Mahmoud Al-Hussein

In Situ X-ray Study of the Structural Evolution of Gold Nano-Domains by Spray Deposition on Thin Conductive P3HT Films

Gold (Au) nanoparticles are deposited from aqueous solution onto one of the most used conductive polymers, namely poly(3-hexylthiophene) (P3HT), using airbrush deposition. We report on the structure formation and packing of the Au nanoparticles after a 5 s spray cycle. In situ grazing incidence small-angle X-ray scattering (GISAXS) measurements with 20 ms time resolution allow a real-time observation of the emergence and evolution of the microstructure during a spray cycle and subsequent solvent evaporation. The results reveal multistage nanoscale ordering of the Au nanoparticles during the spray cycle. Further ex situ atomic force microscopy measurements of the sprayed films showed the formation of Au monolayer islands on top of the polymer film. Our study suggests that the solvent-substrate interaction as well as solvent evaporation kinetics are important factors that need to be taken into consideration in order to grow a compact uniform monolayer film for the fabrication of ultrathin films using airbrush deposition.

High Conductivity in Molecularly p‐Doped Diketopyrrolopyrrole‐Based Polymer: The Impact of a High Dopant Strength and Good Structural Order

[3]-Radialene-based dopant CN6-CP studied herein, with its reduction potential of +0.8 versus Fc/Fc+ and the lowest unoccupied molecular orbital level of -5.87 eV, is the strongest molecular p-dopant reported in the open literature, so far. The efficient p-doping of the donor-acceptor dithienyl-diketopyrrolopyrrole-based copolymer having the highest unoccupied molecular orbital level of -5.49 eV is achieved. The doped films exhibit electrical conductivities up to 70 S cm(-1) .

Influence of Semiconductor Thickness and Molecular Weight on the Charge Transport of a Naphthalenediimide-Based Copolymer in Thin-Film Transistors

The N-type semiconducting polymer, P(NDI2OD-T2), with different molecular weights (MW=23, 72, and 250 kg/mol) was used for the fabrication of field-effect transistors (FETs) with different semiconductor layer thicknesses. FETs with semiconductor layer thicknesses from ∼15 to 50 nm exhibit similar electron mobilities (μs) of 0.2-0.45 cm2 V(-1) s(-1). Reduction of the active film thickness led to decreased μ values; however, FETs with ∼2 and ∼5 nm thick P(NDI2OD-T2) films still exhibit substantial μs of 0.01-0.02 and ∼10(-4) cm2 V(-1) s(-1), respectively. Interestingly, the lowest molecular weight sample (P-23, MW≈23 kg/mol, polydispersity index (PDI)=1.9) exhibited higher μ than the highest molecular weight sample (P-250, MW≈250 kg/mol, PDI=2.3) measured for thicker devices (15-50 nm). This is rather unusual behavior because typically charge carrier mobility increases with MW where improved grain-to-grain connectivity usually enhances transport events. We attribute this result to the high crystallinity of the lowest MW sample, as confirmed by differential scanning calorimetry and X-ray diffraction studies, which may (over)compensate for other effects.

Liquid Crystallinity in Block Copolymer Films for Controlling Polymeric Nanopatterns

We review thin-film morphologies of hybrid liquid-crystalline/amorphous block copolymers. Themicrophase separation of the blocks and the smectic liquid crystalline ordering within one of theblocks are treated systematically in terms of the interaction parameters. The competition of the“tandem” interactions in terms of length scales and of surface anchoring can be used advantageouslyto control the orientation of block interfaces for nanopatterning.

Copolymerization of zinc-activated isoindigo- and naphthalene-diimide based monomers: an efficient route to low bandgap π-conjugated random copolymers with tunable properties

The present work aims at the extension of the scope of a recently discovered polycondensation of AB-type anion-radical monomers. To this end, we investigate the polymerization of isoindigo-based monomer and its copolymerization with the naphthalenediimide-based monomer. Although polycondensations of parent naphthalenediimide- and perylenediimide-based monomers involve chain-growth mechanism, we found that the corresponding isoindigo-based monomer polymerizes in a step-growth manner under the same reaction conditions. In contrast to Stille, Suzuki and direct arylation polycondensations which require prolonged stirring at high temperatures, the polymerization approach we employed in this study proceeds fast at room temperature. It was found that near statistical copolymerization of isoindigo-based anion-radical monomers with corresponding naphtalenediimide-based monomers proceeds smoothly resulting in a library of copolymers with varying composition and properties depending on the ratio of the monomers.

The impact of molecular weight, air exposure and molecular doping on the charge transport properties and electronic defects in dithienyl-diketopyrrolopyrrole-thieno[3,2-b]thiophene copolymers

We performed an in-depth study of high molecular weight poly[3,6-(dithiophene-2-yl)-2,5-di(2-octyldodecyl)-pyrrolo[3,4-c]pyrrole-1,4-dione-alt-thieno[3,2-b]thiophene] P(DPP2OD-TT) synthesized through the Stille coupling polycondensation in order to understand the correlation between molecular weight, processing conditions and charge transport. We observed a rapid increase in its aggregation in solution with increasing molecular weight which strongly limits the solubility and processability for weight average molecular weights beyond 200 kg mol−1. This results in severe limitation in the charge transport properties of the polymer. We further observe the presence of bulk electronic defects in all different polymer batches that severely limit the current flow and manifest themselves in organic field effect transistors as apparent charge density dependence of the mobility. These defects are passivated by exposure to an ambient atmosphere, as confirmed by an increase in current and mobility that is no more charge density dependent. This is further confirmed by the result of chemical doping using 2,2-(perfluoronaphthalene-2,6-diylidene)dimalononitrile, F6TCNNQ, which leads to the filling of the trap states and a higher charge density independent mobility of up to 1 cm2 V−1 s−1.

Sulfonated polyimide copolymers based on 4,4′-diaminostilbene-2,2′-disulfonic acid and 3,5,3′,5′-tetramethylbenzidine with enhanced solubility

A new series of six-membered ring sulfonated polyimides with different combinations of two comonomers in the nonsulfonated diamine was prepared by one-step high-temperature polycondensation in m-cresol to improve the solubility of the resulting sulfonated polyimides. They are based on 1,4,5,8-naphthalenetetracarboxylic dianhydride, 4,4′-diaminostilbene-2,2-disulfonic acid sulfonated diamine, and equimolar mixture of 3,5,3′,5′-tetramethylbenzidine (TMB) and 4,4′-oxydianiline, bis(4-aminophenyl)methane, or bis(4-(aminophenoxy)-4-phenyl)isopropylidene nonsulfonated diamines. The introduction of TMB comonomer in the nonsulfonated diamine resulted in a remarkable improvement in the solubility of the resulting polyimides in comparison with the corresponding single-monomer nonsulfonated diamine polyimides. Flexible, transparent, and tough membranes were prepared by solution casting method from the different polyimides. The membranes were characterized with FTIR and 1H-NMR spectroscopy, differential scanning calorimetry, thermogravimetric analysis, water uptake, and ion-exchange capacity measurements. They exhibit high thermal stability and good correlation between the ion-exchange capacity and water uptake values.