Lucy Vojtová

Synthesis, characterization and antibacterial activity of new fluorescent chitosan derivatives

The present work aims to the development of innovative new derivatives of chitosan that can be used for medical applications. This innovation is based on the synthesis and characterization of chitosan-g-aminoanthracene derivatives. Thus, N-(anthracen-9-yl)-4,6-dichloro-[1,3,5]-triazin-2-amine (AT) reacted with chitosan by the following steps: at first, cyanuric chloride reacted with 9-aminoanthracene to obtain N-(anthracen-9-yl)-4,6-dichloro-[1,3,5]-triazin-2-amine (AT), then the AT reacted with chitosan to obtain (CH-g-AT). The final product of CH-g-AT was separated, purified and re-crystallized by dioxane. The structure of the prepared chitosan derivatives was confirmed by FTIR-ATR, solid-NMR, TGA, X-RD, and DSC. The new chitosan derivatives showed fluorescence spectra in liquid and in solid state as well. CH-g-AT showed also high antibacterial activity against gram -ve species (Escherichia coli).

Optimized conditions for mesenchymal stem cells to differentiate into osteoblasts on a collagen/hydroxyapatite matrix.

Collagen/hydroxyapatite (HA) composite scaffolds are known to be suitable scaffolds for seeding with mesenchymal stem cells (MSCs) differentiated into osteoblasts and for the in vitro production of artificial bones. However, the optimal collagen/HA ratio remains unclear. Our study confirmed that a higher collagen content increased scaffold stiffness but that a greater stiffness was not sufficient for bone tissue formation, a complex process evidently also dependent on scaffold porosity. We found that the scaffold pore diameter was dependent on the concentration of collagen and HA and that it could play a key role in cell seeding. In conclusion, the optimal scaffold for new bone formation and cell proliferation was found to be a composite scaffold formed from 50 wt % HA in 0.5 wt % collagen I solution.

Collagen/hydroxyapatite scaffold enriched with polycaprolactone nanofibers, thrombocyte-rich solution and mesenchymal stem cells promotes regeneration in large bone defect in vivo

A three-dimensional scaffold of type I collagen and hydroxyapatite enriched with polycaprolactone nanofibers (Coll/HA/PCL), autologous mesenchymal stem cells (MSCs) in osteogenic media, and thrombocyte-rich solution (TRS) was an optimal implant for bone regeneration in vivo in white rabbits. Nanofibers optimized the viscoelastic properties of the Coll/HA scaffold for bone regeneration. MSCs and TRS in the composite scaffold improved bone regeneration. Three types of Coll/HA/PCL scaffold were prepared: an MSC-enriched scaffold, a TRS-enriched scaffold, and a scaffold enriched with both MSCs and TRS. These scaffolds were implanted into femoral condyle defects 6 mm in diameter and 10-mm deep. Untreated defects were used as a control. Macroscopic and histological analyses of the regenerated tissue from all groups were performed 12 weeks after implantation. The highest volume and most uniform distribution of newly formed bone occurred in defects treated with scaffolds enriched with both MSCs and TRS compared with that in defects treated with scaffolds enriched by either component alone. The modulus of elasticity in compressive testing was significantly higher in the Coll/HA/PCL scaffold than those without nanofibers. The composite Coll scaffold functionalized with PCL nanofibers and enriched with MSCs and TRS appears to be a novel treatment for bone defects.

Preparation and modification of collagen-based porous scaffold for tissue engineering

In the effort to generate cartilage tissues using mesenchymal stem cells, porous scaffolds with prescribed biomechanical properties were prepared. Scaffolds with interconnected pores were prepared via lyophilisation of frozen hydrogels made from collagen modified with chitosan nanofibres, hyaluronic acid, copolymers based on poly(ethylene glycol) (PEG), poly(lactic-co-glycolic acid) (PLGA), and itaconic acid (ITA), and hydroxyapatite nanoparticles. The modified collagen compositions were cross-linked using N-(3-dimethylamino propyl)-N′-ethylcarbodiimide hydrochloride (EDC) combined with N-hydroxysuccinimide (NHS) in water solution. Basic physicochemical and mechanical properties were measured and an attempt to relate these properties to the molecular and supermolecular structure of the modified collagen compositions was carried out. Scaffolds containing hydrophilic chitosan nanofibres showed the highest swelling ratio (SR = 20–25) of all the materials investigated, while collagen modified with an amphiphilic PLGA-PEG-PLGA copolymer or functionalised with ITA exhibited the lowest swelling ratio (SR = 5–8). The best resistance to hydrolytic degradation was obtained for hydroxyapatite containing scaffolds. On the other hand, the fastest degradation rate was observed for synthetic copolymer-containing scaffolds. The results showed that the addition of hydroxyapatite or hyaluronic acid to the collagen matrix increases the rigidity in comparison to the collagen-chitosan scaffold. Collagen scaffold modified with hyaluronic acid presented reduced deformation at break while the presence of hydroxypatatite enhanced the scaffold deformation under tensile loading. The tensile elastic modulus of chitosan nanofibre collagen scaffold was the lowest but closest to the articular cartilage; however, the strength and deformation to failure increased up to 200 %.

Collagen-grafted ultra-high molecular weight polyethylene for biomedical applications

A novel material for hard tissue implants has been prepared. The ultra-high molecular weight polyethylene (UHMWPE) was grafted with collagen I, to improve its biocompatibility with soft tissue in case of its usage in bone engineering. Before collagen immobilization, commercial grade UHMWPE was treated with air plasma to introduce hydroperoxides onto the surface and subsequently grafted with carboxylic acid to functionalize the surface. Acrylic acid and itaconic acid were used for surface functionalization. After graft polymerization of carboxylic acids, collagen was immobilized covalently through the amide bonds between residual amino and carboxyl groups in the presence of water-soluble carbodiimide/hydroxysuccinimide cross-linking system. Each step of modification was characterized using spectroscopic (EPR, ATR-FTIR, and XPS), microscopic (SEM and CLSM), and contact angle measurement methods. The experimental results showed that plasma treatment led to a generation of free radicals on the UHMWPE surface resulting in the formation of unstable hydroperoxides. These reactive species were used to graft unsaturated carboxylic acids onto UHMWPE. Consequently, collagen was grafted via the-NH2 and-COOH reaction. The obtained experimental data along with microscopic observations confirmed the success of graft poly-merization of itaconic as well as of acrylic acid and collagen immobilization onto the UHMWPE surface.

Novel electrospun gelatin/oxycellulose nanofibers as a suitable platform for lung disease modeling

Novel hydrolytically stable gelatin nanofibers modified with sodium or calcium salt of oxycellulose were prepared by electrospinning method. The unique inhibitory effect of these nanofibers against Escherichia coli bacteria was examined by luminometric method. Biocompatibility of these gelatin/oxycellulose nanofibers with eukaryotic cells was tested using human lung adenocarcinoma cell line NCI-H441. Cells firmly adhered to nanofiber surface, as determined by scanning electron microscopy, and no signs of cell dying were detected by fluorescent live/dead assay. We propose that the newly developed gelatin/oxycellulose nanofibers could be used as promising scaffold for lung disease modeling and anti-cancer drug testing.

Biodegradation of polyether‐polyol‐based polyurethane elastomeric films: influence of partial replacement of polyether polyol by biopolymers of renewable origin

In this work we investigated the degradation process of polyether‐polyol‐based polyurethane (PUR) elastomeric films in the presence of a mixed thermophilic culture as a model of a natural bacterial consortium. The presence of PUR material in cultivation medium resulted in delayed but intensive growth of the bacterial culture. The unusually long lag phase was caused by the release of unreacted polyether polyol and tin catalyst from the material. The lag phase was significantly shortened and the biodegradability of PUR materials was enhanced by partial replacement (10%) of polyether polyol with biopolymers (carboxymethyl cellulose, hydroxyethyl cellulose, acetyl cellulose and actylated starch). The process of material degradation consisted of two steps. First, the materials were mechanically disrupted and, second, the bacterial culture was able to utilize abiotic degradation products, which resulted in supported bacterial growth. Direct utilization of PUR by the bacterial culture was observed as well, but the bacterial culture contributed only slightly to the total mass losses. The only exception was PUR material modified by acetyl cellulose. In this case, direct biodegradation represented the major mechanism of material decomposition. Moreover, PUR material modified by acetyl cellulose did not tend to undergo abiotic degradation. In conclusion, the modification of PUR by proper biopolymers is a promising strategy for reducing potential negative effects of waste PUR materials on the environment and enhancing their biodegradability.

Preparation and ecotoxicity assessment of new biodegradable polyurethane foams

Flexible biodegradable polyurethane foams (BIO-PUR) were prepared by a one-shot process using commercially available coreactants and modified by substituting biodegradable additive based on the acetylated starch (AS), acetylcellulose (AC), 2-hydroxyethylcellulose (HEC) and carboxymethylcellulose sodium salt (CMC) for 5 or 10 wt% of commercial polyether polyol. The BIO-PUR foams were characterized by FTIR, TGA and polarization microscopy. Ecotoxicity of BIO-PUR foams freshwater extracts was evaluated using the alternative crustacean toxicity test Thamnotoxkit F. Values of toxicity were expressed as percentage mortality of the instars II–III larvae of freshwater fairy shrimps (Thamnocephalus platyurus) dependence on the effect criterion of the respective assay. The leaches of BIO-PUR foams modified with 5 or 10 wt% of HEC showed higher toxicity then other BIO-PUR foams, whereas leaches of BIO-PUR with 5wt% of AS and 10wt% of AC were even less toxic than REF. PUR foam.

Hydrolytic stability of end-linked hydrogels from PLGA–PEG–PLGA macromonomers terminated by α,ω-itaconyl groups

Biodegradable amphiphilic PLGA–PEG–PLGA triblock copolymers end-terminated with itaconic acid (ITA) having reactive double bonds were synthesized by ring opening polymerization. The prepared α,ω-itaconyl-PLGA–PEG–PLGA telechelic macromonomers were additionally covalently crosslinked under an inert atmosphere by blue light irradiation without the use of a further cross-linker resulting in end-linked polymeric networks. The effects of the ITA amount attached to the α,ω-itaconyl-PLGA–PEG–PLGA copolymers and the crosslinking time on swelling behaviours and hydrolytic stability of the prepared well-defined polymeric network were investigated. Physicochemical properties were characterized by proton and carbon nuclear magnetic resonance spectroscopy (1H NMR, 13C NMR), proton nuclear magnetic resonance relaxometry, attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). It was found that the hydrolytic stability of ITA modified PLGA–PEG–PLGA end-linked hydrogels enhances with both increasing the time of crosslinking and the amount of double bonds attached to α,ω-itaconyl-PLGA–PEG–PLGA polymer chains. In comparison with the original un-crosslinked α,ω-itaconyl-PLGA–PEG–PLGA copolymer, the hydrolytic stability of the end-linked hydrogels significantly increased. Three kinds of water fractions (unbound, weakly and strongly bonded) were determined by proton NMR relaxometry in hydrogels containing 63 mol% of ITA crosslinked for 40 minutes. Even for hydrogels surviving 32 days in water the NMR relaxometry showed structural collapse of the hydrogel probably due to breaking of end-linked nodes followed by hydrolysis faster than water diffusion after day 15 of immersion. End-linked α,ω-itaconyl-PLGA–PEG–PLGA hydrogels can be used in medical, biological or tissue engineering applications.

Accurate micro-computed tomography imaging of pore spaces in collagen-based scaffold

In this work we have used X-ray micro-computed tomography (μCT) as a method to observe the morphology of 3D porous pure collagen and collagen-composite scaffolds useful in tissue engineering. Two aspects of visualizations were taken into consideration: improvement of the scan and investigation of its sensitivity to the scan parameters. Due to the low material density some parts of collagen scaffolds are invisible in a μCT scan. Therefore, here we present different contrast agents, which increase the contrast of the scanned biopolymeric sample for μCT visualization. The increase of contrast of collagenous scaffolds was performed with ceramic hydroxyapatite microparticles (HAp), silver ions (Ag+) and silver nanoparticles (Ag-NPs). Since a relatively small change in imaging parameters (e.g. in 3D volume rendering, threshold value and μCT acquisition conditions) leads to a completely different visualized pattern, we have optimized these parameters to obtain the most realistic picture for visual and qualitative evaluation of the biopolymeric scaffold. Moreover, scaffold images were stereoscopically visualized in order to better see the 3D biopolymer composite scaffold morphology. However, the optimized visualization has some discontinuities in zoomed view, which can be problematic for further analysis of interconnected pores by commonly used numerical methods. Therefore, we applied the locally adaptive method to solve discontinuities issue. The combination of contrast agent and imaging techniques presented in this paper help us to better understand the structure and morphology of the biopolymeric scaffold that is crucial in the design of new biomaterials useful in tissue engineering.