NMR and ranged from 0.51 to 2.60. The chemical analysis by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) confirmed the presence of aleuritate groups in the structure induces the formation of new H-bond networks. The tensile analysis and the contact angle measurement confirmed the ductile behavior and the hydrophobicity of the prepared bioplastics. By increasing the aleuritate amounts, the glass transition temperature decreased and the solubility of bioplastic films in most common solvents was improved. Furthermore, this new polymer exhibits similar properties compared to commercial cellulose derivatives.
Data in Brief | 2016
Luca Goldoni; Tiziana Beringhelli; Walter Rocchia; Natalia Realini; Daniele Piomelli
The NMR spectra and data reported in this article refer to the research article titled “A simple and accurate protocol for absolute polar metabolite quantification in cell cultures using q-NMR” [1]. We provide the 1H q-NMR spectra of cell culture media (DMEM) after removal of serum proteins, which show the different efficiency of various precipitating solvents, the solvent/DMEM ratios, and pH of the solution. We compare the data of the absolute nutrient concentrations, measured by PULCON external standard method, before and after precipitation of serum proteins and those obtained using CPMG (Carr-Purcell-Meiboom-Gill) sequence or applying post-processing filtering algorithms to remove, from the 1H q-NMR spectra, the proteins signal contribution. For each of these approaches, the percent error in the absolute value of every measurement for all the nutrients is also plotted as accuracy assessment.
Journal of the American Chemical Society | 2018
Olivia J. Ashton; Luca Goldoni; Daniela Maggioni; Urko Petralanda; Nimai Mishra; Quinten A. Akkerman; Ivan Infante; Henry J. Snaith; Liberato Manna
We report an amine-free synthesis of lead halide perovskite (LHP) nanocrystals, using trioctylphosphine oxide (TOPO) instead of aliphatic amines, in combination with a protic acid (e.g., oleic acid). The overall synthesis scheme bears many similarities to the chemistry behind the preparation of LHP thin films and single crystals, in terms of ligand coordination to the chemical precursors. The acidity of the environment and hence the extent of protonation of the TOPO molecules tune the reactivity of the PbX2 precursor, regulating the size of the nanocrystals. On the other hand, TOPO molecules are virtually absent from the surface of our nanocrystals, which are simply passivated by one type of ligand (e.g., Cs-oleate). Furthermore, our studies reveal that Cs-oleate is dynamically bound to the surface of the nanocrystals and that an optimal surface coverage is critical for achieving high photoluminescence quantum yield. Our scheme delivers NCs with a controlled size and shape: only cubes are formed, with no contamination with platelets, regardless of the reaction conditions that were tested. We attribute such a shape homogeneity to the absence of primary aliphatic amines in our reaction environment, since these are known to promote the formation of nanocrystals with sheet/platelet morphologies or layered phases under certain reaction conditions. The TOPO route is particularly appealing with regard to synthesizing LHP nanocrystals for large-scale manufacturing, as the yield in terms of material produced is close to the theoretical limit: i.e., almost all precursors employed in the synthesis are converted into nanocrystals.