Lydia Braun

Preparation of actuating fibres of oriented main-chain liquid crystalline elastomers by a wetspinning process

We present a versatile method to prepare oriented fibres with a defined thickness from main-chain liquid crystalline elastomers. A microfluidic setup is utilized to inject a solution of a photocrosslinkable smectic A main-chain polymer into a co-flowing stream of silicone oil. Diffusion of the solvent into the oil yields solid polymer filaments that are crosslinked in a continuous way by UV-irradiation. The obtained fibres are highly oriented and show a reversible and significant contraction during the liquid crystals phase transition.

Degradable Cationic Nanohydrogel Particles for Stimuli‐Responsive Release of siRNA

Well-defined nanogels have become quite attractive as safe and stable carriers for siRNA delivery. However, to avoid nanoparticle accumulation, they need to provide a stimuli-responsive degradation mechanism that can be activated at the payloads site of action. In this work, the synthetic concept for generating well-defined nanohydrogel particles is extended to incorporate disulfide cross-linkers into a cationic nanonetwork for redox-triggered release of oligonucleotide payload as well as nanoparticle degradation under reductive conditions of the cytoplasm. Therefore, a novel disulfide-modified spermine cross-linker is designed that both allows disassembly of the nanogel as well as removal of cationic charge from residual polymer fragments. The degradation process is monitored by scanning electron microscopy (SEM) and fluorescence correlation spectroscopy (FCS). Moreover, siRNA release is analyzed by agarose gel electrophoresis and a fluorescent RNA detection assay. The results exemplify the versatility of the applied nanogel manufacturing process, which allows alternative stimuli-responsive core cross-linkers to be integrated for triggered oligonucleotide release as well as effective biodegradation for reduced nanotoxicity.

Side-chain conjugated polymers for use in the active layers of hybrid semiconducting polymer/quantum dot light emitting diodes

Three monomers, M1–M3, with modified carbazole cores and styrene functionality were prepared for use in the active layers of hybrid polymer/quantum dot light emitting diodes. Utilizing reversible addition fragmentation chain transfer polymerization, side-chain conjugated polymers, P1–P3, with narrow polydispersities and disulfide end groups were obtained. The thermal, optical, and electrochemical properties of the polymers varied depending on the substituents of the carbazole cores. Through the disulfide end groups the polymers were chemically blended with quantum dots to obtain QD/polymer hybrids, which were further used as active layers in light emitting diodes. The fabricated devices retained the superior electroluminescence properties of QDs and showed good device performance with a highest external quantum efficiency of 6.09%. Moreover, a correlation between the HOMO level of the polymer and device performance was identified.

Differences between smectic homo- and co-polysiloxanes as a consequence of microphase separation

This paper compares smectic phases formed from LC‐homo‐ and LC‐co‐polysiloxanes. In the homopolysiloxane, each repeating unit of the polymer chain is substituted with a mesogen, whereas in the copolysiloxanes mesogenic repeating units are separated by dimethylsiloxane units. Despite a rather similiar phase sequence of the homo‐ and co‐polysiloxanes—higher ordered smectic, smectic C* (SmC*), smectic A (SmA) and isotropic—the nature of their phases differs strongly. For the copolymers the phase transition SmC* to SmA is second order and of the ‘de Vries’ type with a very small thickness change of the smectic layers. Inside the SmA phase, however, the smectic thickness decreases strongly on approaching the isotropic phase. For the homopolymer the phase transition SmC* to SmA is first order with a significant thickness change, indicating that this phase is not of the ‘de Vries’ type. This difference in the nature of the smectic phases is probably a consequence of microphase separation in the copolymer, which facilitates a loss of the tilt angle correlation between different smectic layers. This has consequences for the mechanical properties of LC‐elastomers formed from homo‐ and co‐polymers. For the elastomers from homopolymers the smectic layer compression seems to be rather high, while it seems to be rather small for the copolymers.

Secondary-Structure-Driven Self-Assembly of Reactive Polypept(o)ides: Controlling Size, Shape, and Function of Core Cross-Linked Nanostructures

Achieving precise control over the morphology and function of polymeric nanostructures during self-assembly remains a challenge in materials as well as biomedical science, especially when independent control over particle properties is desired. Herein, we report on nanostructures derived from amphiphilic block copolypept(o)ides by secondary-structure-directed self-assembly, presenting a strategy to adjust core polarity and function separately from particle preparation in a bioreversible manner. The peptide-inherent process of secondary-structure formation allows for the synthesis of spherical and worm-like core-cross-linked architectures from the same block copolymer, introducing a simple yet powerful approach to versatile peptide-based core-shell nanostructures.

Functionalization of P3HT with Various Mono- and Multidentate Anchor Groups

Due to its favorable optoelectronic properties and the accessibility via Grignard metathesis (GRIM) polymerization, poly(3-hexylthiophene) (P3HT) is one of the most applied conjugated polymers. The ‘living’ nature of GRIM polymerization enables the modification of the polymer and the installation of desired properties. In the present study, two versatile approaches for the synthesis of anchor group-modified P3HT have been developed, which enable the functionalization of various inorganic nanoparticles. Depending on the polymerization conditions, monoand bifunctional ethynyl-terminated P3HT or solely monofunctionalized aldehyde-terminated P3HT was synthesized. Afterwards, the quantitative introduction of amine, monoand multidentate disulfide and catechol anchor groups was performed by copper-catalyzed 1,3-dipolar cycloaddition or via imine formation reactions. The influence of the polymeric ligand structure on the functionalization of nanoparticles was then investigated for CdSe@ZnS quantum dots and TiO2 nanorods by transmission electron microscopy (TEM) and infrared (IR) spectroscopy.