Josef Jančář

Optimized conditions for mesenchymal stem cells to differentiate into osteoblasts on a collagen/hydroxyapatite matrix.

Collagen/hydroxyapatite (HA) composite scaffolds are known to be suitable scaffolds for seeding with mesenchymal stem cells (MSCs) differentiated into osteoblasts and for the in vitro production of artificial bones. However, the optimal collagen/HA ratio remains unclear. Our study confirmed that a higher collagen content increased scaffold stiffness but that a greater stiffness was not sufficient for bone tissue formation, a complex process evidently also dependent on scaffold porosity. We found that the scaffold pore diameter was dependent on the concentration of collagen and HA and that it could play a key role in cell seeding. In conclusion, the optimal scaffold for new bone formation and cell proliferation was found to be a composite scaffold formed from 50 wt % HA in 0.5 wt % collagen I solution.

Collagen/hydroxyapatite scaffold enriched with polycaprolactone nanofibers, thrombocyte-rich solution and mesenchymal stem cells promotes regeneration in large bone defect in vivo

A three-dimensional scaffold of type I collagen and hydroxyapatite enriched with polycaprolactone nanofibers (Coll/HA/PCL), autologous mesenchymal stem cells (MSCs) in osteogenic media, and thrombocyte-rich solution (TRS) was an optimal implant for bone regeneration in vivo in white rabbits. Nanofibers optimized the viscoelastic properties of the Coll/HA scaffold for bone regeneration. MSCs and TRS in the composite scaffold improved bone regeneration. Three types of Coll/HA/PCL scaffold were prepared: an MSC-enriched scaffold, a TRS-enriched scaffold, and a scaffold enriched with both MSCs and TRS. These scaffolds were implanted into femoral condyle defects 6 mm in diameter and 10-mm deep. Untreated defects were used as a control. Macroscopic and histological analyses of the regenerated tissue from all groups were performed 12 weeks after implantation. The highest volume and most uniform distribution of newly formed bone occurred in defects treated with scaffolds enriched with both MSCs and TRS compared with that in defects treated with scaffolds enriched by either component alone. The modulus of elasticity in compressive testing was significantly higher in the Coll/HA/PCL scaffold than those without nanofibers. The composite Coll scaffold functionalized with PCL nanofibers and enriched with MSCs and TRS appears to be a novel treatment for bone defects.

Preparation and modification of collagen-based porous scaffold for tissue engineering

In the effort to generate cartilage tissues using mesenchymal stem cells, porous scaffolds with prescribed biomechanical properties were prepared. Scaffolds with interconnected pores were prepared via lyophilisation of frozen hydrogels made from collagen modified with chitosan nanofibres, hyaluronic acid, copolymers based on poly(ethylene glycol) (PEG), poly(lactic-co-glycolic acid) (PLGA), and itaconic acid (ITA), and hydroxyapatite nanoparticles. The modified collagen compositions were cross-linked using N-(3-dimethylamino propyl)-N′-ethylcarbodiimide hydrochloride (EDC) combined with N-hydroxysuccinimide (NHS) in water solution. Basic physicochemical and mechanical properties were measured and an attempt to relate these properties to the molecular and supermolecular structure of the modified collagen compositions was carried out. Scaffolds containing hydrophilic chitosan nanofibres showed the highest swelling ratio (SR = 20–25) of all the materials investigated, while collagen modified with an amphiphilic PLGA-PEG-PLGA copolymer or functionalised with ITA exhibited the lowest swelling ratio (SR = 5–8). The best resistance to hydrolytic degradation was obtained for hydroxyapatite containing scaffolds. On the other hand, the fastest degradation rate was observed for synthetic copolymer-containing scaffolds. The results showed that the addition of hydroxyapatite or hyaluronic acid to the collagen matrix increases the rigidity in comparison to the collagen-chitosan scaffold. Collagen scaffold modified with hyaluronic acid presented reduced deformation at break while the presence of hydroxypatatite enhanced the scaffold deformation under tensile loading. The tensile elastic modulus of chitosan nanofibre collagen scaffold was the lowest but closest to the articular cartilage; however, the strength and deformation to failure increased up to 200 %.

Collagen-grafted ultra-high molecular weight polyethylene for biomedical applications

A novel material for hard tissue implants has been prepared. The ultra-high molecular weight polyethylene (UHMWPE) was grafted with collagen I, to improve its biocompatibility with soft tissue in case of its usage in bone engineering. Before collagen immobilization, commercial grade UHMWPE was treated with air plasma to introduce hydroperoxides onto the surface and subsequently grafted with carboxylic acid to functionalize the surface. Acrylic acid and itaconic acid were used for surface functionalization. After graft polymerization of carboxylic acids, collagen was immobilized covalently through the amide bonds between residual amino and carboxyl groups in the presence of water-soluble carbodiimide/hydroxysuccinimide cross-linking system. Each step of modification was characterized using spectroscopic (EPR, ATR-FTIR, and XPS), microscopic (SEM and CLSM), and contact angle measurement methods. The experimental results showed that plasma treatment led to a generation of free radicals on the UHMWPE surface resulting in the formation of unstable hydroperoxides. These reactive species were used to graft unsaturated carboxylic acids onto UHMWPE. Consequently, collagen was grafted via the-NH2 and-COOH reaction. The obtained experimental data along with microscopic observations confirmed the success of graft poly-merization of itaconic as well as of acrylic acid and collagen immobilization onto the UHMWPE surface.

Novel electrospun gelatin/oxycellulose nanofibers as a suitable platform for lung disease modeling

Novel hydrolytically stable gelatin nanofibers modified with sodium or calcium salt of oxycellulose were prepared by electrospinning method. The unique inhibitory effect of these nanofibers against Escherichia coli bacteria was examined by luminometric method. Biocompatibility of these gelatin/oxycellulose nanofibers with eukaryotic cells was tested using human lung adenocarcinoma cell line NCI-H441. Cells firmly adhered to nanofiber surface, as determined by scanning electron microscopy, and no signs of cell dying were detected by fluorescent live/dead assay. We propose that the newly developed gelatin/oxycellulose nanofibers could be used as promising scaffold for lung disease modeling and anti-cancer drug testing.

Synthesis of silsesquioxane nanocomposites

In order to investigate the effect of presence of well defined nano-sized inorganic particles on the molecular mobility a conformation statistics of polymer chains, well defined polystyrene (PS) and poly(methyl methacrylate) (PMMA) macromolecules containing polyhedral oligomeric silsesquioxanes nanoparticles (POSS) were synthesized by copper-mediated atom transfer radical polymerization (ATRP). Two approaches were used for the synthesis — the first involves POSS as the initiator of ATRP; the second way considers an addition of POSS to the polymer (prepared by ATRP) with an appropriate functional group. Kinetics of polymerization was determined using common analytical methods and it was compared to the polymerizations initiated by low-molecular weight initiators, regarding the polymerization rate, initiation efficiency and polydispersity of the polymer. Efficiency of the initiation with POSS-containing initiators was low, causing remnants of inseparable free POSS in polymer. The second approach bypassed these disadvantages —POSS is connected to the polymer through a pending allyl group using the very efficient hydrosilylation reaction.

Hydrolytic stability of end-linked hydrogels from PLGA–PEG–PLGA macromonomers terminated by α,ω-itaconyl groups

Biodegradable amphiphilic PLGA–PEG–PLGA triblock copolymers end-terminated with itaconic acid (ITA) having reactive double bonds were synthesized by ring opening polymerization. The prepared α,ω-itaconyl-PLGA–PEG–PLGA telechelic macromonomers were additionally covalently crosslinked under an inert atmosphere by blue light irradiation without the use of a further cross-linker resulting in end-linked polymeric networks. The effects of the ITA amount attached to the α,ω-itaconyl-PLGA–PEG–PLGA copolymers and the crosslinking time on swelling behaviours and hydrolytic stability of the prepared well-defined polymeric network were investigated. Physicochemical properties were characterized by proton and carbon nuclear magnetic resonance spectroscopy (1H NMR, 13C NMR), proton nuclear magnetic resonance relaxometry, attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). It was found that the hydrolytic stability of ITA modified PLGA–PEG–PLGA end-linked hydrogels enhances with both increasing the time of crosslinking and the amount of double bonds attached to α,ω-itaconyl-PLGA–PEG–PLGA polymer chains. In comparison with the original un-crosslinked α,ω-itaconyl-PLGA–PEG–PLGA copolymer, the hydrolytic stability of the end-linked hydrogels significantly increased. Three kinds of water fractions (unbound, weakly and strongly bonded) were determined by proton NMR relaxometry in hydrogels containing 63 mol% of ITA crosslinked for 40 minutes. Even for hydrogels surviving 32 days in water the NMR relaxometry showed structural collapse of the hydrogel probably due to breaking of end-linked nodes followed by hydrolysis faster than water diffusion after day 15 of immersion. End-linked α,ω-itaconyl-PLGA–PEG–PLGA hydrogels can be used in medical, biological or tissue engineering applications.

Biodegradable polyhydroxybutyrate as a polyol for elastomeric polyurethanes

In the proposed work, new elastomeric bio-polyol based polyurethanes (bio-PUs) with specific mechanical properties were prepared by a one-shot process without the presence of a solvent. Commercial non-degradable polyether polyol derived from petrochemical feed stock was partly (in the amount of 1 mass %, 5 mass %, and 10 mass %) substituted by the biodegradable polyhydroxybutyrate (PHB). Morphology of elastomeric PU composites was evaluated by scanning electron microscopy and mechanical properties of the prepared samples were obtained by both tensile measurements and prediction via the Mooney-Rivlin equation. Electron microscopy proved that the prepared materials have the character of a particle filled composite material, where PHB particles are regular with their size of about 1–2 μm in diameter. Tensile measurements demonstrated that the Young’s modulus, tensile stress at break, and tensile strain at break of each sample increase with the increase of the volume fraction of the filler. From the measured stress-strain data, the first and the second term of the Mooney-Rivlin equation were calculated. The obtained constants were applied to recalculate the stress-strain curves. It was found that the Mooney-Rivlin equation corresponds well with the stress-strain behavior of the prepared specimens.

The Effect of Processing of Polycaprolactone Films on Degradation Process Initiated by Aspergillus Oryzae Lipase

Poly(ϵ-caprolactone) (PCL) films with Mn = 18 kDa obtained by compression molding (CM) or solution casting (SC) were subjected to Aspergillus oryzae (AO) lipase action in a phosphate buffer at pH 7 at 37°C. The appearance of randomly oriented cracks on the surface of incubated PCL films accompanied by a decrease of the weight-average molecular weight (Mw) by 10% was observed after 42 days. The increase of crystallinity and surface morphology pattern of PCL samples exposed to AO lipase action supported the fact that the degradation proceeded in the amorphous phase of the aged films. SC films were degraded faster, probably due to better accessibility of ester bonds in the amorphous phase of spherulites.

Rheological properties of functionalised thermosensitive copolymers for injectable applications in medicine

Functionalised triblock copolymers based on poly((lactic acid)-co-(glycolic acid)) and poly(ethylene glycol) (PLGA-PEG-PLGA) further modified with 3-methylenetetrahydrofuran-2,5-dione (itaconic anhydride; ITA) exhibited sol-gel transition induced by increasing temperature. Rheological properties of a series of ITA/PLGA-PEG-PLGA/ITA copolymer concentrations (6–24 mass %) in deionised Milli-Q water were studied by both the test tube inverting method (TTIM) and rheometer. The gel stiffness increased with the polymer concentration shifting the gel point of the copolymer to the lower temperature. The present study demonstrates that each method describes a sol-gel transition, but the combined method gives comprehensive information about changes in colour, viscosity, elastic and loss moduli. Characterisation of such a gel is necessary for its further use, in order to determine whether the material is appropriate as an injectable biomedical hydrogel.