Macarena Cristina Martínez-Rodríguez

Reducing bit flipping problems in SRAM physical unclonable functions for chip identification

Physical Unclonable functions (PUFs) have appeared as a promising solution to provide security in hardware. SRAM PUFs offer the advantage, over other PUF constructions, of reusing resources (memories) that already exist in many designs. However, their intrinsic noisy nature produces the so called bit flipping effect, which is a problem in circuit identification and secret key generation. The approaches reported to reduce this effect usually resort to the use of pre- and post-processing steps (such as Fuzzy Extractor structures combined with Error Correcting Codes), which increase the complexity of the system. This paper proposes a pre-processing step that reduces bit flipping problems without increasing the hardware complexity. The proposal has been verified experimentally with 90-nm SRAMs included in digital application specific integrated circuits (ASICs).

A Programmable and Configurable ASIC to Generate Piecewise-Affine Functions Defined Over General Partitions

This paper presents a programmable and configurable architecture and its inclusion in an Application Specific Integrated Circuit (ASIC) to generate Piecewise-Affine (PWA) functions. A Generic PWA form (PWAG) has been selected for integration, because of its suitability to implement any PWA function without resorting to approximation. The design of the ASIC in a 90 nm TSMC technology, its integration, test and characterization through different examples are detailed in the paper. Furthermore, the ASIC verification using an ASIC-in-the-loop methodology for embedded control applications is presented. To assess the characteristics of this verification, the double-integrator, a usual control application example has been considered. Experimental results validate the proposed architecture and the ASIC implementation.

Digital implementation of hierarchical piecewise-affine controllers

This paper proposes the design of hierarchical piecewise-affine (PWA) controllers to alleviate the processing time or prohibitive memory requirements of large controller structures. The constituent PWA modules of the hierarchical solution have fewer inputs and/or coarser partitions, so that they can reduce considerably the hardware resources required and/or the time response of the controller. A design methodology aided by CAD tools is employed to design the parameters of the controller, implement its architecture in an FPGA, and verify the static and dynamic behavior of the digital implementation by applying hardware-in-the-loop testing.

Design methodology for FPGA implementation of lattice piecewise-affine functions

This paper describes a design methodology to implement on FPGAs piecewise-affine (PWA) functions based on representation methods from the lattice theory. An off-line automatic processing starts at the algorithmic formulation of the problem, obtains the parameters required by a parameterized digital architecture, and ends with the bitstream to program an FPGA. The methodology has been proven to implement PWA functions on Xilinx FPGAs. The results are compared with other approaches for FPGA implementations of PWA functions.

Circuit implementation of piecewise-affine functions based on lattice representation

This paper introduces a digital architecture to implement piecewise-affine (PWA) functions based on representation methods from the lattice theory. Given an explicit and continuous PWA function, the parameters required to implement the lattice approach can be obtained by an off-line preprocessing that can be automated. Other advantages of the proposal are that it implements a continuous PWA function with potentially no errors and the minimum number of parameters to store. This has been proven experimentally by implementing the proposal in a Xilinx FPGA and comparing its performance with other implementations, all of them addressing a typical non linear control problem.

Digital VLSI Implementation of Piecewise-Affine Controllers Based on Lattice Approach

This paper presents a small, fast, low-power consumption solution for piecewise-affine (PWA) controllers. To achieve this goal, a digital architecture for very-large-scale integration (VLSI) circuits is proposed. The implementation is based on the simplest lattice form, which eliminates the point location problem of other PWA representations and is able to provide continuous PWA controllers defined over generic partitions of the input domain. The architecture is parameterized in terms of number of inputs, outputs, signal resolution, and features of the controller to be generated. The design flows for field-programmable gate arrays and application-specific integrated circuits are detailed. Several application examples of explicit model predictive controllers (such as an adaptive cruise control and the control of a buck-boost dc-dc converter) are included to illustrate the performance of the VLSI solution obtained with the proposed lattice-based architecture.

VLSI Design of Trusted Virtual Sensors

This work presents a Very Large Scale Integration (VLSI) design of trusted virtual sensors providing a minimum unitary cost and very good figures of size, speed and power consumption. The sensed variable is estimated by a virtual sensor based on a configurable and programmable PieceWise-Affine hyper-Rectangular (PWAR) model. An algorithm is presented to find the best values of the programmable parameters given a set of (empirical or simulated) input-output data. The VLSI design of the trusted virtual sensor uses the fast authenticated encryption algorithm, AEGIS, to ensure the integrity of the provided virtual measurement and to encrypt it, and a Physical Unclonable Function (PUF) based on a Static Random Access Memory (SRAM) to ensure the integrity of the sensor itself. Implementation results of a prototype designed in a 90-nm Complementary Metal Oxide Semiconductor (CMOS) technology show that the active silicon area of the trusted virtual sensor is 0.86 mm2 and its power consumption when trusted sensing at 50 MHz is 7.12 mW. The maximum operation frequency is 85 MHz, which allows response times lower than 0.25 μs. As application example, the designed prototype was programmed to estimate the yaw rate in a vehicle, obtaining root mean square errors lower than 1.1%. Experimental results of the employed PUF show the robustness of the trusted sensing against aging and variations of the operation conditions, namely, temperature and power supply voltage (final value as well as ramp-up time).

Application specific integrated circuit solution for multi‐input multi‐output piecewise‐affine functions

Summary This paper presents a fully digital architecture and its application specific integrated circuit implementation for computing multi-input multi-output (MIMO) piecewise-affine (PWA) functions. The work considers both PWA functions defined over regular hyperrectangular and simplicial partitions of the input domains and also lattice PWA representations. The proposed architecture is able to implement PWA functions following different realization strategies, using a common structure with a minimized number of blocks, thus reducing power consumption and hardware resources. Experimental results obtained with application specific integrated circuit (ASIC) integrated in a 90-nm complementary metal-oxide semiconductor standard technology are provided. The proposed architecture is compared with other digital architectures in the state of the art habitually used to implement model predictive control applications. The proposal is superior in power consumption (saving up to 86%) and economy of hardware resources (saving up to 40% in comparison with a mere replication of the three representations) to other proposals described in literature, being ready to be used in applications where high-performance and minimum unitary cost are required. Copyright

CMOS digital design of a trusted virtual sensor

This work presents the digital design of a trusted virtual sensor. The virtual sensor implements a piecewise-affine (PWA)-based model to estimate the sensed variable. The measurement is authenticated with the keyed-hash message authentication code (HMAC) standard. To ensure the integrity of the sensor, the static random access memory (SRAM) required by the sensor is also used as physical unclonable function (PUF). Implementation results of the design in a 90-nm CMOS technology show that the security blocks occupy 5.1% of the area occupied by the required PWA blocks and consume 15.4% of the power consumed by the required PWA blocks. The sensor is able to provide trusted outputs in 106.3 microseconds when working at 100 MHz.

Dedicated hardware IP module for fingerprint recognition

This work presents a dedicated hardware IP module for fingerprints recognition based on a feature, named QFingerMap, which is very suitable for VLSI design. FPGA implementation results of the IP module are given. A demonstrator has been developed to evaluate the IP module behavior in a real scenario.