Manosh C. Paul

Investigation of spiral blood flow in a model of arterial stenosis

The spiral component of blood flow has both beneficial and detrimental effects in human circulatory system [Stonebridge PA, Brophy CM. Spiral laminar flow in arteries? Lancet 1991; 338: 1360-1]. We investigate the effects of the spiral blood flow in a model of three-dimensional arterial stenosis with a 75% cross-sectional area reduction at the centre by means of computational fluid dynamics (CFD) techniques. The standard k-omega model is employed for simulation of the blood flow for the Reynolds number of 500 and 1000. We find that for Re=500 the spiral component of the blood flow increases both the total pressure and velocity of the blood, and some significant differences are found between the wall shear stresses of the spiral and non-spiral induced flow downstream of the stenosis. The turbulent kinetic energy is reduced by the spiral flow as it induces the rotational stabilities in the forward flow. For Re=1000 the tangential component of the blood velocity is most influenced by the spiral speed, but the effect of the spiral flow on the centreline turbulent kinetic energy and shear stress is mild. The results of the effects of the spiral flow are discussed in the paper along with the relevant pathological issues.

Large–Eddy simulation of pulsatile blood flow

Large-Eddy simulation (LES) is performed to study pulsatile blood flow through a 3D model of arterial stenosis. The model is chosen as a simple channel with a biological type stenosis formed on the top wall. A sinusoidal non-additive type pulsation is assumed at the inlet of the model to generate time dependent oscillating flow in the channel and the Reynolds number of 1200, based on the channel height and the bulk velocity, is chosen in the simulations. We investigate in detail the transition-to-turbulent phenomena of the non-additive pulsatile blood flow downstream of the stenosis. Results show that the high level of flow recirculation associated with complex patterns of transient blood flow have a significant contribution to the generation of the turbulent fluctuations found in the post-stenosis region. The importance of using LES in modelling pulsatile blood flow is also assessed in the paper through the prediction of its sub-grid scale contributions. In addition, some important results of the flow physics are achieved from the simulations, these are presented in the paper in terms of blood flow velocity, pressure distribution, vortices, shear stress, turbulent fluctuations and energy spectra, along with their importance to the relevant medical pathophysiology.

LES of non-Newtonian physiological blood flow in a model of arterial stenosis

Large Eddy Simulation (LES) is performed to study the physiological pulsatile transition-to-turbulent non-Newtonian blood flow through a 3D model of arterial stenosis by using five different blood viscosity models: (i) Power-law, (ii) Carreau, (iii) Quemada, (iv) Cross and (v) modified-Casson. The computational domain has been chosen is a simple channel with a biological type stenosis formed eccentrically on the top wall. The physiological pulsation is generated at the inlet of the model using the first four harmonic series of the physiological pressure pulse (Loudon and Tordesillas [1]). The effects of the various viscosity models are investigated in terms of the global maximum shear rate, post-stenotic re-circulation zone, mean shear stress, mean pressure, and turbulent kinetic energy. We find that the non-Newtonian viscosity models enlarge the length of the post-stenotic re-circulation region by moving the reattachment point of the shear layer separating from the upper wall further downstream. But the turbulent kinetic energy at the immediate post-lip of the stenosis drops due to the effects of the non-Newtonian viscosity. The importance of using LES in modelling the non-Newtonian physiological pulsatile blood flow is also assessed for the different viscosity models in terms of the results of the dynamic subgrid-scale (SGS) stress Smagorinsky model constant, C(s), and the corresponding SGS normalised viscosity.

Feasibility of a Photovoltaic–Thermoelectric Generator: Performance Analysis and Simulation Results

This paper describes a theoretical approach to evaluate the performance of a hybrid solar system made with photovoltaic cells and thermoelectric (TE) modules. After a brief treatment of the integrated system, energy conversion and performance parameters are evaluated through numerical simulations depending on the global radiation and temperature distribution obtained by the Joint Research Center of the European Commission and of the National Renewable Energy Laboratory. The contribution of TE module to total energy seems significant in southern European towns and less substantial when the locations considered are very distant from the equator and show the possibility of using TE devices for energy production.

Facile Surfactant‐Free Synthesis of p‐type SnSe Nanoplates with Exceptional Thermoelectric Power Factors

Abstract A surfactant‐free solution methodology, simply using water as a solvent, has been developed for the straightforward synthesis of single‐phase orthorhombic SnSe nanoplates in gram quantities. Individual nanoplates are composed of {100} surfaces with {011} edge facets. Hot‐pressed nanostructured compacts (E g≈0.85 eV) exhibit excellent electrical conductivity and thermoelectric power factors (S 2 σ) at 550 K. S 2 σ values are 8‐fold higher than equivalent materials prepared using citric acid as a structure‐directing agent, and electrical properties are comparable to the best‐performing, extrinsically doped p‐type polycrystalline tin selenides. The method offers an energy‐efficient, rapid route to p‐type SnSe nanostructures.

Pulsatile spiral blood flow through arterial stenosis

Pulsatile spiral blood flow in a modelled three-dimensional arterial stenosis, with a 75% cross-sectional area reduction, is investigated by using numerical fluid dynamics. Two-equation k-ω model is used for the simulation of the transitional flow with Reynolds numbers 500 and 1000. It is found that the spiral component increases the static pressure in the vessel during the deceleration phase of the flow pulse. In addition, the spiral component reduces the turbulence intensity and wall shear stress found in the post-stenosis region of the vessel in the early stages of the flow pulse. Hence, the findings agree with the results of Stonebridge et al. (2004). In addition, the results of the effects of a spiral component on time-varying flow are presented and discussed along with the relevant pathological issues.

LES of additive and non-additive pulsatile flows in a model arterial stenosis

Transition of additive and non-additive pulsatile flows through a simple 3D model of arterial stenosis is investigated by using a large eddy simulation (LES) technique. We find in both the pulsatile cases that the interaction of the two shear layers, one of which separates from the nose of the stenosis and the another one from its opposite wall, causes recirculation in the flow downstream of the stenosis where the nature of the transient flow becomes turbulent. The strength of this recirculation is found to be quite high from the non-additive pulsations when the flow Reynolds numbers, , for which both the pressure and shearing stresses take on an oscillating form at the post-stenotic region. Potential medical consequences of these results are discussed in the paper. In addition, some comparisons of the non-additive pulsatile results are given with those of both the additive pulsatile and steady flows. The capability of using LES to simulate the pulsatile transitional flow is also assessed, and the present results show that the smaller (subgrid) scales (SGS) contributes about 78% energy dissipation to the flow when the Reynolds number is taken as 2000. The level of SGS dissipation decreases as the Reynolds number is decreased. The numerical results are validated with the experimental data available in literature where a quite good agreement is found.

Scalable solar thermoelectrics and photovoltaics (SUNTRAP)

This paper presents the design, manufacture and electrical test of a novel integrated III:V low concentrator photovoltaic and thermoelectric device for enhanced solar energy harvesting efficiency. The PCB-based platform is a highly reliable means of controlling CPV cell operational temperature under a range of irradiance conditions. The design enables reproducible data acquisition from CPV solar cells whilst minimizing transient time for solid state cooling capability.

Numerical Investigation of the Linear Stability of a Free Convection Boundary Layer Flow Using a Thermal Disturbance With a Slowly Increasing Frequency

Numerical simulations are performed to investigate the linear stability of a two-dimensional incompressible free convection flow induced by a vertical semi-infinite heated flat plate. A small-amplitude local temperature disturbance with a slowly increasing frequency is introduced on the surface near to the leading edge in order to generate disturbance waves within the boundary layer. The aim is to compare the response of the thermal boundary layer with that obtained by selecting discrete disturbance frequencies. In the present study, air is considered to be the working fluid for which the value of the Prandtl number is taken to be Pr = 0.7. The computational results show that the disturbance decays initially until it reaches a critical distance, which depends on the current frequency of the disturbance. Thereafter the disturbance grows, but the growth rate also depends on the effective frequency of the disturbance. Comparisons with previous work using constant disturbance frequencies are given, and it is shown that the sine-sweep technique is an effective method for analyzing the instability of convectively unstable boundary layers.

Radiative heat transfer in a model gas turbine combustor

In this paper we have carried out a three-dimensional numerical study to investigate the radiative heat transfer in a model gas turbine combustor, representative of the Rolls-Royce Tay combustor. The Discrete Ordinate Method (DOM/Sn) in general body-fitted co-ordinate system is applied to solve the filtered Radiative Transfer Equation (RTE) for the radiation modelling and this has been combined with a Large Eddy Simulation (LES) of the flow, temperature and composition fields within the combustion chamber. The radiation considered in this work is due only to the hot combustion gases notably carbon dioxide (CO2) and water vapour (H2O) also known as non-luminous radiation. The instantaneous results of the radiation properties such as the incident radiation and the radiative energy source or sink as the divergence of the radiative heat fluxes are computed inside the combustion chamber and presented graphically.