M.E. Mauel

Modeling of active control of external magnetohydrodynamic instabilities

A general circuit formulation of resistive wall mode (RWM) feedback stabilization developed by Boozer [Phys. Plasmas 5, 3350 (1998)] has been used as the basis for the VALEN computer code that calculates the performance of an active control system in arbitrary geometry. The code uses a finite element representation of a thin shell structure in an integral formulation to model arbitrary conducting walls. This is combined with a circuit representation of stable and unstable plasma modes. Benchmark comparisons of VALEN results with large aspect ratio analytic model of the current driven kink mode are in very good agreement. VALEN also models arbitrary sensors, control coils, and the feedback logic connecting these sensors and control coils to provide a complete simulation capability for feedback control of plasma instabilities. VALEN modeling is in good agreement with experimental results on DIII-D [Garofalo et al., Nucl. Fusion 40, 1491 (2000)] and HBT-EP [Cates et al., Phys. Plasmas 7, 3133 (2000)]. VALEN ...

Dipole equilibrium and stability

A plasma confined in a dipole field exhibits unique equilibrium and stability properties. In particular, equilibria exist at all beta values and these equilibria are found to be stable to ballooning modes when they are interchange stable. When a kinetic treatment is performed at low beta, a drift temperature gradient mode is also found which couples to the MHD mode in the vicinity of marginal interchange stability.

EFFECT OF TOROIDAL PLASMA-FLOW AND FLOW SHEAR ON GLOBAL MAGNETOHYDRODYNAMIC MHD MODES

The effect of a subsonic toroidal flow on the linear magnetohydrodynamic stability of a tokamak plasma surrounded by an external resistive wall is studied. A complex non‐self‐adjoint eigenvalue problem for the stability of general kink and tearing modes is formulated, solved numerically, and applied to high β tokamaks. Results indicate that toroidal plasma flow, in conjunction with dissipation in the plasma, can open a window of stability for the position of the external wall. In this window, stable plasma beta values can significantly exceed those predicted by the Troyon scaling law with no wall. Computations utilizing experimental data indicate good agreement with observations.

Wall stabilization of high beta plasmas in DIII-D

Detailed analysis of recent high beta discharges in the DIII-D tokamak demonstrates that the resistive vacuum vessel can provide stabilization of low n magnetohydrodynamic (MHD) modes. The experimental beta values reaching up to {beta}{sub T} = 12.6% are more than 30% larger than the maximum stable beta calculated with no wall stabilization. Plasma rotation is essential for stabilization. When the plasma rotation slows sufficiently, unstable modes with the characteristics of the predicted {open_quotes}resistive wall{close_quotes} mode are observed. Through slowing of the plasma rotation between the q = 2 and q = 3 surfaces with the application of a non-axisymmetric field, the authors have determined that the rotation at the outer rational surfaces is most important, and that the critical rotation frequency is of the order of {Omega}/2{pi} = 1 kHz.

A D-3He fusion reactor based on a dipole magnetic field

An innovative fusion reactor suitable for D-3He fuel is proposed; it is based on a dipole magnetic field produced by a levitated superconducting coil. The equilibrium plasma, whose phase space density satisfies ∂f0(μ,J,ψ)/∂ψ = 0, where ψ is the flux function, has a steep enough pressure profile for an efficient fusion reaction yet is stable to low frequency instabilities for local beta exceeding unity. At the outer wall, the plasma is stabilized by line tying or localized magnetic cusps which can be used for direct conversion. The fusion product confinement time can be controlled for ash removal by breaking the axisymmetry of the dipole magnetic field. A conceptual 70 MW reactor design is presented.

High poloidal beta equilibria in the Tokamak Fusion Test Reactor limited by a natural inboard poloidal field null

Recent operation of the Tokamak Fusion Test Reactor (TFTR) [Plasma Phys. Controlled Nucl. Fusion Research 1, 51 (1986)] has produced plasma equilibria with values of Λ≡βp eq+li/2 as large as 7, eβp dia≡2μ0e〈p⊥〉/〈〈Bp〉〉2 as large as 1.6, and Troyon normalized diamagnetic beta [Plasma Phys. Controlled Fusion 26, 209 (1984); Phys. Lett. 110A, 29 (1985)], βNdia≡108〈βt⊥〉aB0/Ip as large as 4.7. When eβp dia≳1.25, a separatrix entered the vacuum chamber, producing a naturally diverted discharge that was sustained for many energy confinement times, τE. The largest values of eβp and plasma stored energy were obtained when the plasma current was ramped down prior to neutral beam injection. The measured peak ion and electron temperatures were as large as 24 and 8.5 keV, respectively. Plasma stored energy in excess of 2.5 MJ and τE greater than 130 msec were obtained. Confinement times of greater than 3 times that expected from L‐mode predictions have been achieved. The fusion power gain QDD reached a value of 1.3×10−...

Suppression of resistive wall instabilities with distributed, independently controlled, active feedback coils

External kink instabilities are suppressed in a tokamak experiment by either (1) energizing a distributed array of independently controlled active feedback coils mounted outside a segmented resistive wall or (2) inserting a second segmented wall having much higher electrical conductivity. When the active feedback coils are off and the highly conducting wall is withdrawn, kink instabilities excited by plasma current gradients grow at a rate comparable to the magnetic diffusion rate of the resistive wall.

Demonstration of high-performance negative central magnetic shear discharges in the DIII-D tokamak

Reliable operation of discharges with negative central magnetic shear has led to significant increases in plasma performance and reactivity in both low confinement, L‐mode, and high confinement, H‐mode, regimes in the DIII‐D tokamak [Plasma Physics and Controlled Nuclear Fusion Research 1986 (International Atomic Energy Agency, Vienna, 1987), Vol. 1, p. 159]. Using neutral beam injection early in the initial current ramp, a large range of negative shear discharges have been produced with durations lasting up to 3.2 s. The total noninductive current (beam plus bootstrap) ranges from 50% to 80% in these discharges. In the region of shear reversal, significant peaking of the toroidal rotation [fφ(0)∼30–60 kHz] and ion temperature [Ti(0)∼15–22 keV] profiles are observed. In high‐power discharges with an L‐mode edge, peaked density profiles are also observed. Confinement enhancement factors up to H≡τE/τITER‐89P∼2.5 with an L‐mode edge, and H∼3.3 in an edge localized mode (ELM)‐free H mode, are obtained. Transp...

Overview of TFTR transport studies

A review of TFTR plasma transport studies is presented. Parallel transport and the confinement of suprathermal ions are found to be relatively well described by theory. Cross-field transport of the thermal plasma, however, is anomalous with the momentum diffusivity being comparable to the ion thermal diffusivity and larger than the electron thermal diffusivity in neutral beam heated discharges. Perturbative experiments have studied nonlinear dependencies in the transport coefficients and examined the role of possible nonlocal phenomena. The underlying turbulence has been studied using microwave scattering, beam emission spectroscopy and microwave reflectometry over a much broader range in k perpendicular to than previously possible. Results indicate the existence of large-wavelength fluctuations correlated with enhanced transport.

Dynamical plasma response of resistive wall modes to changing external magnetic perturbations

The plasma response to external resonant magnetic perturbations is measured as a function of stability of the resistive wall mode (RWM). The magnetic perturbations are produced with a flexible, high-speed waveform generator that is preprogrammed to drive an in-vessel array of 30 independent control coils and to produce an m/n=3/1 helical field. Both quasi-static and “phase-flip” magnetic perturbations are applied to time-evolving discharges in order to observe the dynamical response of the plasma as a function of RWM stability. The evolving stability of the RWM is estimated using equilibrium reconstructions and ideal stability computations, facilitating comparison with theory. The plasma resonant response depends upon the evolution of the edge safety factor, q*, and the plasma rotation. For discharges adjusted to maintain relatively constant edge safety factor, q*<3, the amplitude of the plasma response to a quasistatic field perturbation does not vary strongly near marginal stability and is consistent wi...