M. N. Quinn

Effects of front surface plasma expansion on proton acceleration in ultraintense laser irradiation of foil targets

The properties of beams of high energy protons accelerated during ultraintense, picosecond laser-irradiation of thin foil targets are investigated as a function of preplasma expansion at the target front surface. Significant enhancement in the maximum proton energy and laser-to-proton energy conversion efficiency is observed at optimum preplasma density gradients, due to self-focusing of the incident laser pulse. For very long preplasma expansion, the propagating laser pulse is observed to filament, resulting in highly uniform proton beams, but with reduced flux and maximum energy.

Refluxing of fast electrons in solid targets irradiated by intense, picosecond laser pulses

The propagation of fast electrons produced in the interaction of relativistically intense, picosecond laser pulses with solid targets is experimentally investigated using K-alpha emission as a diagnostic. The role of fast electron refluxing within the target, which occurs when the electrons are reflected by the sheath potentials formed at the front and rear surfaces, is elucidated. The targets consist of a Cu fluorescence layer of fixed thickness at the front surface backed with a propagation layer of CH, the thickness of which is varied to control the number of times the refluxing fast electron population transits the Cu fluorescence layer. Enhancements in the K-alpha yield and source size are measured as the thickness of the CH layer is decreased. Comparison with analytical and numerical modelling confirms that significant refluxing occurs and highlights the importance of considering this phenomenon when deriving information on fast electron transport from laser-solid interaction experiments involving relatively thin targets.

Carbon ion acceleration from thin foil targets irradiated by ultrahigh-contrast, ultraintense laser pulses

In this study, ion acceleration from thin planar target foils irradiated by ultrahigh-contrast (10 10 ), ultrashort (50fs) laser pulses focused to intensities of 7◊10 20 Wcm 2 is investigated experimentally. Target normal sheath acceleration (TNSA) is found to be the dominant ion acceleration mechanism when the target thickness is >50nm and laser pulses are linearly polarized. Under these conditions, irradiation at normal incidence is found to produce higherenergyions thanobliqueincidenceat35 withrespectto thetargetnormal. Simulations using one-dimensional (1D) boosted and 2D particle-in-cell codes support the result, showing increased energy coupling efficiency to fast electrons for normal incidence. The effects of target composition and thickness on the acceleration of carbon ions are reported and compared to calculations using analytical models of ion acceleration. 5 Author to whom any correspondence should be addressed.

Fast electron propagation in high density plasmas created by shock wave compression

We present one of the first results of relativistic laser intensities of the transport of fast electrons in high density and warm plasmas. The fast electrons are produced by the interaction of 40 J, 1 ps, 5 × 1019 W cm−2 laser pulses with solid foil targets. A 200 J, 1.5 ns laser focalized over a 500 µm diameter zone on the opposite side of the foil is used to create a shock propagating through and compressing the target to 2-3 times its solid density before the relativistic interaction. For both the solid and the compressed cases, the fast electron transport divergence and range are investigated, via the Kα emission from an embedded copper layer, for a conducting (aluminium) and an insulating (plastic) target material.

Surface transport of energetic electrons in intense picosecond laser-foil interactions

The angular distribution of energetic electrons emitted from thin foil targets irradiated by intense, picosecond laser pulses is measured as a function of laser incidence angle, intensity, and polarization. Although the escaping fast electron population is found to be predominantly transported along the target surface for incidence angles ≥65°, in agreement with earlier work at lower intensities, rear-surface proton acceleration measurements reveal that a significant electron current is also transported longitudinally within the target, irrespective of incident angle. These findings are of interest to many applications of laser-solid interactions, including advanced schemes for inertial fusion energy.

Controlling the properties of ultraintense laser-proton sources using transverse refluxing of hot electrons in shaped mass-limited targets

Compared with conventional bulk metallic glasses, Ce-based and Zn-based bulk metallic glasses have received considerable attention because of their possible application as structural and functional materials. Kinetic fragility parameter m in amorphous material presents degree of deviations from the Arrhenius law above the glass transition temperature (T-g) of the material. Kinetic fragility parameter (m) and Kauzmann temperature (T-K) in (Ce0.72Cu0.28)(90-x) Al10Fex (x = 0, 5 or 10) and Zn38Mg12Ca32Yb18 bulk metallic glasses have been determined by differential scanning calorimetry (DSC). Results show that Zn38Mg12Ca32Yb18 presents a higher m than (Ce0.72Cu0.28)(90-x) Al10Fex (x = 0, 5 or 10). The activation energies E-g for glass transition are 1.51 eV (x = 0), 1.59 eV (x = 5) and 1.83 eV (x = 10) in (Ce0.72Cu0.28)(90-x) Al10Fex (x = 0, 5 or 10), and 3.59 eV in Zn38Mg12Ca32Yb18, respectively. The values of E-g increase with increasing the Fe content in (Ce0.72Cu0.28)(90-x) Al10Fex (x = 0, 5 or 10) bulk metallic glasses. Kinetic fragility parameter in of bulk metallic glasses increases with the glass transition temperature T-g of bulk metallic glasses, in agreement with previous investigations

Laser pulse propagation and enhanced energy coupling to fast electrons in dense plasma gradients

Laser energy absorption to fast electrons during the interaction of an ultra-intense (10(20) Wcm(-2)), picosecond laser pulse with a solid is investigated, experimentally and numerically, as a function of the plasma density scale length at the irradiated surface. It is shown that there is an optimum density gradient for efficient energy coupling to electrons and that this arises due to strong self-focusing and channeling driving energy absorption over an extended length in the preformed plasma. At longer density gradients the laser filaments, resulting in significantly lower overall energy coupling. As the scale length is further increased, a transition to a second laser energy absorption process is observed experimentally via multiple diagnostics. The results demonstrate that it is possible to significantly enhance laser energy absorption and coupling to fast electrons by dynamically controlling the plasma density gradient.

Hollow microspheres as targets for staged laser-driven proton acceleration

A coated hollow core microsphere is introduced as novel target in ultra intense laser matter interaction experiments. In particular, it fa cilitates staged laser driven proton acceleration by combining conventional target normal sheath acceleration (TNSA), power recycling of hot laterally spreading electrons and staging in a very simple and cheap target geometry. During TNSA of protons from one area of the sphere surface, laterally spreading hot electrons forms a charge wave. Due to the spherical geometry, this wave refocuses on the opposite side of the sphere, where an opening has been laser micromachined. This leads to a strong transient charge separation field being set up there , which can post-accelerate those TNSA protons passing through the hole at the right time. Experimentally, the feasibility of using such targets are demonstrated. A redistribution is encountered in the experimental proton energy spectra, as predicted by particle-in-cell simulati ons and attributed to transient fields set up by oscillating currents on the sphere surface.

Influence of laser irradiated spot size on energetic electron injection and proton acceleration in foil targets

The influence of irradiated spot size on laser energy coupling to electrons, and subsequently to protons, in the interaction of intense laser pulses with foil targets is investigated experimentally. Proton acceleration is characterized for laser intensities ranging from 2 x 10(18) - 6 x 10(20) W/cm(2), by (1) variation of the laser energy for a fixed irradiated spot size, and (2) by variation of the spot size for a fixed energy. At a given laser pulse intensity, the maximum proton energy is higher under defocus illumination compared to tight focus and the results are explained in terms of geometrical changes to the hot electron injection

On the investigation of fast electron beam filamentation in laser-irradiated solid targets using multi-MeV proton emission

The transverse filamentation of beams of fast electrons transported in solid targets irradiated by ultraintense (5 × 1020 W cm−2), picosecond laser pulses is investigated experimentally. Filamentation is diagnosed by measuring the uniformity of a beam of multi-MeV protons accelerated by the sheath field formed by the arrival of the fast electrons at the rear of the target, and is investigated for metallic and insulator targets ranging in thickness from 50 to 1200 µm. By developing an analytical model, the effects of lateral expansion of electron beam filaments in the sheath during the proton acceleration process is shown to account for measured increases in proton beam nonuniformity with target thickness for the insulating targets.