Luca Roselli

Accurate and efficient circuit simulation with lumped-element FDTD technique

A three-dimensional (3-D) implementation of the lumped-element finite-difference time-domain (FDTD) algorithm has been carried out. To accomplish proper description of device dynamic responses, the code incorporates accurate models of lumped bipolar devices, including nonlinear capacitances associated with pn and Schottky junctions. The nonlinear system arising from discretized lumped-element equations is solved by means of an iterative Newton-Raphson algorithm, the convergence properties of which are sensitive to the value of the simulation time step. The computational efficiency of the algorithm (as well as its robustness) has significantly been enhanced by introducing an adaptive time-step algorithm, which dynamically adjusts the time-step itself to ensure convergence during the simulation. Several simulation examples are compared with conventional analysis techniques and demonstrate the algorithm reliability as well as its increased efficiency.

Inkjet Printed, Self Powered, Wireless Sensors for Environmental, Gas, and Authentication-Based Sensing

In this paper, inkjet-printed flexible sensors fabricated on paper substrates are introduced as a system-level solution for ultra-low-cost mass production of UHF Radio Frequency Identification (RFID) Tags and wireless sensor nodes in a “green” approach that could be easily extended to other microwave and wireless applications. The authors briefly touch up the state-of-the-art area of fully integrated wireless sensor modules on paper and show several active and power scavenging platforms to power on wireless sensors that could potentially set the foundation for the truly convergent wireless sensor ad hoc networks of the future.

Analog laser predistortion for multiservice radio-over-fiber systems

We have developed some low-cost predistortion circuits to compensate second- and third-order laser distortions in multiservice radio-over-fiber industrial systems. Depending on the predistorter configuration implemented, average reductions of 10-15 dB and of 8-10 dB have been observed in the laser second- and third-order distortions, respectively, within the cellular bands relevant to the European TETRA, GSM, and DCS standards. In particular, the development of the prototypes here illustrated is based on a new and original procedure that formalizes and suitably integrates in a sinergistic way modeling, design, and experimental activities.

Modeling and characterization of the bonding-wire interconnection

In this paper, the bonding-wire interconnection has been studied from the points of view of its modeling and electrical characterization. Both singleand double-wire structures have been considered, the latter under the assumption of parallel wires. Two electrical models of the bonding wire are discussed. First, the finite-difference time-domain (FDTD) method is proposed for the rigorous analysis of such structures. This method uses a suitable discretization technique, which accounts for the wire curvature by means of a polygonal approximation. A quasi-static model of the bonding wire, suitable for commercial microwave computer-aided-design tools is then proposed. This model is based on the representation of the structure with four sections of a uniform transmission line and the model parameters are evaluated analytically from the dimensions of the interconnection. Accuracy and applicability of the quasi-static model have been assessed by analyzing several test structures, the reference results being obtained with the FDTD method. Finally, the quasi-static model has been used to provide an extensive electrical characterization of the bonding wire versus its main geometrical parameters. This characterization is given in terms of an equivalent series inductance and two equivalent shunt capacitances forming a /spl pi/ low-pass network. This representation is particularly useful in the matching of the bonding-wire discontinuity.

A new algorithm for the incorporation of arbitrary linear lumped networks into FDTD simulators

The inclusion of lumped elements, both linear and nonlinear, into the finite-difference time-domain (FDTD) algorithm has been recently made possible by the introduction of the lumped element FDTD method. Such a method, however, cannot efficiently and accurately account for two-terminal networks made of several lumped elements, arbitrarily connected together. This limitation can be removed as proposed in this paper by describing the network in terms of its impedance in the Laplace domain and by using appropriate digital signal-processing methodologies to fit the resulting description to Yees algorithm. The resulting difference equations allow an arbitrary two-terminal network to be inserted into one FDTD cell, preserving the full explicit nature of the conventional FDTD scheme and requiring a minimum number of additional storage variables. The new approach has been validated by comparison with the exact solution of a parallel-plate waveguide loaded with lumped networks in the transverse plane.

No Battery Required: Perpetual RFID-Enabled Wireless Sensors for Cognitive Intelligence Applications

Over the last decade, radio frequency identification (RFID) systems have been increasingly used for identification and object tracking due to their low-power, low-cost wireless features. In addition, the explosive demand for ubiquitous rugged low-power, compact wireless sensors for Internet-of-Things, ambient intelligence, and biomonitoring/ quality-of-life application has sparked a plethora of research efforts to integrate sensors with an RFID-enabled platform. The rapid evolution of large-area electronics printing technologies (e.g., ink-jet printing and gravure printing) has enhanced the development of low-cost RFID-enabled sensors as well as accelerated their large-scale deployment. This article presents a brief overview of the recent progress in the area of RFID-based sensor systems and especially the state-of-the-art RFID-enabled wireless sensor tags realized through the use of ink-jet printing technology.

A simple way to model curved metal boundaries in FDTD algorithm avoiding staircase approximation

The conventional FDTD algorithm in Cartesian coordinates uses staircase approximation to treat curvilinear surfaces. This approximation causes loss of accuracy often unacceptable. An extremely simple and more accurate polygonal approximation of curved surfaces is proposed in this paper. The method improves significantly the accuracy of the original FDTD algorithm, without increasing its complexity. >

A New Contactless Assembly Method for Paper Substrate Antennas and UHF RFID Chips

This paper deals with a low-cost method for the assembly of flexible substrate antennas and UHF RF identification silicon (Si) chips. Such a method exploits a magnetic coupling mechanism, thus not requiring for galvanic contacts between the Si chip and antenna itself. The magnetic coupling is established by a planar transformer, the primary and secondary windings of which are implemented on flexible substrate and Si chip, respectively. As a result, the Si chip can be assembled on the antenna with a mere placing and gluing process. First, the idea has been validated by theory. Electromagnetic simulations of a square heterogeneous transformer (1.0-mm side) show a maximum available power gain (MAG) of -0.4 dB at 868 MHz. In addition, the heterogeneous transformer is also quite tolerant with respect to misalignment between primary and secondary. An offset error of 150 μm reduces the MAG to - 0.5 dB. A sub-optimal matching strategy, exploiting a simple on-chip capacitor, is then developed for antennas with 50- Ω input impedances. Finally, the idea has been experimentally validated exploiting printed circuit board (PCB) prototypes. A PCB transformer (1.5-mm side) and a transformer rectifier (two-diode Dickson multiplier) have been fabricated and tested. Measurements indicates a MAG of -0.3 dB at 868 MHz for the transformer and the capability of the developed rectifier to supply a 220-kΩ load at 1.5 V with a - 2-dBm input power.

Microwave Circuits in Paper Substrates Exploiting Conductive Adhesive Tapes

In this work, a new technique to fabricate microwave circuits in paper substrates is proposed. This technique relies on a copper adhesive tape that is shaped by a photo-lithographic process and then transferred to the hosting substrate by means of a sacrificial layer. Microstrip lines in paper substrates have been electromagnetically characterized accounting also for the adhesive layers. Experimental results show an insertion loss better than 0.6 dB/cm at 10 GHz.

Optimum mesh grading for finite-difference method

The coarseness error of the finite-difference (FD) method is studied analyzing a typical planar waveguide and a rectangular coaxial geometry. Results for equidistant and graded mesh are compared in terms of accuracy and numerical efforts. Because of the field singularities involved a graded mesh proves to be superior compared to the equidistant case. A grading strategy with optimum efficiency is presented. Furthermore, the results show that the most significant improvement in accuracy can be obtained by incorporating the edge behavior into the FD scheme.