Manuel A. Palacios

Rational design of a minimal size sensor array for metal ion detection.

The focus of this study was to demonstrate that, in the luminescent sensors, the signal transduction may possibly be the most important part in the sensing process. Rational design of fluorescent sensor arrays for cations utilizing extended conjugated chromophores attached to 8-hydroxyquinoline is reported. All of the optical sensors utilized in the arrays comprise the same 8-hydroxyquinoline (8-HQ) receptor and various conjugated chromophores to yield a different response to various metal cations. This is because the conjugated chromophores attached to the receptor are partially quenched in their resting state, and upon the cation coordination by the 8-HQ, the resulting metalloquinolinolate complex displays a change in fluorescence. A delicate balance of conjugation, fluorescence enhancement, energy transfer, and a heavy metal quenching effect results in a fingerprint-like pattern of responses for each sensor-cation complex. Principal component analysis (PCA) and linear discriminant analysis (LDA) are used to demonstrate the contribution of individual sensors within the array, information that may be used to design sensor arrays with the smallest number of sensor elements. This approach allows discriminating between 10 cations by as few as two or even one sensor element. Examples of arrays comprising various numbers of sensor elements and their utility in qualitative identification of Ca(2+), Mg(2+), Cd(2+), Hg(2+), Co(2+), Zn(2+), Cu(2+), Ni(2+), Al(3+), and Ga(3+) ions are presented. A two-member array was found to identify 11 analytes with 100% accuracy. Also the best two of the sensors were tested alone and both were found to be able to discriminate among the samples with 99% and 96% accuracy, respectively. To illustrate the utility of this approach to a real-world application, identification of enhanced soft drinks based on their Ca(2+), Mg(2+), and Zn(2+) cation content was performed. The same approach to reducing array elements was used to construct three- and two-member arrays capable of identifying these complex analytes with 100% accuracy.

A practical approach to optical cross-reactive sensor arrays

Supramolecular analytical chemistry has emerged as a new discipline at the interface of supramolecular and analytical chemistry. It focuses on analytical applications of molecular recognition and self-assembly. One of the important outcomes of the supramolecular analytical chemistry is the understanding of molecular aspects of sensor design, synthesis and binding studies of sensors while using rigorous methods of analytical chemistry as a touchstone to verify the viability of the supramolecular aspects of the sensor design. This critical review provides a simplified version of the chemometric procedures involved in realizing a successful analytical experiment that utilizes cross-reactive optical sensor arrays, and summarizes the current research in this field. This review also shows several examples of use of described chemometric methods for evaluation of chemosensors and sensor arrays. Thus, this review is aimed mostly at the readers who want to test their newly-developed chemosensors in cross-reactive arrays (169 references).

Simple Molecule-based Fluorescent Sensors For Vapor Detection Of Tnt

1,4-Diarylpentiptycenes (1a-e) were synthesized from 1,4-dichloro- or 1,4-difluoro-2,5-diarylbenzene derivatives by double base-promoted dehydrohalogenation to give corresponding arynes, which in the presence of anthracene undergo cycloaddition providing 1,4-diarylpentiptycenes in moderate overall yields. The resulting 1,4-diarylpentiptycenes show fluorescence modulated by the 1,4-aryl residues. The fluorescence is quenched in the presence of vapors of nitroaromatic compounds suggesting potential application in sensing of explosives.

Fluorescence sensor array for metal ion detection based on various coordination chemistries: general performance and potential application.

A sensor array containing 9 cross-reactive sensing fluorescent elements with different affinity and selectivity to 10 metal cations (Ca(2+), Mg(2+), Cd(2+), Hg(2+), Co(2+), Zn(2+), Cu(2+), Ni(2+), Al(3+), Ga(3+)) is described. The discriminatory capacity of the array was tested at different ranges of pH and at different cation concentrations using linear discriminant analysis (LDA). Qualitative identification of cations can be determined with over 96% of accuracy in a concentration range covering 3 orders of a magnitude (5-5000 microM). Quantitative analysis can be achieved with over 90% accuracy in the concentration range between 10 and 5000 microM. The array performance was also tested in identification of nine different mineral water brands utilizing their various electrolyte compositions and their Ca(2+), Mg(2+), and Zn(2+) levels. LDA cross-validation routine shows 100% correct classification for all trials. Preliminary results suggest that similar arrays could be used in testing of the consistency of the purification and manufacturing process of purified and mineral waters.

Polymer nanofibre junctions of attolitre volume serve as zeptomole-scale chemical reactors

Methods allowing chemical reactions to be carried out on ultra-small scales in a controllable fashion are potentially important for a number of disciplines, including molecular electronics, photonics and molecular biology, and may provide fundamental insight into chemistry in confined spaces. Ultra-small-scale reactions also circumvent potential problems associated with reagent and product toxicity, and reduce energy consumption and waste generation. Here, we report a technique for performing chemical reactions on a zeptomole (10(-21) mol) scale. We show that electrospun polymer nanofibres with a diameter of 100-300 nm can be loaded with reactants, and that the junctions formed between crossed nanofibres can function as attolitre-volume reactors. Exposure to heat or solvent vapours fuses the fibres and initiates the reaction. The reaction products can be analysed directly within the nanofibre junctions by fluorescence measurements and mass spectrometry, and solvent extraction of multiple reactors allows product identification by common micromethods such as high-performance liquid chromatography-mass spectrometry.

Iptycene-based fluorescent sensors for nitroaromatics and TNT.

Small-molecule fluorescent sensors (1-5) for the recognition of nitroaromatic compounds, such as 2,4-dinitrotoluene and the explosive TNT, were obtained by using a three-step dehydrohalogenation cycloaddition protocol. The interaction of the receptors and nitroaromatics was studied both in solution and in the solid state by using fluorescence spectroscopy and X-ray crystallography, respectively. It is shown that the iptycene receptors 1-5 provide a cavity suitable for binding nitroaromatic compounds in an edge-to-face mode, rather than simple ring-stacking interactions. The results obtained inspired us to develop an inexpensive, reliable and robust sensor for vapour detection of explosives. Polymer nanofibres are particularly suitable for the production of such TNT sensors as they accelerate the mass exchange between the polymer and the vapours of TNT. Quenching of the sensors took place within 1 min compared to 10 min for a glass-slide assay. Hence, the sensor performance can be improved by optimising the matrix material and morphology without resynthesising the sensor moieties.

Ultrafast energy transfer in oligofluorene-aluminum bis(8-hydroxyquinoline)acetylacetone coordination polymers.

Understanding the excited-state dynamics in conjugated systems can lead to their better utilization in optical sensors, organic photovoltaics (OPVs), and organic light-emitting diodes (OLEDs). We present the synthesis of self-assembled coordination polymers comprising two types of fluorescent moieties: discrete fluorene oligomers of a well-defined length (n = 1-9) connected via aluminum(III) bis(8-quinolinolate)acetylacetone joints. Due to their well-defined structure, these materials allowed for a detailed study of energy migration processes within the materials. Thus, femtosecond transient spectroscopy was used to study the ultrafast energy transfer from the oligofluorene to the quinolinolate moieties, which was found to proceed at a rate of 10(11) s(-1). The experimental results were found to be in agreement with the behavior predicted according to the Beljonnes improved Forster model of energy transfer. In addition, the solid-state and semiconductor properties of these coordination polymers allowed for the fabrication of OLEDs. Preliminary experiments with simple two- and three-layer devices fabricated by spin-coating yield bright yellow electroluminescence with maximum brightness of 6000 cd/m(2), with a turn-on voltage of approximately 6 V and a maximum external quantum efficiency of up to 1.2%, suggesting their potential for use in PLED applications.

Leveraging material properties in fluorescence anion sensor arrays: a general approach.

As the demand for probes suitable for sensor development increases, investigation of approaches that utilize known successful receptors gains in general importance. This study describes a two-prong approach that can be used as a guide to developing sensors from known receptors. First, the conversion of a simple receptor, calix[4]pyrrole, into a fluorescent probe to establish a ratiometric signal is described. Secondly, the sensors that employ an output from a single ratiometric calix[4]pyrrole probe are fabricated by using poly(ether-urethane) hydrogel copolymers. These hydrogels are designed to absorb, internalize and transport aqueous electrolytes. A sensor array of ten different poly(ether-urethane) matrices with varying comonomer proportions were doped with a single probe and were exposed to eight different anions: acetate, benzoate, fluoride, chloride, phosphate, pyrophosphate, hydrogen sulfide, and cyanide, eight urine samples and anti-inflammatory drugs (NSAIDs). The poly(ether-urethane) matrices comprise different proportions of anion-binding urethane moieties and different hydrophilicity given by the ratio between ethylene glycol ether and butylene glycol ether. This diversity in the hydration behavior provides different environment polarity, in which the recognition and self-assembly processes display enough diverse behavior to allow for unique response of the probe to the analytes. Furthermore, a single probe is shown to recognize eight different aqueous anions and eight urine samples when embedded in ten different polyurethanes in an array that displays 100 % classification accuracy. To demonstrate the potential of the concept for quantitative studies, an estimation of non-steroidal anti-inflammatory drugs ibuprofen and diclofenac in water and in saliva was performed. A limit of detection of 0.1 ppm and a dynamic range of 0.1-0.6 and 0.05-60 ppm was observed, respectively. Given the general difficulty of chemosensors to recognize aqueous anions, the fact that one probe recognizes eight different analytes attests to an enormous effect of the polymer environment on the recognition process. This method could be used to generate a variety of sensor arrays for various analyses including species that are difficult to recognize, such as small-molecule- and inorganic anions.

The power of the weak: recognition of ion pairs in water using a simple array sensor

An array sensor comprising six off-the-shelf indicators doped in a poly(ether-urethane) recognizes five cations, seven anions and thirty-five ion pairs at pH 5-9 in water. Such a discrimination capacity and recognition efficiency (6 : 35) with > or = 93% accuracy is rare. Low cost and wide availability of various polymers and indicators could make this approach useful in numerous applications.

Hydroxyquinolines with extended fluorophores: arrays for turn-on and ratiometric sensing of cations

8-Hydroxyquinoline-based ligands with extended conjugated fluorophores were designed to provide turn-on and ratiometric signal output optimized for use in fluorescence-based sensor arrays, where the changes in blue and green channels of the RGB signal are used to distinguish between cationic analytes.