Luiz Pimenta

EDTA Treatment Improves Resin-Dentin Bonds’ Resistance to Degradation

The existence of unprotected collagen fibrils within the hybrid layer compromises the longevity of restorations. This phenomenon may be avoided if solutions other than strong acids are used for dentin demineralization. The hypothesis to be tested is that bond durability may be improved by EDTA demineralization. Dentin surfaces (human and bovine) were bonded: (1) after phosphoric-acid-etching, and after EDTA demineralization with (2) a total-etch adhesive and (3) a self-etching adhesive. After the teeth were sectioned into beams, half of the specimens were immersed in NaOCl, while the other half was immersed in water. Beams were tested to failure in tension. ANOVA and multiple-comparisons tests were used (P < 0.05). No differences in bond strength were found among the 3 bonding procedures, although bonds made to human molars were 43-61% higher than those to bovine incisors. After NaOCl immersion, only specimens subjected to EDTA demineralization maintained the initial bond strength. We conclude that the collagen network is better-preserved after EDTA demineralization.

Clinical evaluation of desensitizing treatments for cervical dentin hypersensitivity.

The aim of this study was to compare different treatments for dentin hypersensitivity in a 6-month follow-up. One hundred and one teeth exhibiting non carious cervical lesions were selected. The assessment method used to quantify sensitivity was the cold air syringe, recorded by the visual analogue scale (VAS), prior to treatment (baseline), immediately after topical treatment, after 1 week, 1, 3 and 6 months. Teeth were randomly assigned to five groups (n = 20): G1: Gluma Desensitizer (GD); G2: Seal& (SP); G3: Oxa-gel (OG); G4: Fluoride (F); G5: Low intensity laser-LILT (660 nm/3.8 J/cm(2)/15 mW). Analysis was based on the non-parametric Kruskal-Wallis test that demonstrated statistical differences immediately after the treatment (p = 0.0165). To observe the individual effects of each treatment, data was submitted to Friedman test. It was observed that GD and SP showed immediate effect after application. Reduction in the pain level throughout the six-month follow-up was also observed. In contrast, LILT presented a gradual reduction of hypersensitivity. OG and F showed effects as of the first and third month respectively. It can be concluded that, after the 6-month clinical evaluation, all therapies showed lower VAS sensitivity values compared with baseline, independently of their different modes of action.

Dentin and enamel bond strengths of dual-cure composite luting agents used with dual-cure dental adhesives §

OBJECTIVE The purpose of this in vitro study was to evaluate and compare dentin and enamel bond strengths obtained with dual-cure composite luting agents when used with dual-cure dental adhesives. METHODS Human molars were ground flat to expose enamel (n=80) or dentin (n=80). Specimens in each substrate group were randomly assigned to eight treatment sub-groups, according to four adhesive-luting agent combinations and two test conditions (with or without thermocycling). Pre-polymerized composite resin posts (TPH Spectrum) were luted to either the enamel or dentin surfaces with one of the following adhesive-luting agent combinations: (1) Xeno IV Dual Cure (dual-cure self-etch adhesive) and Calibra (dual-cure luting agent); (2) Prime & Bond NT Dual Cure (dual-cure total-etch adhesive) and Calibra; (3) OptiBond All-in-One Dual Cure (dual-cure self-etch adhesive) and Nexus 2 Dual Syringe (dual-cure luting agent); (4) OptiBond Solo Plus Dual Cure (dual-cure total-etch adhesive) and Nexus 2 Dual Syringe. For each treatment sub-group, half the specimens (n=10) were tested after 24h storage in water at 37 degrees C, and the other half (n=10) were tested after thermocycling for 1800 cycles between water baths held at 5 and 55 degrees C, with a dwell time in each bath of 30s, and a transfer time of 10s. Bond strengths were measured in shear mode, and expressed in MPa. The fracture mode (adhesive, cohesive, mixed) was examined. Data were analyzed for statistical significance with a factorial ANOVA and post hoc tests. RESULTS Mean enamel bond strengths ranged from 8.4MPa for non-thermocycled OptiBond All-in-One|Nexus 2 to 35.5MPa for non-thermocycled Prime & Bond NT|Calibra. Mean dentin bond strengths ranged from 14.5MPa for non-thermocycled OptiBond Solo Plus|Nexus 2 to 30.9MPa for thermocycled Xeno IV|Calibra. The fracture mode was predominantly adhesive for all groups. CONCLUSIONS On enamel, the total-etch adhesives performed better than their self-etch counterparts, while in dentin, the opposite was found, i.e., the self-etch adhesives performed better than their total-etch counterparts. Thermocycling for 1800 cycles did not affect the SBS of the materials tested to dentin and enamel.

Clinical care in craniofacial microsomia: a review of current management recommendations and opportunities to advance research.

Craniofacial microsomia (CFM) is a complex condition associated with microtia, mandibular hypoplasia, and preauricular tags. It is the second most common congenital facial condition treated in many craniofacial centers and requires longitudinal multidisciplinary patient care. The purpose of this article is to summarize current recommendations for clinical management and discuss opportunities to advance clinical research in CFM.

Effect of finishing instrumentation on the marginal integrity of resin-based composite restorations

PURPOSE This study evaluated the effect of the use of different finishing instruments on the marginal integrity of resin composite restorations. MATERIALS AND METHODS Bovine incisors (N = 75) embedded in epoxy resin had the facial enamel ground and polished to 1200-grit. A standardized cavity (3 x 3 mm, 2 mm deep) was prepared on each specimen and restored with a 2-step total-etch adhesive (Single Bond, 3M ESPE, St. Paul, MN, USA) and a hybrid resin composite (Filtek Z250, 3M ESPE) in a single increment. The restorations were mechanically polished to 1200-grit. Specimens were randomized into different groups (N = 5) according to finishing technique: positive control (1200-grit paper), negative control (regular-grit diamond), fine cross-cut laminated burs, straight-cut laminated burs, spiral-cut laminated burs, and finishing diamonds. The straight-cut burs, spiral-cut burs, and finishing diamonds were tested individually as fine, extra-fine, and ultra-fine, as well as sequentially as a series. A high-speed, water-cooled handpiece under standardized pressure (0.5 N) and time (40 seconds) was used for all finishing procedures. Specimens were processed for scanning electron microscope, and margin gaps were systematically measured. Data were analyzed with one-way analysis of variance and Duncan test. RESULTS The negative control specimens (course diamond) presented the largest gaps, whereas the positive control specimens (mechanically polished) generated the smallest gaps. No statistically significant difference was noted between the finishing diamonds and the positive control. The negative control exhibited significantly larger gaps when compared with the other finishing instruments. Intermediate results were observed for cross-cut, straight-cut, and spiral-cut laminated burs. Fine, extra-fine and ultra-fine finishing diamonds generated smaller gaps compared with laminated burs, but the differences were not always statistically significant. CONCLUSION Fine, extra-fine and ultra-fine finishing diamonds used to finish composite restorations generated better marginal integrity when compared with carbides and regular-grit diamonds. CLINICAL SIGNIFICANCE When finishing composite restorations, finishing diamond burs result in better composite margins than carbide laminated burs.

Photographic protocol for image acquisition in craniofacial microsomia

Craniofacial microsomia (CFM) is a congenital condition associated with orbital, mandibular, ear, nerve, and soft tissue anomalies. We present a standardized, two-dimensional, digital photographic protocol designed to capture the common craniofacial features associated with CFM.

Issues involved in the phenotypic classification of orofacial clefts ascertained through a state birth defects registry for the north carolina cleft outcomes study

BACKGROUND Epidemiologic studies involving birth defects are extremely sensitive to phenotype accuracy and precision. We devised a case review and classification protocol for a project to study school achievement in children with idiopathic, nonsyndromic orofacial clefts to improve the reliability of phenotypic classification from the statewide birth defects registry. METHODS Surveillance-program abstraction data and medical records at the birth or treating hospitals were used when available. Exclusion criteria included: median cleft lip; Tessier cleft; premaxillary agenesis; presence of a recognizable syndrome, phenotype, association, or sequence (other than Robin sequence); clefts with other malformations not considered to be normal or common variants in the newborn; and cases with documented or suspected genetic or teratogenic causes. RESULTS Of 712 children identified with orofacial clefts, 153 were excluded, leaving 559 nonsyndromic orofacial cleft cases of unknown cause in the final study. These cases were grouped into the following clinically meaningful types: cleft lip with or without cleft alveolus; cleft lip and cleft palate; and cleft palate only. This review and classification process resulted in the elimination of 21.5% of the original cohort of identified cases, with most exclusions being due to suspected syndromic associations. CONCLUSION Verbatim descriptions of the clinical findings are critical for accurate classification of diagnoses. This review process improved the precision of orofacial cleft phenotype classification for our study. Precision would have been further improved if all of the cases had verbatim descriptions of diagnoses and all medical records could have been reviewed by the classification team.

3D of brain shape and volume after cranial vault remodeling surgery for craniosynostosis correction in infants

The skull of young children is made up of bony plates that enable growth. Craniosynostosis is a birth defect that causes one or more sutures on an infant’s skull to close prematurely. Corrective surgery focuses on cranial and orbital rim shaping to return the skull to a more normal shape. Functional problems caused by craniosynostosis such as speech and motor delay can improve after surgical correction, but a post-surgical analysis of brain development in comparison with age-matched healthy controls is necessary to assess surgical outcome. Full brain segmentations obtained from pre- and post-operative computed tomography (CT) scans of 8 patients with single suture sagittal (n=5) and metopic (n=3), nonsyndromic craniosynostosis from 41 to 452 days-of-age were included in this study. Age-matched controls obtained via 4D acceleration-based regression of a cohort of 402 full brain segmentations from healthy controls magnetic resonance images (MRI) were also used for comparison (ages 38 to 825 days). 3D point-based models of patient and control cohorts were obtained using SPHARM-PDM shape analysis tool. From a full dataset of regressed shapes, 240 healthy regressed shapes between 30 and 588 days-of-age (time step = 2.34 days) were selected. Volumes and shape metrics were obtained for craniosynostosis and healthy age-matched subjects. Volumes and shape metrics in single suture craniosynostosis patients were larger than age-matched controls for pre- and post-surgery. The use of 3D shape and volumetric measurements show that brain growth is not normal in patients with single suture craniosynostosis.

Difference in maxillary sinus volumes of patients with cleft lip and palate

BACKGROUND AND OBJECTIVE Sinus disease is noted to be common in patients with cleft lip and palate. Many have wondered if anatomic differences are a cause or at least a contributor of this. In this sense, comparisons of sinus volumes of patients with different craniofacial clefts may be helpful to determine possible differences from normal. Thus, the present study aimed to evaluate and compare the maxillary sinus volume of patients with unilateral (UCLP) and bilateral (BCLP) cleft lip and palate to control, i.e. non-cleft patients, using cone beam computed tomography (CBCT) images. METHODS The sample consisted of 30 subjects with UCLP, 15 with BCLP and 15 control individuals (non-cleft). Each maxillary sinus was assessed three-dimensionally, segmented and its volume was calculated. The comparison between right and left sinus was performed by Student t-test, and the differences between the control and cleft groups were calculated using ANOVA. RESULTS No statistical differences were found when the sides were compared (p>0.05). In relation to the assessment among groups, all comparisons had statistically significant differences (p<0.05), with the UCLP group presenting the lowest sinus volume. CONCLUSION UCLP individuals present maxillary sinuses with smaller volumes, without differences found between the cleft and non-cleft side. BCLP subjects also present a reduction in the volume when compared to a control sample, but the average sinus volume is larger than in UCLP patients.

GAND classification and volumetric assessment of unilateral cleft lip and palate malformations using cone beam computed tomography

The aim of this study was to propose a classification for unilateral cleft lip and palate (UCLP) malformations based on cone beam computed tomography (CBCT) images, as well as to estimate the amount of bone necessary for grafting, and to evaluate the relationship of this volume with scores obtained using the classification. CBCT images of 33 subjects with UCLP were evaluated according to gap, arch, nasal, and dental parameters (GAND classification). Additionally, these defects were segmented and the amount of graft needed for alveolar bone grafting was estimated. The reproducibility of GAND classification was analyzed by weighted kappa test. The association of volume assessment with the classification (gap and nasal parameters) was verified using analysis of variance, while the intra-observer agreement was analyzed using the intra-class correlation coefficient. The intra-observer reproducibility of the classification ranged from 0.29 to 0.92 and the inter-observer agreement ranged from 0.29 to 0.91. There were no statistically significant values when evaluating the association of the volume with the classification (P>0.05). The GAND classification is a novel system that allows the quick estimation of the extent and complexity of the cleft. It is not possible to estimate the amount of bone needed for alveolar bone grafting based on the classification; individualized surgical planning should be done for each patient specifically.