M. Ashfaq Ahmad

Effect of Alkali Carbonates (Single, Binary, and Ternary) on Doped Ceria: A Composite Electrolyte for Low-Temperature Solid Oxide Fuel Cells

Samarium-doped ceria (SDC) carbonate has become an attractive electrolyte for fuel cells because of its remarkable ion conductivity and high performance. Different doped ceria-carbonate (single-carbonate SDC, binary-carbonate SDC, and ternary-carbonate SDC) electrolytes were synthesized by the coprecipitation/oxalate method, to optimize the electrochemical performance. The structure; morphology; and thermal, optical, and surface properties have been studied using a variety of techniques. The X-ray diffraction results confirmed the successful incorporation of samarium into ceria as a crystalline structure and inclusion of carbonate, which is amorphous in nature. To analyze the conduction mechanism, direct current conductivity was measured in a H2/O2 atmosphere. Doped ceria-binary carbonate ((Li/Na)CO3-SDC) showed the best conductivity of 0.31 S cm-1 and power density of 617 mW cm-2, at 600 °C. The enhancement in the ionic conductivity and performance of the composites is due to the contribution of hybrid ions (O2-, H+). The crystallite size of the composites was in the range 21-41 nm. For the calculation of band gaps, optical absorption spectra of the synthesized powders were analyzed, and they showed a red shift with the band gap energy in the range 2.6-3.01 eV, when compared to that of pure ceria (3.20 eV).

Novel vinyl-modified sepiolite-based polymer nanocomposites: synthesis and characterization

An environmental-friendly synthesis of polymer clay nanocomposites (PCNs) was carried out by incorporation of nanoclay into polymer matrix for their potential application as sorbent of metals present in aqueous media. Polyacrylonitrile was chemically grafted onto 77% vinyl triethoxysilane-modified sepiolite. The polymerization was carried out with benzoyl peroxide (BPO, C14H10O4) initiator in three different weight ratios of 1.0, 2.0, and 3.0%. The maximum polymer grafting of about 83% was obtained in nanocomposite initiated by 2.0% ratio of BPO. The surface modification of nanocomposites was carried out using hydroxyl amine hydrochloride (NH2OH·HCl). The prepared nanocomposites were characterized by Fourier transform infrared spectroscopy, X-ray diffractometry, thermogravimetric analysis, and Brunauer–Emmett–Teller technique. The copper removal tendency of nanocomposites was studied by atomic absorption spectroscopy. The maximum adsorption of copper was 86%, which could be achieved by nanocomposites synthesized with 2% initiator. The results have revealed the practical potential of the prepared PCN as efficient adsorbents.

Electrochemical investigation of mixed metal oxide nanocomposite electrode for low temperature solid oxide fuel cell

Zinc-based nanostructured nickel (Ni) free metal oxide electrode material Zn0.60/Cu0.20Mn0.20 oxide (CMZO) was synthesized by solid state reaction and investigated for low temperature solid oxide fuel cell (LTSOFC) applications. The crystal structure and surface morphology of the synthesized electrode material were examined by XRD and SEM techniques respectively. The particle size of ZnO phase estimated by Scherer’s equation was 31.50 nm. The maximum electrical conductivity was found to be 12.567 S/cm and 5.846 S/cm in hydrogen and air atmosphere, respectively at 600∘C. The activation energy of the CMZO material was also calculated from the DC conductivity data using Arrhenius plots and it was found to be 0.060 and 0.075 eV in hydrogen and air atmosphere, respectively. The CMZO electrode-based fuel cell was tested using carbonated samarium doped ceria composite (NSDC) electrolyte. The three layers 13 mm in diameter and 1 mm thickness of the symmetric fuel cell were fabricated by dry pressing. The maximum power density of 728.86 mW/cm2 was measured at 550∘C.

SYNTHESIS, CHARACTERISTICS AND APPLICATIONS OF ZnO NANOWIRES IN DYE-SENSITIZED SOLAR CELLS VIA WATER BATH METHOD

Zinc oxide (ZnO) nanowire (NW) films were synthesized at low temperature (95°C) through amine-assisted solution process and used as photoanode for the fabrication of dye-sensitized solar cells (DSSCs). It was found that with the addition of polyethyleneimine (PEI) and ammonium hydroxide (NH4OH) in growth solution, the NWs were smaller in diameter and longer in length by prolonging the growth time without refreshing the growth solution. A reasonable overall conversion efficiency of 1.25% was achieved with photoanode based on ZnO NWs containing PEI and NH4OH. However, DSSC fabricated with ZnO NWs not containing PEI and NH4OH showed low conversion efficiency of 0.58%. All the DSSCs exhibited almost similar values of open circuit voltage (VOC) and fill factor (FF). Interestingly, DSSC based on ZnO NWs with PEI and NH4OH obtained two times higher short circuit current density (JSC) compared to ZnO NWs photoanode without PEI and NH4OH. The increase in efficiency and JSC with the length of NWs is attributed to the increase in internal surface area for sufficient dye loading and light harvesting.