Lukasz Sojka

Low loss Ge-As-Se chalcogenide glass fiber, fabricated using extruded preform, for mid-infrared photonics

Chalcogenide glass fibers have attractive properties (e.g. wide transparent window, high optical non-linearity) and numerous potential applications in the mid-infrared (MIR) region. Low optical loss is desired and important in the development of these fibers. Ge-As-Se glass has a large glass-forming range to provide versatility of choice from continuously varying physical properties. Recently, broadband MIR supercontinuum generation has been achieved in chalcogenide fibers by using Ge-As-Se glass in the core/clad. structure. In the shaping of chalcogenide glass optical fiber preforms, extrusion is a useful technique. This work reports glass properties (viscosity-temperature curve and glass transition) and optical losses of Ge-As-Se fiber fabricated from an extruded preform. A robust cut-back method of fiber loss measurement is developed and the corresponding error calculation discussed. MIR light is propagated through 52 meters of a fiber, which has the lowest loss yet reported for Ge-As-Se fiber of 83 ± 2 dB/km at 6.60 μm wavelength. The fiber baseline loss is 83-90 dB/km across 5.6-6.8 μm, a Se-H impurity absorption band of 1.4 dB/m at 4.5 μm wavelength is superposed and other impurity bands (e.g. O-H, As-O, Ge-O) are ≤ 20 dB/km. Optical losses of fiber fabricated from different positions of the extruded preform are investigated.

Refractive index dispersion of chalcogenide glasses for ultra-high numerical-aperture fiber for mid-infrared supercontinuum generation

We select a chalcogenide core glass, AsSe, and cladding glass, GeAsSe, for their disparate refractive indices yet sufficient thermal-compatibility for fabricating step index fiber (SIF) for mid-infrared supercontinuum generation (MIR-SCG). The refractive index dispersion of both bulk glasses is measured over the 0.4 µm–33 µm wavelength-range, probing the electronic and vibrational behavior of these glasses. We verify that a two-term Sellmeier model is unique and sufficient to describe the refractive index dispersion over the wavelength range for which the experimentally determined extinction coefficient is insignificant. A SIF composed of the glasses is fabricated and calculated to exhibit an ultra-high numerical aperture >0.97 over the entire wavelength range 0.4-33 µm suggesting that the SIF glass pair is a promising candidate for MIR-SCG. Material dispersion characteristics and the zero dispersion wavelength, both critical design parameters for SIF for MIR-SCG, are derived.

Mid-infrared photoluminescence in small-core fiber of praseodymium-ion doped selenide-based chalcogenide glass

Rare earth (RE)-ion doped chalcogenide glasses are attractive for mid-infrared (MIR) fiber lasers for operation >4 μm. Our prior modeling suggests that praseodymium (Pr) is a suitable RE-ion dopant for realizing a selenide-based, chalcogenide-glass, step index fiber (SIF) MIR fiber laser operating at 4-5 μm wavelength. Fabrication of RE-ion doped chalcogenide glass fiber, especially with a small core, is a demanding process because crystallization must be avoided during the heat treatments required to effect shaping. Here, a 500 ppmw (parts per million parts, by weight) Pr3+-doped Ge-As-Ga-Se glass SIF with a 10 μm or 15 μm diameter core is reported; the cladding glass is Ge-As-Ga-Se-S. The multistage process to produce the fiber is outlined. Thermal and optical properties of the core/clad. glass pair, and the crystalline/amorphous nature and optical behavior of the small core fiber are reported. MIR photoluminescence and lifetime of a RE-ion doped chalcogenide glass small core fiber are reported for the first time.

Superior photoluminescence (PL) of Pr 3+ -In, compared to Pr 3+ -Ga, selenide-chalcogenide bulk glasses and PL of optically-clad fiber

The photoluminescent-(PL)-properties of Pr³⁺-ions in indium-containing selenide-chalcogenide bulk-glasses are found to be superior when compared with gallium-containing analogues. We observe circa doubling of mid-infrared (MIR) PL intensity from 3.5 to 6 μm for bulk glasses, pumped at 1.55 μm wavelength, and an increased excited state lifetime at 4.7 μm. PL is reported in optically-clad fiber. Ga addition is well known to enhance RE³⁺ solubility and PL behavior, and is believed to form ([RE³⁺]-Se-[Ga(III)]) in the glasses. Indium has the same outer electronic-structure as gallium for solvating the RE-ions. Moreover, indium is heavier and promotes lower phonon energy locally around the RE-ion, thereby enhancing the RE-ion PL behavior, as observed here.

Mid-infrared emission in Tb 3+ -doped selenide glass fiber

The mid-infrared (MIR) emission behavior of Tb3+-doped Ge–As–Ga–Se bulk glasses (500, 1000, and 1500 ppmw Tb3+) and unstructured fiber (500 ppmw Tb3+) is investigated when pumping at 2.013 μm. A broad emission band is observed at 4.3–6.0 μm corresponding to F57→F67, with an observed emission lifetime of 12.9 ms at 4.7 μm. The F47 level is depopulated nonradiatively and so it is proposed that Tb3+-doped Ge–As–Ga–Se fiber may operate as a quasi-three-level MIR fiber laser. Underlying glass-impurity vibrational absorption bands are numerically removed to give the true Tb3+ absorption cross section, as required for Judd–Ofelt (J–O) analysis. Radiative transition rates calculated from J–O theory are compared with measured lifetimes. A numerical model of the three-level Tb3+-doped fiber laser is developed for Tb3+ doping of 8.25×1024  ions m−3 (i.e., 500 ppmw) and dependence of laser performance on fiber length, output coupler reflectivity, pump wavelength, signal wavelength, and fiber background loss is calculated. Results indicate the feasibility of an efficient three-level MIR fiber laser operating within 4.5–5.3 μm, pumped at either 2.013 or 2.95 μm.

Towards mid-infrared fiber-lasers: rare earth ion doped, indium-containing, selenide bulk glasses and fiber

Chalcogenide glasses are promising materials for mid-infrared (IR) fiber lasers (i.e. 3 - 25 μm wavelength range). These glasses exhibit low phonon energies, together with large refractive indices, rare earth (RE-) ion solubility and sufficient mechanical and chemical robustness. Optical quality of the fiber is key. Gallium is known to promote RE-ion solubility in chalcogenide glasses, probably forming a [Pr(III)] - Se - [Ga(III)] associated type complex. Here, indium is investigated as an alternative additive to gallium in Pr3+-doped Ge-As-Se chalcogenide glasses. Indium has the same outer electronic structure as gallium. Moreover, indium has the advantage of being heavier than gallium, potentially promoting a lower phonon-energy, local environment of the RE-dopant. Zero to ~2000 ppmw (nominal parts per million by weight) Pr3+- doped Ge-As-In-Se bulk glasses are prepared using the melt-quench method. ~500 ppmw Pr3+- doped Ge-As-In-Se, optically-clad fiber is realized via fiber-drawing of extruded fiberoptic preforms. Fiber absorption and emission spectra are collected and compared with those of the bulk glasses.

Modelling of chalcogenide glass fibre lasers for MIR generation

The presentation gives an account of recent developments in the modelling of chalcogenide glass based lanthanide doped fibre lasers for the mid-infra-red (MIR) wavelength range. The particular lanthanide elements considered include dysprosium, praseodymium and terbium. Both classical 3 level lasing systems and cascade lasing systems are considered, and their properties compared. Steady state and pulsed operation of the lasers is considered and the possible application as a seed pump for supercontinuum generation is discussed. Several aspects of numerical methods used specifically for the modelling of MIR fibre lasers are also considered.

True mid-infrared Pr 3+ absorption cross-section in a selenide-chalcogenide host-glass

The mid-infrared (MIR) spans the 3 - 25 μm wavelength range. Rare-earth-ion doped selenide-chalcogenide glasses are being developed for direct-emission MIR fibre lasers. The true Pr³⁺ absorption cross-section in the 3.5 - 6 μm wavelength region of a Pr³⁺-doped (500 ppmw of Pr³⁺ i.e. 9.47×1019 Pr³⁺ ions cm^-3) GeAsGaSe host-glass is presented, after numerically removing the underlying, extrinsic vibrational absorption due to [H-Se-] contamination of the host-glass.

Towards the mid-infrared optical biopsy

We are establishing a new paradigm in mid-infrared molecular sensing, mapping and imaging to open up the midinfrared spectral region for in vivo (i.e. in person) medical diagnostics and surgery. Thus, we are working towards the mid-infrared optical biopsy (‘opsy’ look at, bio the biology) in situ in the body for real-time diagnosis. This new paradigm will be enabled through focused development of devices and systems which are robust, functionally designed, safe, compact and cost effective and are based on active and passive mid-infrared optical fibers. In particular, this will enable early diagnosis of external cancers, mid-infrared detection of cancer-margins during external surgery for precise removal of diseased tissue, in one go during the surgery, and mid-infrared endoscopy for early diagnosis of internal cancers and their precision removal. The mid-infrared spectral region has previously lacked portable, bright sources. We set a record in demonstrating extreme broad-band supercontinuum generated light 1.4 to 13.3 microns in a specially engineered, high numerical aperture mid-infrared optical fiber. The active mid-infrared fiber broadband supercontinuum for the first time offers the possibility of a bright mid-infrared wideband source in a portable package as a first step for medical fiber-based systems operating in the mid-infrared. Moreover, mid-infrared molecular mapping and imaging is potentially a disruptive technology to give improved monitoring of the environment, energy efficiency, security, agriculture and in manufacturing and chemical processing. This work is in part supported by the European Commission: Framework Seven (FP7) Large-Scale Integrated Project MINERVA: MId-to-NEaR- infrared spectroscopy for improVed medical diAgnostics (317803; www.minerva-project.eu).

A study of MIR photoluminescence from Pr3+ doped chalcogenide fibers pumped at near-infrared wavelengths

We perform a numerical analysis of mid-infrared photoluminescence emitted by praseodymium (III) doped chalcogenide selenide glass pumped at near-infrared wavelengths. The results obtained show that an effective inversion of level populations can be achieved using both 1480 nm and 1595 nm laser diodes. The rate of the spontaneous emission achieved when pumping at 1480 nm and 1595 nm is comparable to this achieved using the standard pumping wavelength of 2040 nm.