M.C.D.N.J.M. Huysmans

12-year Survival of Composite vs. Amalgam Restorations

Information about the long-term clinical survival of large amalgam and composite restorations is still lacking. This retrospective study compares the longevity of three- and four-/five-surface amalgam and composite restorations relative to patients’ caries risk. Patient records from a general practice were used for data collection. We evaluated 1949 large class II restorations (1202 amalgam/747 composite). Dates of placement, replacement, and failure were recorded, and caries risk of patients was assessed. Survival was calculated from Kaplan-Meier statistics. After 12 years, 293 amalgam and 114 composite restorations had failed. Large composite restorations showed a higher survival in the combined population and in the low-risk group. For three-surface restorations in high-risk patients, amalgam showed better survival.

Longevity of Posterior Composite Restorations A Systematic Review and Meta-analysis

The aim of this meta-analysis, based on individual participant data from several studies, was to investigate the influence of patient-, materials-, and tooth-related variables on the survival of posterior resin composite restorations. Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, we conducted a search resulting in 12 longitudinal studies of direct posterior resin composite restorations with at least 5 years’ follow-up. Original datasets were still available, including placement/failure/censoring of restorations, restored surfaces, materials used, reasons for clinical failure, and caries-risk status. A database including all restorations was constructed, and a multivariate Cox regression method was used to analyze variables of interest [patient (age; gender; caries-risk status), jaw (upper; lower), number of restored surfaces, resin composite and adhesive materials, and use of glass-ionomer cement as base/liner (present or absent)]. The hazard ratios with respective 95% confidence intervals were determined, and annual failure rates were calculated for subgroups. Of all restorations, 2,816 (2,585 Class II and 231 Class I) were included in the analysis, of which 569 failed during the observation period. Main reasons for failure were caries and fracture. The regression analyses showed a significantly higher risk of failure for restorations in high-caries-risk individuals and those with a higher number of restored surfaces.

Clinical Studies of Dental Erosion and Erosive Wear

We define erosion as apartial demineralisation of enamel or dentine by intrinsic or extrinsic acidsand erosive tooth wear as the accelerated loss of dental hard tissue through the combined effect of erosion and mechanical wear (abrasion and attrition) on the tooth surface. Most experts believe that during the last decade there has been a significant increase in the prevalence and severity of erosive tooth wear, particularly in adolescents. Even when erosive wear occurs in its milder forms, this is a matter of concern, as it may compromise the integrity of an otherwise healthy dentition in later life. The erosive wear process is complicated and modified by many chemical, behavioural and associated processes in the mouth. If interventions are to be developed it is therefore important that in vivo methods are developed to assess the outcomes of the erosion and erosive wear processes and the effects of interventions upon them. This paper discusses potential methods of investigating erosion and erosive wear in vivo and the difficulties associated with clinical studies.

Relationship between Mineral Distributions in Dentine Lesions and Subsequent Remineralization in vitro

Though the mineral distribution of the dentine carious lesion varies largely from tooth to tooth and from patient to patient, there are two main distribution profiles that characterize natural carious lesions in dentine. These profiles include softened and subsurface lesion types. The mineral distribution relationship between the starting profile and the profile after remineralization is not known. In order to study the relational aspects, we have produced demineralized dentine samples in vitro with mineral profiles similar to those of typical natural carious lesions, and subsequently remineralized the samples in a remineralizing solution with various fluoride concentrations (0, 2 and 10 ppm F). The mineral distributions were obtained by using an improved microradiographic technique. In addition, the nature of deposited mineral was analyzed by diamond–coupled total internal reflectance spectroscopy. Definite relationship was observed between the original lesion mineral distribution and the mineral distributions following remineralization. The amount of mineral present in approximately the first 50 μm of the lesion influenced the overall mineral profile after remineralization, possibly through influencing ion transport. If the amount was high (> approximately 10 vol%), the deposited mineral was confined to the surface (0–50 μm). The original mineral at those depths acted like a nucleus of mineral regrowth when the amount of residual mineral was intermediate, and like a transport barrier when the surface layer was well mineralized. If a surface barrier was not present, mineral was deposited at deeper depths in the lesion. Fluoride effect on dentine remineralization was dependent on the original mineral content and its distribution in the lesion. Although a high concentration of fluoride was very effective in low–mineral lesions, it produced hyperremineralization on well–mineralized subsurface lesions so that it prevented effective remineralization especially in deeper lesions.

Effect of Titanium Tetrafluoride, Amine Fluoride and Fluoride Varnish on Enamel Erosion in vitro

This study aimed at evaluating the effect of 1 and 4% titanium tetrafluoride (TiF4) gels, amine fluoride (AmF) 1 and 0.25% and a fluoride varnish (FP) on the prevention of dental erosion. Two experimental groups served as controls, one with no pretreatment and another one pretreated with a fluoride-free varnish (FP-blanco). Dental erosion was modelled using bovine enamel samples submitted to alternate cycles of acid exposure in citric acid and remineralization in artificial saliva. Calcium loss of all samples involved in the study was quantified by atomic absorption spectroscopy and erosion depths were estimated. Two samples of each experimental group were also analyzed by white light confocal microscopy. The cumulative erosion depth (in µm) after 72 min was: TiF4 gel 1% 8.29 ± 0.39; TiF4 gel 4% 8.27 ± 0.55; AmF 1% 8.69 ± 0.66; AmF 0.25% 8.86 ± 0.33; FP 3.43 ± 1.07; FP-blanco 14.86 ± 1.59 and control 9.77 ± 0.49. A statistically significant protective effect (p ≤ 0.001) was found only for the group pretreated with the fluoride varnish. Within the limitations of an in vitro study it may be concluded that topical applications of the fluoride varnish tested have a protective effect on the prevention of dental erosion.

Ultrasonic measurement of enamel thickness: a tool for monitoring dental erosion?

OBJECTIVES Wear of dental hard tissues, e.g. dental erosion, is reported to be a growing problem. A non-destructive measurement of enamel layer thickness would provide the opportunity for both early diagnosis, and longitudinal measurement of progressive enamel loss. It was the aim of this study to investigate the potential of ultrasonic pulse-echo measurements for the enamel thickness measurement. METHODS Nine extracted human incisor teeth were selected and stored in physiological saline. Mesial and distal tooth parts were removed, resulting in a central tooth slice of about 2 mm thickness. Where possible three buccal, and one palatal measuring sites were selected and indicated by pencil marks on one of the section planes. Ultrasonic pulse-echo measurements were made at each site using a Panametrics 25DL thickness gauge (Panametrics, Waltham, MA, USA), using a perspex delay line transducer (15 MHz) and glycerine coupling medium. Ultrasonic measurements were validated by measuring the thickness of the enamel layer at the marked side of the tooth slices with a light stereomicroscope at 120 x magnification. Two observers performed independent measurements. RESULTS Limits of agreement for measurements by two observers (n = 42) were -0.09 and 0.09 mm. Measurements performed at 21 degrees C and 34 degrees C were not significantly different, as analysed by paired Students t-test (p = 0.19). Pearsons correlation coefficient between ultrasonic and microscopic measurements was 0.90. Analysis of all measurements from both observers at both temperatures yielded a sound velocity in enamel of 6.5 x 10(3) m/s (standard error 0.1 x 10(3) m/s). CONCLUSIONS It was concluded that the ultrasonic measurement of the enamel thickness is feasible without enamel preparation.

Caries Detection Methods: Can They Aid Decision Making for Invasive Sealant Treatment?

The decision to place sealants is a difficult one, and it has been suggested that in a low risk population it may be efficient to wait until caries is detected in the fissure. An invasive sealant technique with fissure preparation may then be indicated. The diagnostic method used in the indication of such a procedure should accurately detect both dentine caries and sound fissures: high sensitivity for dentine caries (at D3 threshold) with high specificity for enamel caries (at D1 threshold). The aims of this study were to assess the diagnostic performance of selected diagnostic methods at normal cut–offs for traditional dentine caries detection and at reduced cut–offs in relation to the desired performance mentioned above, and to assess whether fissure opening allows for accurate visual detection of dentinal caries. Data were obtained from 230 occlusal sites of 101 extracted human molar teeth. Diagnostic methods used on the entire sample were: visual inspection, electrical conductance measurements and laser fluorescence measurements. The sample was then divided into two groups. Group 1 was subjected to visual inspection after application of a dye. Group 2 was subjected to visual inspection after fissure opening only, and after subsequent dye application. Validation was performed by histological investigation. The results with cut–offs normally used in dentine caries detection were roughly in accordance with the literature, except for laser fluorescence. The sensitivity of visual inspection for dentinal caries (D3) was 17% before and 70% after fissure opening. Using reduced cut–offs, a 100% sensitivity (D3) was achieved with 2 methods, but this also resulted in 63 or 87% false positive diagnoses of sound surfaces. Visual inspection and electrical methods both showed a moderate to high sensitivity (D3) with a higher than 50% specificity (D1). It was concluded that visual inspection and electrical methods at reduced cut–offs may aid the indication of invasive sealant treatment. The visual detection of dentinal caries is substantially increased, but not perfect after fissure opening.

Reduction of Erosive Wear in situ by Stannous Fluoride-Containing Toothpaste

Background/Aims: Stannous fluoride (SnF) has been suggested as a dental erosion-preventive agent. The aim of this single-centre, randomized, double-blind, in situ study was to evaluate the effect of toothpastes with SnF in the prevention of erosive enamel wear. Methods: A combined split-mouth (extra-oral water or toothpaste brushing) and crossover (type of toothpaste) set-up was used. Twelve volunteers wore palatal appliances containing human enamel samples. Three toothpastes were used, in three consecutive runs, in randomized order: two toothpastes containing SnF (coded M and PE) and one toothpaste containing only sodium fluoride (coded C). On day 1 of each run the appliances were worn for pellicle formation. On days 2–5 the samples were also brushed twice with a toothpaste-water slurry or only water (control). Erosion took place on days 2–5 extra-orally 3 times a day (5 min) in a citric acid solution (pH 2.3). Enamel wear depth was quantified by optical profilometry. The effect of toothpastes was tested using General Linear Modeling. Results: Average erosive wear depth of control samples was 23 µm. Both SnF toothpastes significantly reduced erosive wear: M by 34% (SD 39%) and PE by 26% (SD 25%). The control toothpaste reduced erosive wear non-significantly by 7% (SD 20%). Both SnF-containing toothpastes significantly reduced erosive wear compared to the sodium fluoride toothpaste. Conclusion: We conclude that SnF-containing toothpastes are able to reduce erosive tooth wear in situ.

Multifactorial Analysis of Factors Associated with the Incidence and Progression of Erosive Tooth Wear

To prevent erosive tooth wear, early diagnosis and identification of causative factors are essential. The aim of the present 3-year longitudinal study was to investigate the association between a broad collection of biological and behavioural factors and the incidence and progression of erosive tooth wear among adolescents. The study sample consisted of 656 attendees of a dental clinic with at baseline a mean age of 11.9 years (SD = 0.9). The criteria for the assessment of erosive wear were a modification of the erosion criteria developed by Lussi [Eur J Oral Sci 1996;104:191–198]. Information on biological and behavioural factors was gathered by clinical examinations (at baseline, after 1.5 and 3 years) and by self-reported questionnaires (completed semi-annually). Of the erosion-free children at baseline, 24.2% developed erosive wear. In children with erosion at baseline, 68.3% showed progression. Multivariate analyses showed significant associations between the incidence of erosive tooth wear and alcoholic mixed drinks (odds ratio, OR = 1.82), sour vegetables (OR = 1.16) and tooth grinding (OR = 4.03). The intake of yoghurt products was significantly negatively associated with the incidence of erosive wear (OR = 0.79). The interaction of acidic products and tooth grinding showed a significant extra risk (OR = 1.2). The intake of vitamins was positively associated with progression (OR = 2.03). Erosive wear was less likely to progress in subjects who consumed milk and yoghurt products (OR = 0.89 and 0.76, respectively). The present study showed that the aetiology of erosive tooth wear is complex. Possible aetiological factors include more than acidic drinks, and factors such as tooth grinding play a large role.

Inhibition of Erosive Wear by Fluoride Varnish

It has been suggested that fluoride products with a protective mechanical component are advantageous in the prevention of erosive wear. The aim of this study was to evaluate in situ the effect of fluoride varnish (FV) in the prevention of wear due to erosion and combined erosion and toothbrush abrasion. Eleven volunteers wore for 3 weeks, during working hours, appliances containing 2 control and 2 FV-treated human enamel samples. Erosion took place extraorally 3 times a day (5 min) in the soft drink Sprite. At the end of each experimental day one control and one FV sample (C-er+abr and FV-er+abr) were brushed (5 s) with fluoridated dentrifice. The remaining control and FV sample (C-er and FV-er) were left unbrushed. Enamel volume loss was quantified by optical profilometry at day 5, 10 and 15. A statistically significant progression in enamel loss was found for the C-er, C-er+abr and FV-er+abr groups (p < 0.001, p < 0.001 and p = 0.001, respectively) but not for the FV-er group (p = 0.053). The values of cumulative normalized volume loss (×108 µm) at day 15 were: C-er 5.53 ± 2.14, C-er+abr 5.70 ± 2.07, FV-er 0.79 ± 0.67 and FV-er+abr 2.76 ± 1.35. The FV-er and FV-er+abr groups showed significant lower volume loss than the C-er group (p < 0.001 and p = 0.005, respectively) and the C-er+abr group (p < 0.001 and p = 0.002, respectively). The results indicate that fluoride varnish is effective in the reduction of erosive wear.