Manel Ribes-Dasi

Soil erosion caused by extreme rainfall events: mapping and quantification in agricultural plots from very detailed digital elevation models

This paper presents a method that can be used to quantify and map soil losses at field scale produced by extreme rainfall events. The amounts of sediment produced by overland flow and Ž. concentrated overland flow inter-rill, rill and gully erosion at the agricultural plot scale are evaluated from elevation differences computed from very high resolution digital elevation models Ž. DEMs , from before and just after an extreme rainfall event. Geographical Information Systems Ž. GIS techniques are used to analyse the multi-temporal spatial data. The research case study presented makes reference to a mechanised vineyard plot located in the Alt Penedes-Anoia region `

Innovative LIDAR 3D Dynamic Measurement System to Estimate Fruit-Tree Leaf Area

In this work, a LIDAR-based 3D Dynamic Measurement System is presented and evaluated for the geometric characterization of tree crops. Using this measurement system, trees were scanned from two opposing sides to obtain two three-dimensional point clouds. After registration of the point clouds, a simple and easily obtainable parameter is the number of impacts received by the scanned vegetation. The work in this study is based on the hypothesis of the existence of a linear relationship between the number of impacts of the LIDAR sensor laser beam on the vegetation and the tree leaf area. Tests performed under laboratory conditions using an ornamental tree and, subsequently, in a pear tree orchard demonstrate the correct operation of the measurement system presented in this paper. The results from both the laboratory and field tests confirm the initial hypothesis and the 3D Dynamic Measurement System is validated in field operation. This opens the door to new lines of research centred on the geometric characterization of tree crops in the field of agriculture and, more specifically, in precision fruit growing.

Real-Time Tree-Foliage Surface Estimation Using a Ground Laser Scanner

The optimization of most pesticide and fertilizer applications is based on overall grove conditions. In this paper, we propose a measurement system to estimate the foliage surface of a tree crop. The system is based on a ground laser scanner that estimates the volume of the trees and then extrapolates their leaf area using simple and fast algorithms to allow true real-time operation. Tests with pear trees demonstrated that the relation between the volume and the foliage can be interpreted as linear with a coefficient of correlation (R) of 0.81, and the foliage surface can be estimated from this volume with an average error less than 6%.

Real-Time Tree Foliage Estimation Using a Ground Laser Scanner

The optimization of most pesticide and fertilizer applications is based on overall grove conditions. In this work we propose a measurement system based on a ground laser scanner to estimate the volume of the trees and then extrapolate their foliage surface in real-time. Tests with pear trees demonstrated that the relation between the volume and the foliage can be interpreted as linear with a coefficient of correlation (R) of 0.81 and the foliar surface can be estimated with an average error less than 5%

Measurement of Spray Drift with a Specifically Designed Lidar System.

Field measurements of spray drift are usually carried out by passive collectors and tracers. However, these methods are labour- and time-intensive and only provide point- and time-integrated measurements. Unlike these methods, the light detection and ranging (lidar) technique allows real-time measurements, obtaining information with temporal and spatial resolution. Recently, the authors have developed the first eye-safe lidar system specifically designed for spray drift monitoring. This prototype is based on a 1534 nm erbium-doped glass laser and an 80 mm diameter telescope, has scanning capability, and is easily transportable. This paper presents the results of the first experimental campaign carried out with this instrument. High coefficients of determination (R2 > 0.85) were observed by comparing lidar measurements of the spray drift with those obtained by horizontal collectors. Furthermore, the lidar system allowed an assessment of the drift reduction potential (DRP) when comparing low-drift nozzles with standard ones, resulting in a DRP of 57% (preliminary result) for the tested nozzles. The lidar system was also used for monitoring the evolution of the spray flux over the canopy and to generate 2-D images of these plumes. The developed instrument is an advantageous alternative to passive collectors and opens the possibility of new methods for field measurement of spray drift.