Marc W. Crepeau

Decoding the massive genome of loblolly pine using haploid DNA and novel assembly strategies

BackgroundThe size and complexity of conifer genomes has, until now, prevented full genome sequencing and assembly. The large research community and economic importance of loblolly pine, Pinus taeda L., made it an early candidate for reference sequence determination.ResultsWe develop a novel strategy to sequence the genome of loblolly pine that combines unique aspects of pine reproductive biology and genome assembly methodology. We use a whole genome shotgun approach relying primarily on next generation sequence generated from a single haploid seed megagametophyte from a loblolly pine tree, 20-1010, that has been used in industrial forest tree breeding. The resulting sequence and assembly was used to generate a draft genome spanning 23.2 Gbp and containing 20.1 Gbp with an N50 scaffold size of 66.9 kbp, making it a significant improvement over available conifer genomes. The long scaffold lengths allow the annotation of 50,172 gene models with intron lengths averaging over 2.7 kbp and sometimes exceeding 100 kbp in length. Analysis of orthologous gene sets identifies gene families that may be unique to conifers. We further characterize and expand the existing repeat library based on the de novo analysis of the repetitive content, estimated to encompass 82% of the genome.ConclusionsIn addition to its value as a resource for researchers and breeders, the loblolly pine genome sequence and assembly reported here demonstrates a novel approach to sequencing the large and complex genomes of this important group of plants that can now be widely applied.

Population Genomics of Sub-Saharan Drosophila melanogaster: African Diversity and Non-African Admixture

Drosophila melanogaster has played a pivotal role in the development of modern population genetics. However, many basic questions regarding the demographic and adaptive history of this species remain unresolved. We report the genome sequencing of 139 wild-derived strains of D. melanogaster, representing 22 population samples from the sub-Saharan ancestral range of this species, along with one European population. Most genomes were sequenced above 25X depth from haploid embryos. Results indicated a pervasive influence of non-African admixture in many African populations, motivating the development and application of a novel admixture detection method. Admixture proportions varied among populations, with greater admixture in urban locations. Admixture levels also varied across the genome, with localized peaks and valleys suggestive of a non-neutral introgression process. Genomes from the same location differed starkly in ancestry, suggesting that isolation mechanisms may exist within African populations. After removing putatively admixed genomic segments, the greatest genetic diversity was observed in southern Africa (e.g. Zambia), while diversity in other populations was largely consistent with a geographic expansion from this potentially ancestral region. The European population showed different levels of diversity reduction on each chromosome arm, and some African populations displayed chromosome arm-specific diversity reductions. Inversions in the European sample were associated with strong elevations in diversity across chromosome arms. Genomic scans were conducted to identify loci that may represent targets of positive selection within an African population, between African populations, and between European and African populations. A disproportionate number of candidate selective sweep regions were located near genes with varied roles in gene regulation. Outliers for Europe-Africa FST were found to be enriched in genomic regions of locally elevated cosmopolitan admixture, possibly reflecting a role for some of these loci in driving the introgression of non-African alleles into African populations.

Sequencing and assembly of the 22-gb loblolly pine genome.

Conifers are the predominant gymnosperm. The size and complexity of their genomes has presented formidable technical challenges for whole-genome shotgun sequencing and assembly. We employed novel strategies that allowed us to determine the loblolly pine (Pinus taeda) reference genome sequence, the largest genome assembled to date. Most of the sequence data were derived from whole-genome shotgun sequencing of a single megagametophyte, the haploid tissue of a single pine seed. Although that constrained the quantity of available DNA, the resulting haploid sequence data were well-suited for assembly. The haploid sequence was augmented with multiple linking long-fragment mate pair libraries from the parental diploid DNA. For the longest fragments, we used novel fosmid DiTag libraries. Sequences from the linking libraries that did not match the megagametophyte were identified and removed. Assembly of the sequence data were aided by condensing the enormous number of paired-end reads into a much smaller set of longer “super-reads,” rendering subsequent assembly with an overlap-based assembly algorithm computationally feasible. To further improve the contiguity and biological utility of the genome sequence, additional scaffolding methods utilizing independent genome and transcriptome assemblies were implemented. The combination of these strategies resulted in a draft genome sequence of 20.15 billion bases, with an N50 scaffold size of 66.9 kbp.

Unique Features of the Loblolly Pine (Pinus taeda L.) Megagenome Revealed Through Sequence Annotation

The largest genus in the conifer family Pinaceae is Pinus, with over 100 species. The size and complexity of their genomes (∼20–40 Gb, 2n = 24) have delayed the arrival of a well-annotated reference sequence. In this study, we present the annotation of the first whole-genome shotgun assembly of loblolly pine (Pinus taeda L.), which comprises 20.1 Gb of sequence. The MAKER-P annotation pipeline combined evidence-based alignments and ab initio predictions to generate 50,172 gene models, of which 15,653 are classified as high confidence. Clustering these gene models with 13 other plant species resulted in 20,646 gene families, of which 1554 are predicted to be unique to conifers. Among the conifer gene families, 159 are composed exclusively of loblolly pine members. The gene models for loblolly pine have the highest median and mean intron lengths of 24 fully sequenced plant genomes. Conifer genomes are full of repetitive DNA, with the most significant contributions from long-terminal-repeat retrotransposons. In depth analysis of the tandem and interspersed repetitive content yielded a combined estimate of 82%.

The Drosophila Genome Nexus: A Population Genomic Resource of 623 Drosophila melanogaster Genomes, Including 197 from a Single Ancestral Range Population

Hundreds of wild-derived Drosophila melanogaster genomes have been published, but rigorous comparisons across data sets are precluded by differences in alignment methodology. The most common approach to reference-based genome assembly is a single round of alignment followed by quality filtering and variant detection. We evaluated variations and extensions of this approach and settled on an assembly strategy that utilizes two alignment programs and incorporates both substitutions and short indels to construct an updated reference for a second round of mapping prior to final variant detection. Utilizing this approach, we reassembled published D. melanogaster population genomic data sets and added unpublished genomes from several sub-Saharan populations. Most notably, we present aligned data from phase 3 of the Drosophila Population Genomics Project (DPGP3), which provides 197 genomes from a single ancestral range population of D. melanogaster (from Zambia). The large sample size, high genetic diversity, and potentially simpler demographic history of the DPGP3 sample will make this a highly valuable resource for fundamental population genetic research. The complete set of assemblies described here, termed the Drosophila Genome Nexus, presently comprises 623 consistently aligned genomes and is publicly available in multiple formats with supporting documentation and bioinformatic tools. This resource will greatly facilitate population genomic analysis in this model species by reducing the methodological differences between data sets.

Circumventing heterozygosity: sequencing the amplified genome of a single haploid Drosophila melanogaster embryo.

Heterozygosity is a major challenge to efficient, high-quality genomic assembly and to the full genomic survey of polymorphism and divergence. In Drosophila melanogaster lines derived from equatorial populations are particularly resistant to inbreeding, thus imposing a major barrier to the determination and analyses of genomic variation in natural populations of this model organism. Here we present a simple genome sequencing protocol based on the whole-genome amplification of the gynogenetically derived haploid genome of a progeny of females mated to males homozygous for the recessive male sterile mutation, ms(3)K81. A single “lane” of paired-end sequences (2 × 76 bp) provides a good syntenic assembly with >95% high-quality coverage (more than five reads). The amplification of the genomic DNA moderately inflates the variation in coverage across the euchromatic portion of the genome. It also increases the frequency of chimeric clones. But the low frequency and random genomic distribution of the chimeric clones limits their impact on the final assemblies. This method provides a solid path forward for population genomic sequencing and offers applications to many other systems in which small amounts of genomic DNA have unique experimental relevance.

Sequence of the Sugar Pine Megagenome.

Until very recently, complete characterization of the megagenomes of conifers has remained elusive. The diploid genome of sugar pine (Pinus lambertiana Dougl.) has a highly repetitive, 31 billion bp genome. It is the largest genome sequenced and assembled to date, and the first from the subgenus Strobus, or white pines, a group that is notable for having the largest genomes among the pines. The genome represents a unique opportunity to investigate genome “obesity” in conifers and white pines. Comparative analysis of P. lambertiana and P. taeda L. reveals new insights on the conservation, age, and diversity of the highly abundant transposable elements, the primary factor determining genome size. Like most North American white pines, the principal pathogen of P. lambertiana is white pine blister rust (Cronartium ribicola J.C. Fischer ex Raben.). Identification of candidate genes for resistance to this pathogen is of great ecological importance. The genome sequence afforded us the opportunity to make substantial progress on locating the major dominant gene for simple resistance hypersensitive response, Cr1. We describe new markers and gene annotation that are both tightly linked to Cr1 in a mapping population, and associated with Cr1 in unrelated sugar pine individuals sampled throughout the species’ range, creating a solid foundation for future mapping. This genomic variation and annotated candidate genes characterized in our study of the Cr1 region are resources for future marker-assisted breeding efforts as well as for investigations of fundamental mechanisms of invasive disease and evolutionary response.

Insights into the Loblolly Pine Genome: Characterization of BAC and Fosmid Sequences

Despite their prevalence and importance, the genome sequences of loblolly pine, Norway spruce, and white spruce, three ecologically and economically important conifer species, are just becoming available to the research community. Following the completion of these large assemblies, annotation efforts will be undertaken to characterize the reference sequences. Accurate annotation of these ancient genomes would be aided by a comprehensive repeat library; however, few studies have generated enough sequence to fully evaluate and catalog their non-genic content. In this paper, two sets of loblolly pine genomic sequence, 103 previously assembled BACs and 90,954 newly sequenced and assembled fosmid scaffolds, were analyzed. Together, this sequence represents 280 Mbp (roughly 1% of the loblolly pine genome) and one of the most comprehensive studies of repetitive elements and genes in a gymnosperm species. A combination of homology and de novo methodologies were applied to identify both conserved and novel repeats. Similarity analysis estimated a repetitive content of 27% that included both full and partial elements. When combined with the de novo investigation, the estimate increased to almost 86%. Over 60% of the repetitive sequence consists of full or partial LTR (long terminal repeat) retrotransposons. Through de novo approaches, 6,270 novel, full-length transposable element families and 9,415 sub-families were identified. Among those 6,270 families, 82% were annotated as single-copy. Several of the novel, high-copy families are described here, with the largest, PtPiedmont, comprising 133 full-length copies. In addition to repeats, analysis of the coding region reported 23 full-length eukaryotic orthologous proteins (KOGS) and another 29 novel or orthologous genes. These discoveries, along with other genomic resources, will be used to annotate conifer genomes and address long-standing questions about gymnosperm evolution.

An improved assembly of the loblolly pine mega-genome using long-read single-molecule sequencing

Abstract The 22-gigabase genome of loblolly pine (Pinus taeda) is one of the largest ever sequenced. The draft assembly published in 2014 was built entirely from short Illumina reads, with lengths ranging from 100 to 250 base pairs (bp). The assembly was quite fragmented, containing over 11 million contigs whose weighted average (N50) size was 8206 bp. To improve this result, we generated approximately 12-fold coverage in long reads using the Single Molecule Real Time sequencing technology developed at Pacific Biosciences. We assembled the long and short reads together using the MaSuRCA mega-reads assembly algorithm, which produced a substantially better assembly, P. taeda version 2.0. The new assembly has an N50 contig size of 25 361, more than three times as large as achieved in the original assembly, and an N50 scaffold size of 107 821, 61% larger than the previous assembly.

First Draft Assembly and Annotation of the Genome of a California Endemic Oak Quercus lobata Née (Fagaceae)

Oak represents a valuable natural resource across Northern Hemisphere ecosystems, attracting a large research community studying its genetics, ecology, conservation, and management. Here we introduce a draft genome assembly of valley oak (Quercus lobata) using Illumina sequencing of adult leaf tissue of a tree found in an accessible, well-studied, natural southern California population. Our assembly includes a nuclear genome and a complete chloroplast genome, along with annotation of encoded genes. The assembly contains 94,394 scaffolds, totaling 1.17 Gb with 18,512 scaffolds of length 2 kb or longer, with a total length of 1.15 Gb, and a N50 scaffold size of 278,077 kb. The k-mer histograms indicate an diploid genome size of ∼720–730 Mb, which is smaller than the total length due to high heterozygosity, estimated at 1.25%. A comparison with a recently published European oak (Q. robur) nuclear sequence indicates 93% similarity. The Q. lobata chloroplast genome has 99% identity with another North American oak, Q. rubra. Preliminary annotation yielded an estimate of 61,773 predicted protein-coding genes, of which 71% had similarity to known protein domains. We searched 956 Benchmarking Universal Single-Copy Orthologs, and found 863 complete orthologs, of which 450 were present in > 1 copy. We also examined an earlier version (v0.5) where duplicate haplotypes were removed to discover variants. These additional sources indicate that the predicted gene count in Version 1.0 is overestimated by 37–52%. Nonetheless, this first draft valley oak genome assembly represents a high-quality, well-annotated genome that provides a tool for forest restoration and management practices.