Marcin Pawlak

Molecularly Imprinted Polymer Microspheres Containing Photoswitchable Spiropyran-Based Binding Sites

A versatile approach for the preparation of photoswitchable molecularly imprinted polymers (MIPs) is proposed where the selective recognition and the photoresponsive function are assumed by two different monomers. As a proof of concept, MIP microspheres were synthesized by precipitation polymerization for recognizing terbutylazine, a triazine-type herbicide. Formation of the selective binding sites was based upon H-bonding interactions between the template and the functional monomer methacrylic acid, whereas a polymerizable spiropyran unit was incorporated into the polymer matrix to provide light-controllable characteristics. A trifunctional monomer, trimethylolpropane trimethacrylate, was used as a cross-linker. The imprinted particles exhibited considerable morphological differences compared to their nonimprinted counterparts as observed by scanning electron microscopy. The imprinting effect was confirmed by equilibrium rebinding studies. The photoresponsiveness of the polymer particles was visualized by fluorescence microscopy and further characterized by spectroscopy. The template binding behavior could be regulated by alternating UV and visible light illumination when analyte release and uptake was observed, respectively. Binding isotherms fitted by the Freundlich model revealed the photomodulation of the number of binding sites and their average affinity. This facile synthetic approach may give an attractive starting point to endow currently existing highly selective MIPs with photoswitchable properties, thereby extending the scope of spiropyran-based photoresponsive smart materials.

Direct Optical Carbon Dioxide Sensing Based on a Polymeric Film Doped with a Selective Molecular Tweezer-Type Ionophore

A novel optical method for the determination of CO(2) concentration in aqueous and gaseous samples of plasticized PVC film is presented. The detection principle makes use of a direct molecular recognition of the carbonate ion by a molecular tweezer-type ionophore, which has previously been demonstrated to exhibit excellent carbonate selectivity. The carbonate ion is extracted together with hydrogen ions into a polymeric film that contains the anion exchanger tridodecylmethylammonium chloride, a lipophilic, electrically charged, and highly basic pH indicator, which is used for the readout in absorbance mode, in addition to the lipophilic carbonate ionophore. According to known bulk optode principles, such an optical sensor responds to the product of the carbonate ion activity and the square of hydrogen ion activity. This quantity is thermodynamically linked to the activity of carbon dioxide. This allows one to realize a direct carbon dioxide sensor that does not make use of the traditional Severinghaus sensing principle of measuring a pH change upon CO(2) equilibration across a membrane. A selectivity analysis shows that common ions such as chloride are sufficiently suppressed for direct PCO(2) measurements in freshwater samples at pH 8. Chloride interference, however, is too severe for direct seawater measurements at the same pH. This may be overcome by placing a gas-permeable membrane over the optode sensing film. This is conceptually confirmed by establishing that the sensor is equally useful for gas-phase PCO(2) measurements. As expected, humid air samples are required for proper sensor functioning, as dry CO(2) gas will not cause any signal change. The sensor showed acceptable response times and good reproducibility under both conditions.

Photoresponsive Ion Extraction/Release Systems: Dynamic Ion Optodes for Calcium and Sodium Based on Photochromic Spiropyran

Photoresponsive ion extraction/release systems (PRIONERS) represent a highly interesting tool for the localized and time-controlled chemical perturbation of biological materials. We report here on our first results on phototriggered calcium and sodium exchanging materials. Such materials exist in two distinct states (“on” and “off”), depending on the wavelength of illumination. We used a combination of spectroscopic and electrochemical methods to obtain a better understanding of the dynamic processes involved in the triggered ion-exchange reaction upon activation of the photoactive compound. The driving force for the ion exchange is the light-induced acidity change of the chromoionophore. Activation with UV light generates a species in the membrane with an increased pKa. Protons are pulled into the membrane, and at the same time, ions are expelled. The selectivity of the system is determined by the employed ionophore. In contrast to photoresponsive ionophore-based systems, the concept presented here is applicable for virtually any ion of interest for which an ionophore exists.

A label-free potentiometric sensor principle for the detection of antibody-antigen interactions.

We report here on a new potentiometric biosensing principle for the detection of antibody-antigen interactions at the sensing membrane surface without the need to add a label or a reporter ion to the sample solution. This is accomplished by establishing a steady-state outward flux of a marker ion from the membrane into the contacting solution. The immunobinding event at the sensing surface retards the marker ion, which results in its accumulation at the membrane surface and hence in a potential response. The ion-selective membranes were surface-modified with an antibody against respiratory syncytial virus using click chemistry between biotin molecules functionalized with a triple bond and an azide group on the modified poly (vinyl chloride) group of the membrane. The bioassay sensor was then built up with streptavidin and subsequent biotinylated antibody. A quaternary ammonium ion served as the marker ion. The observed potential was found to be modulated by the presence of respiratory syncytial virus bound on the membrane surface. The sensing architecture was confirmed with quartz crystal microbalance studies, and stir effects confirmed the kinetic nature of the marker release from the membrane. The sensitivity of the model sensor was compared to that of a commercially available point-of-care test, with promising results.

Coulometric Sodium Chloride Removal System with Nafion Membrane for Seawater Sample Treatment

Seawater analysis is one of the most challenging in the field of environmental monitoring, mainly due to disparate concentration levels between the analyte and the salt matrix causing interferences in a variety of analytical techniques. We propose here a miniature electrochemical sample pretreatment system for a rapid removal of NaCl utilizing the coaxial arrangement of an electrode and a tubular Nafion membrane. Upon electrolysis, chloride is deposited at the Ag electrode as AgCl and the sodium counterions are transported across the membrane. This cell was found to work efficiently at potentials higher than 400 mV in both stationary and flow injection mode. Substantial residual currents observed during electrolysis were found to be a result of NaCl back diffusion from the outer side of the membrane due to insufficient permselectivity of the Nafion membrane. It was demonstrated that the residual current can be significantly reduced by adjusting the concentration of the outer solution. On the basis of ion chromatography results, it was found that the designed cell used in flow injection electrolysis mode reduced the NaCl concentration from 0.6 M to 3 mM. This attempt is very important in view of nutrient analysis in seawater where NaCl is a major interfering agent. We demonstrate that the pretreatment of artificial seawater samples does not reduce the content of nitrite or nitrate ions upon electrolysis. A simple diffusion/extraction steady state model is proposed for the optimization of the electrolysis cell characteristics.

Chronopotentiometric Carbonate Detection with All-Solid-State Ionophore-Based Electrodes

We present here for the first time an all-solid-state chronopotentiometric ion sensing system based on selective ionophores, specifically for the carbonate anion. A chronopotentiometric readout is attractive because it may allow one to obtain complementary information on the sample speciation compared to zero-current potentiometry and detect the sum of labile carbonate species instead of only ion activity. Ferrocene covalently attached to the PVC polymeric chain acts as an ion-to-electron transducer and provides the driving force to initiate the sensing process at the membrane-sample interface. The incorporation of a selective ionophore for carbonate allows one to determine this anion in a background electrolyte. Various inner electrolyte and all-solid-state-membrane configurations are explored, and localized carbonate depletion is only observed for systems that do not contain ion-exchanger additives. The square root of the transition times extracted from the inflection point of the chronopotentiograms as a function of carbonate specie concentration follows a linear relationship. The observed linear range is 0.03-0.35 mM in a pH range of 9.50-10.05. By applying the Sand equation, the diffusion coefficient of carbonate is calculated as (9.03 ± 0.91) 10(-6) cm(2) s(-1), which corresponds to the established value. The reproducibility of assessed carbonate is better than 1%. Additionally, carbonate is monitored during titrimetric analysis as a precursor to an in situ environmental determination. Based on these results, Fc-PVC membranes doped with ionophores may form the basis of a new family of passive/active all-solid-state ion selective electrodes interrogated by a current pulse.

In situ surface functionalization of plasticized poly(vinyl chloride) membranes by ‘click chemistry’

We report here for the first time a universal method to achieve a covalent surface modification of plasticized poly(vinyl chloride) (PVC). A copper(I)-catalyzed azide–alkyne cycloaddition (‘click chemistry’) is performed on plasticized PVC containing partial azide substitutions. This surface modification is performed under mild conditions after membrane casting and is likely to be generally applicable to electrochemical and optical sensors. The concept is illustrated by attaching fluorescein and sulfonated Nile blue derivatives, as well as tetraethylene glycol to the membrane surface. Characterization by confocal microscopy, ATR-IR, QCM, UV/Vis spectroscopy and pulsed chronopotentiometry supports the surface modification procedure. As an initial example of practical utility, tetraethylene glycol modification is shown to significantly reduce surface adsorption by albumin, as evidenced by QCM and electrochemical experiments.

Transport and accumulation of ferrocene tagged poly(vinyl chloride) at the buried interfaces of plasticized membrane electrodes

Cyclic voltammetry (CV), synchrotron radiation-X-ray photoelectron spectroscopy (SR-XPS) and near edge X-ray absorption fine structure (NEXAFS) show that oxidation of ferrocene tagged PVC induces an accumulation of high molecular weight polymer at the buried interface between the substrate electrode and the plasticized membrane.

Pulsed chronopotentiometric membrane electrodes based on plasticized poly(vinyl chloride) with covalently bound ferrocene functionalities as solid contact transducer

Ion-selective membrane materials based on poly(vinyl chloride) (PVC)-containing covalently attached redox-active ferrocene (Fc) groups are characterized here as all-solid-state pulsed voltammetric ion sensors. The redox capacity of the membrane increases 7-fold with a doubling of the Fc content and 3-fold with the addition of 10 wt % of the lipophilic electrolyte ETH 500, tetradodecylammonium tetrakis(4-chlorophenyl)borate. This salt improves the ionic conductivity of the membrane and appears to make the Fc groups electrochemically more accessible. A too high content of the two, on the other hand, was found to cause undesired sensitivity to redox-active species present in the sample solution. Dilution of the membrane with a plasticizer eliminated this redox sensitivity while preserving its high redox capacity. A practical application of the designed electrodes in electrochemical analysis was demonstrated with a multi-pulse protocol that includes a current-controlled ion uptake pulse, followed by an open-circuit potential (OCP) measurement and a regeneration pulse. Potentiometric calibration curves obtained with this protocol exhibited a linear response with near-Nernstian slopes for acetate, nitrate, chloride, and perchlorate ions with the selectivity expected for an ion-exchanging membrane.

Transportation and Accumulation of Redox Active Species at the Buried Interfaces of Plasticized Membrane Electrodes

The transportation and accumulation of redox active species at the buried interface between glassy carbon electrodes and plasticized polymeric membranes have been studied using synchrotron radiation X-ray photoelectron spectroscopy (SR-XPS), near edge X-ray absorption fine structure (NEXAFS), in situ electrochemical Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy, cyclic voltammetry (CV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS). Ferrocene tagged poly(vinyl chloride) [FcPVC], ferrocene (Fc), and its derivatives together with tetracyanoquinodimethane (TCNQ) doped plasticized polymeric membrane electrodes have been investigated, so as to extend the study of the mechanism of this reaction chemistry to different time scales (both small and large molecules with variable diffusion coefficients) using a range of complementary electrochemical and surface analysis techniques. This study also provides direct spectroscopic evidence for the transportation and electrochemical reactivity of redox active species, regardless of the size of the electrochemically reactive molecule, at the buried interface of the substrate electrode. With all redox dopants, when CA electrolysis was performed, redox active species were undetectable (<1 wt % of signature elements or below the detection limit of SR-XPS and NEXAFS) in the outermost surface layers of the membrane, while a high concentration of redox species was located at the electrode substrate as a consequence of the deposition of the reaction product (Fc(+)-anion complex) at the buried interface between the electrode and the membrane. This reaction chemistry for redox active species within plasticized polymeric membranes may be useful in the fashioning of multilayered polymeric devices (e.g., chemical sensors, organic electronic devices, protective laminates, etc.) based on an electrochemical tunable deposition of redox molecules at the buried substrate electrode beneath the membrane.