Lulu Fan

Fabrication of novel magnetic chitosan grafted with graphene oxide to enhance adsorption properties for methyl blue

A novel magnetic composite bioadsorbent composed of magnetic chitosan and graphene oxide (MCGO) was prepared as the magnetic adsorbent. The morphology, chemical structure and magnetic property of the MCGO were characterized by Fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD) and Scanning electronic microscope (SEM), respectively. Adsorption of methyl blue (MB) onto MCGO was investigated with respect to pH, adsorption time, initial MB concentration and temperature. Kinetics data and adsorption isotherm, obtained at the optimum pH 5.3, were better fitted by pseudo-second-order kinetic model and by Langmuir isotherm, respectively. The values of activation parameters such as free energy (ΔG, -0.74∼-1.46kJmol(-1)), enthalpy (ΔH, -10.28kJmol(-1)) and entropy (ΔS, -36.35Jmol(-1)K(-1)) were determined, respectively, indicating that the adsorption was spontaneous, favorable and exothermic process in nature. Moreover, the MCGO was stable and easily recovered, the adsorption capacity was about 90% of the initial saturation adsorption capacity after being used four times.

Highly selective adsorption of lead ions by water-dispersible magnetic chitosan/graphene oxide composites

Magnetic chitosan/graphene oxide (MCGO) materials were fabricated through a facile and fast process and their application as excellent adsorbents for metal ions was also demonstrated. The characteristics results of FTIR, SEM, TEM, VSM and XRD showed that MCGO was successfully prepared. The SEM and TEM revealed that magnetic chitosan had been assembled on the surface of graphene oxide layers with a high density. The XRD and VSM indicated the MCGO had enough magnetic response to meet the need of magnetic separation. The magnetic chitosan grafted with graphene oxide sheets showed an increased surface area. The MCGO was used as sorbents for the removal of Pb(II) ions from large volumes of aqueous solutions. The effects of pH, contact time, and concentration on Pb(II) ions sorption were investigated. The results indicated that Pb(II) ions sorption on MCGO was strongly dependent on pH. The abundant functional groups on the surfaces of MCGO played an important role on Pb(II) sorption. Equilibrium studies showed that the data of Pb(II) adsorption followed the Langmuir model. The maximum adsorption capacity for Pb(II) was estimated to be 76.94 mg/g. The MCGO was stable and easily recovered.

Adsorbent for chromium removal based on graphene oxide functionalized with magnetic cyclodextrin-chitosan

A simple chemical bonding method to synthesize magnetic cyclodextrin-chitosan/graphene oxide (CCGO) was reported. The adsorption behaviors of Cr(VI) in aqueous solution on CCGO were systematically investigated. As the results shown that, with the advantage of high surface area, abundant hydroxyl and amino groups of CCGO, and the magnetic property of Fe3O4, the Cr(VI) can be easily and rapidly extracted from the water by magnetic attraction under investigation. The adsorption equilibrium of CCGO for Cr(VI) corresponded with Langmuir isotherm, and the novel adsorbent exhibited better Cr(VI) removal efficiency in solutions with low pH. It was found that the Cr(VI) adsorption performance of CCGO strongly depends on their surface charge concentration and specific surface area. These results provide evidences for estimating and optimizing the removal of metal ions from the wastewater by using of CCGO composites in the future.

Preparation of novel magnetic chitosan/graphene oxide composite as effective adsorbents toward methylene blue.

A novel magnetic composite bioadsorbent composed of magnetic chitosan and graphene oxide (MCGO) was prepared as the magnetic adsorbent toward methylene blue. The magnetic composite bioadsorbent was characterized by SEM, FTIR and XRD measurements. The effect factors including pH, contact time and temperature on the adsorption properties of methylene blue onto MCGO were investigated. The resulting shows extraordinary adsorption capacity and fast adsorption rates for removal of methylene blue. The kinetics are well-described by pseudo-second-order kinetic. The experimental data of isotherm followed the Langmuir isotherm model and the Freundlich model, respectively. This work shows that the MCGO could be utilized as an efficient, magnetically separable adsorbent for the environmental cleanup.

Synthesis of magnetic β-cyclodextrin-chitosan/graphene oxide as nanoadsorbent and its application in dye adsorption and removal.

Magnetic β-cyclodextrin-chitosan/graphene oxide materials (MCCG) were fabricated through a facile chemical route and their application as excellent adsorbents for dye removal were also demonstrated. The characteristics results of FTIR, SEM, TEM and XRD showed that MCCG was successfully prepared. The results showed that, benefiting from the surface property of graphene oxide, hydrophobicity of β-cyclodextrin, the abundant amino and hydroxyl functional groups of chitosan, and from the magnetic property of Fe(3)O(4), the adsorbent possesses quite a good and versatile adsorption capacity to the dye under investigation, and can be easily and rapidly extracted from water by magnetic attraction. Most importantly, the adsorbent can be easily and efficiently regenerated for reuse with hardly any compromise of the adsorption capacity. The adsorption kinetics, isotherms and thermodynamics were investigated to indicate that the kinetics and equilibrium adsorptions were well-described by pseudo-second-order kinetic and Langmuir isotherm model, respectively. The thermodynamic parameters suggested that the adsorption process was spontaneous and endothermic in nature. The inherent advantages of the nano-structured adsorbent, such as adsorption capacity, easy, handy operation, rapid extraction, and regeneration, may pave a new, efficient and sustainable way towards highly-efficient dye pollutant removal in water and wastewater treatment.

Synthesis of graphene oxide decorated with magnetic cyclodextrin for fast chromium removal

A simple route is presented for the fabrication of a magnetic β-cyclodextrin/graphene oxide nanocomposite (MCGN). The characteristic results of FTIR, SEM, TEM, VSM and XRD showed that MCGN was prepared. The large saturation magnetization (50.13 emu g−1) of the synthesized nanoparticles allows fast separation of the MCGN from liquid suspension. The MCGN demonstrates extremely fast Cr-removal from wastewater with a high removal efficiency within 60 min. The adsorption kinetic data were best described by a pseudo-second-order model. The Cr-removal capability is more than 120 mg g−1, which is much higher than the previously reported values of other nanomaterials, as Cr-removal adsorbents. The MCGN was stable and easily recovered. The adsorption isotherms were investigated, and indicate that the equilibrium adsorptions are well-described by the Langmuir isotherm mode. The MCGN could be a good candidate for efficient Cr-removal from wastewater and for the deep-purification of polluted water.

Removal of Ag+ from water environment using a novel magnetic thiourea-chitosan imprinted Ag+.

A novel, thiourea-chitosan coating on the surface of magnetite (Fe(3)O(4)) (Ag-TCM) was successfully synthesized using Ag(I) as imprinted ions for adsorption and removal of Ag(I) ions from aqueous solutions. The thermal stability, chemical structure and magnetic property of the Ag-TCM were characterized by the scanning electron microscope (SEM), Fourier transform infrared spectrometer (FT-IR) and vibrating sample magnetometer (VSM), respectively. Batch adsorption experiments were performed to evaluate the adsorption conditions, selectivity and reusability. The results showed that the maximum adsorption capacity was 4.93 mmol/g, observed at pH 5 and temperature 30°C. Equilibrium adsorption was achieved within 50 min. The kinetic data, obtained at the optimum pH 5, could be fitted with a pseudo-second order equation. Adsorption process could be well described by Langmuir adsorption isotherms and the maximum adsorption capacity calculated from Langmuir equation was 5.29 mmol/g. The selectivity coefficient of Ag(I) ions and other metal cations onto Ag-TCM indicated an overall preference for Ag(I) ions, which was much higher than non-imprinted thiourea-chitosan beads. Moreover, the sorbent was stable and easily recovered, the adsorption capacity was about 90% of the initial saturation adsorption capacity after being used five times.

Synthesis and characterization of magnetic β-cyclodextrin–chitosan nanoparticles as nano-adsorbents for removal of methyl blue

A novel nano-adsorbent, β-cyclodextrin-chitosan (CDC) modified Fe(3)O(4) nanoparticles (CDCM) is fabricated for removal of methyl blue (MB) from aqueous solution by grafting CDC onto the magnetite surface. The characteristics results of FTIR, SEM and XRD show that CDC is grafted onto Fe(3)O(4) nanoparticles. The grafted CDC on the Fe(3)O(4) nanoparticles contributes to an enhancement of the adsorption capacity because of the strong abilities of CDCM, which includes the multiple hydroxyl, carboxyl groups, amino groups and the formation of an inclusion complex due to the β-CD molecules through host-guest interactions, to adsorb MB. The adsorption of MB onto CDCM is found to be dependent on pH and temperature. Adsorption equilibrium is achieved in 50 min and the adsorption kinetics of MB is found to follow a pseudo-second-order kinetic model. Equilibrium data for MB adsorption are fitted well by Langmuir isotherm model. The maximum adsorption capacity for MB is estimated to be 2.78 g/g at 30°C. The CDCM was stable and easily recovered. Moreover the adsorption capacity was about 90% of the initial saturation adsorption capacity after being used four times.

Removal of alizarin red from water environment using magnetic chitosan with Alizarin Red as imprinted molecules

A novel, chitosan coating on the surface of magnetite (Fe(3)O(4)) (MIMC) was successfully synthesized using alizarin red (AR) as a template for adsorption and removal of AR from aqueous solutions. Characterization of the obtained MIMC was achieved by FTIR spectra, SEM micrographs and XRD. Batch adsorption experiments were performed to investigate the adsorption conditions, selectivity and reusability. The results showed that the maximum adsorption capacity was 40.12 mg/g, observed at pH 3 and temperature 30°C. Equilibrium adsorption was achieved within 50 min. The kinetic data, obtained at the optimum pH 3, could be fitted with a pseudo-second-order equation. Adsorption process could be well described by Langmuir adsorption isotherms and the maximum adsorption capacity was calculated as 43.08 mg/g. The selectivity coefficient of AR and other dyes onto MIMC indicated an overall preference for AR, which was much higher than non-imprinted magnetic chitosan beads. Moreover, the sorbent represented high stability and good repeatability.

Flow injection chemiluminescence sensor based on core-shell magnetic molecularly imprinted nanoparticles for determination of sulfadiazine.

A novel flow injection chemiluminescence (FI-CL) sensor for determination of sulfadiazine (SDZ) using core-shell magnetic molecularly imprinted polymers (MMIPs) as recognition element is developed. Briefly, a hydrophilic MMIPs layer was produced at the surface of Fe(3)O(4)@SiO(2) magnetic nanoparticles (MNPs) via combination of molecular imprinting and reversible stimuli responsive hydrogel. And it provided the MMIPs with excellent adsorption capacity and rapid adsorption rate due to the imprinted sites mostly situated on the surface of MMIPs. Then the prepared SDZ-MMIPs were packed into flow cell to establish a novel FI-CL sensor. The sensor provided a wide linear range for SDZ of 4.0×10(-7) to 1.0×10(-4) mol L(-1) with a detection limit of 1.54×10(-7) mol L(-1). And the relative standard deviation (RSD) for the determination of 1.0×10(-6) mol L(-1) SDZ was 2.56% (n=11). The proposed method was applied to determine SDZ in urine samples and satisfactory results were obtained.