Marco Barbera

AXAF High-Resolution Camera (HRC): calibration and recalibration at XRCF and beyond

The high resolution camera (HRC) is a microchannel plate based imaging detector for the Advanced X-Ray Astrophysics Facility (AXAF) that will be placed in a high earth orbit scheduled for launch in August, 1998. An end-to-end calibration of the HRC and the AXAF high resolution mirror assembly (HRMA) was carried out at the Marshall Space Flight Centers X-Ray Calibration Facility (XRCF). This activity was followed by several modifications to the HRC to improve its performance, and a series of flat field calibrations. In this paper, and the following companion papers, we discuss the calibration plans, sequences, and results of these tests. At the time of this conference, the HRC has been fully flight qualified and is being integrated into the science instrument module (SIM) in preparation for integration into the AXAF spacecraft.

Role of clays in protecting adsorbed DNA against X-ray radiation

We studied the effects of soft X-rays radiation on free and clay (montmorillonite, kaolinite) adsorbed DNA. The DNA samples were exposed to X-rays of 1.49, 4.51 and 8.04 keV for exposure times ranging from 2 min up to 16 h. The biological transformation technique was used to estimate the damage of the DNA molecules. Free and clay adsorbed DNA are differently affected by X-rays. The former is damaged by X-rays and the level of damage depends on the energy dose rather than the hardness of the radiation. The clay adsorbed DNA is not damaged by X-rays for energy doses up to 5.8×10 4 erg. Clays materials could have protected the building blocks of life on the primordial Earth when the solar X-ray emission was much stronger than today.

The large area detector of LOFT: the Large Observatory for X-ray Timing

LOFT (Large Observatory for X-ray Timing) is one of the five candidates that were considered by ESA as an M3 mission (with launch in 2022-2024) and has been studied during an extensive assessment phase. It is specifically designed to perform fast X-ray timing and probe the status of the matter near black holes and neutron stars. Its pointed instrument is the Large Area Detector (LAD), a 10 m2-class instrument operating in the 2-30keV range, which holds the capability to revolutionise studies of variability from X-ray sources on the millisecond time scales. The LAD instrument has now completed the assessment phase but was not down-selected for launch. However, during the assessment, most of the trade-offs have been closed leading to a robust and well documented design that will be reproposed in future ESA calls. In this talk, we will summarize the characteristics of the LAD design and give an overview of the expectations for the instrument capabilities.

Performance and calibration of the AXAF High-Resolution Camera II: the spectroscopic detector

The high resolution camera (HRC) is one of two focal plane detector systems that will be flown on the Advanced X-ray Astrophysics Facility (AXAF). The HRC consists of two microchannel plate (MCP) detectors: one to provide large area, high position resolution imaging and timing (HRC-I), and a second (HRC-S) to provide a readout for the AXAF low energy transmission gratings. Each detector is composed of a chevron pair of CsI coated MCPs with a crossed grid charge detector and an Al/polyimide UV/ion shield. In this paper, we describe the operation, performance and calibration of the spectroscopic detector. In particular, we discuss the absolute quantum efficiency calibration, the point spread function of the instrument combined with the AXAF telescope, the count rate linearity, the spatial linearity, and the internal background of the instrument. Data taken in the laboratory and at the x-ray Calibration Facility at Marshall Space Flight Center are presented.

The x-ray microcalorimeter spectrometer onboard Athena

One of the instruments on the Advanced Telescope for High-Energy Astrophysics (Athena) which was one of the three missions under study as one of the L-class missions of ESA, is the X-ray Microcalorimeter Spectrometer (XMS). This instrument, which will provide high-spectral resolution images, is based on X-ray micro-calorimeters with Transition Edge Sensor (TES) and absorbers that consist of metal and semi-metal layers and a multiplexed SQUID readout. The array (32 x 32 pixels) provides an energy resolution of < 3 eV. Due to the large collection area of the Athena optics, the XMS instrument must be capable of processing high counting rates, while maintaining the spectral resolution and a low deadtime. In addition, an anti-coincidence detector is required to suppress the particle-induced background. Compared to the requirements for the same instrument on IXO, the performance requirements have been relaxed to fit into the much more restricted boundary conditions of Athena. In this paper we illustrate some of the science achievable with the instrument. We describe the results of design studies for the focal plane assembly and the cooling systems. Also, the system and its required spacecraft resources will be given.

The Palermo XACT facility: a new 35 m long soft x-ray beam-line for the development and calibration of next-generation x-ray observatories

The X-ray Astronomy Calibration and Testing (XACT) facility of the Instituto Nazionale di Astrofisica (INAF) at Osservatorio Astronomico di Palermo has recently undergone a major upgrade with the design and construction of a 35 meter long vacuum beam-line operating in the soft X-rays (0.1-20 keV) and the addition of new hardware to meet the requirements for testing and calibration of next generation X-ray missions. We report on the present configuration of the facility and briefly survey the range of its applications.

Status of the EPIC thin and medium filters on-board XMM-Newton after more than 10 years of operation I: laboratory measurements on back-up filters

After more than ten years of operation of the EPIC camera on board the X-ray observatory XMM-Newton, we have reviewed the status of its Thin and Medium filters by performing both laboratory measurements on back-up filters, and analysis of data collected in-flight. We have selected a set of Thin and Medium back-up filters among those still available in the EPIC consortium, and have started a program to investigate their status by different laboratory measurements including: UV/VIS transmission, X-ray transmission, RAMAN IR spectroscopy, X-Ray Photoelectron Spectroscopy, and Atomic Force Microscopy. We report the results of the measurements conducted up to now, and point out some lessons learned for the development and calibration programs of filters for X-ray detectors in future Astronomy missions.

NTD germanium-based microcalorimeters for hard x-ray spectroscopy

Composite microcalorimeters using neutron transmutation-doped germanium (NTD) thermistors have been tested at hard x-ray energies. We present a broad band spectrum showing the energy resolution at 60 keV to be approximately 50 eV. The application of these microcalorimeters to the field of nuclear line astrophysics is discussed.

Measurement of optical constants n and k of lexan and polyimide

We present preliminary results on a program aimed at characterizing the optical properties of materials of potential usage in filters for soft x-ray detectors. In particular, we discuss a method that we have used to derive and model the refractive index n and the extinction coefficient k of thin plastic film materials. The method is based on best fit estimates of the parameters of a quanto- mechanical model describing k. The value of n is then evaluated using the Kramers-Kronig relationship. This method has provided accurate values of previously unknown optical constants of polyimide and lexan allowing to model the transmission of multilayer filters such as the aluminized polyimide filters of the HRC on board Chandra X-ray Observatory.

X-ray optics made from thin plastic foils

New design concepts and materials can be used to produce very lightweight, thin foil approximations, to Wolter I and other x-ray optics. Structures are designed around a central hub and spacers that connect one spoked wheels. Figure defining, thin pins span the distance between the wheels. Thin, metal coated or multilayered, plastic foils can be formed into cones, cylinders or spirals for x-ray telescopes or lenses. Imaging and spectroscopic data obtained with x- ray lenses are presented and they indicate that a 60 cm diameter, 4.65 m focal length x-ray telescope can have a half power diameter of < 2 arcmin.