Marco Bieri

Atomically precise bottom-up fabrication of graphene nanoribbons

Graphene nanoribbons—narrow and straight-edged stripes of graphene, or single-layer graphite—are predicted to exhibit electronic properties that make them attractive for the fabrication of nanoscale electronic devices. In particular, although the two-dimensional parent material graphene exhibits semimetallic behaviour, quantum confinement and edge effects should render all graphene nanoribbons with widths smaller than 10 nm semiconducting. But exploring the potential of graphene nanoribbons is hampered by their limited availability: although they have been made using chemical, sonochemical and lithographic methods as well as through the unzipping of carbon nanotubes, the reliable production of graphene nanoribbons smaller than 10 nm with chemical precision remains a significant challenge. Here we report a simple method for the production of atomically precise graphene nanoribbons of different topologies and widths, which uses surface-assisted coupling of molecular precursors into linear polyphenylenes and their subsequent cyclodehydrogenation. The topology, width and edge periphery of the graphene nanoribbon products are defined by the structure of the precursor monomers, which can be designed to give access to a wide range of different graphene nanoribbons. We expect that our bottom-up approach to the atomically precise fabrication of graphene nanoribbons will finally enable detailed experimental investigations of the properties of this exciting class of materials. It should even provide a route to graphene nanoribbon structures with engineered chemical and electronic properties, including the theoretically predicted intraribbon quantum dots, superlattice structures and magnetic devices based on specific graphene nanoribbon edge states.

Porous graphenes: two-dimensional polymer synthesis with atomic precision.

We demonstrate, by surface-assisted coupling of specifically designed molecular building blocks, the fabrication of regular two-dimensional polyphenylene networks with single-atom wide pores and sub-nanometer periodicity.

Porous Graphene as an Atmospheric Nanofilter

The fabrication of nanoscale membranes exhibiting high selectivity is an emerging field of research. The possibility to use bottom-up approaches to fabricate a filter with porous graphene and analyze its functionality with first principle calculations is investigated. Here, the porous network is produced by self-assembly of the hexaiodo-substituted macrocycle cyclohexa-m-phenylene (CHP). The resulting porous network exhibits an extremely high selectivity in favor of H(2) and He among other atmospheric gases, such as Ne, O(2), N(2), CO, CO(2), NH(3), and Ar. The presented membrane is superior to traditional filters using polymers or silica and could have great potential for further technological applications such as gas sensors or fuel cells.

Surface-supported 2D heterotriangulene polymers

We report on the assembly of tribromo-substituted dimethylmethylene-bridged triphenylamine (heterotriangulene) on Ag(111). Depending on activation temperature, two-dimensional porous metal-coordination or covalent networks are obtained.

Furan Hydrogenation over Pt(111) and Pt(100) Single-Crystal Surfaces and Pt Nanoparticles from 1 to 7 nm: A Kinetic and Sum Frequency Generation Vibrational Spectroscopy Study

Sum frequency generation surface vibrational spectroscopy and kinetic measurements using gas chromatography have been used to systematically study the adsorption and hydrogenation of furan over Pt(111) and Pt(100) single-crystal surfaces and size-controlled 1.0-nm, 3.5-nm and 7.0-nm Pt nanoparticles at Torr pressures (10 Torr of furan, 100 Torr of H(2)) to form dihydrofuran, tetrahydrofuran, and the ring-cracking products butanol and propylene. As determined by SFG, the furan ring lies parallel to all Pt surfaces studied under hydrogenation conditions. Upright THF and the oxametallacycle intermediate are observed over the nanoparticle catalysts under reaction conditions. Butoxy increases in surface concentration over Pt(111) with increasing temperature in agreement with selectivity trends.

Probing chiral interfaces by infrared spectroscopic methods

Biological homochirality on earth and its tremendous consequences for pharmaceutical science and technology has led to an ever increasing interest in the selective production, the resolution and the detection of enantiomers of a chiral compound. Chiral surfaces and interfaces that can distinguish between enantiomers play a key role in this respect as enantioselective catalysts as well as for separation purposes. Despite the impressive progress in these areas in the last decade, molecular-level understanding of the interactions that are at the origin of enantiodiscrimination are lagging behind due to the lack of powerful experimental techniques to spot these interactions selectively with high sensitivity. In this article, techniques based on infrared spectroscopy are highlighted that are able to selectively target the chiral properties of interfaces. In particular, these methods are the combination of Attenuated Total Reflection InfraRed (ATR-IR) with Modulation Excitation Spectroscopy (MES) to probe enantiodiscriminating interactions at chiral solid-liquid interfaces and Vibrational Circular Dichroism (VCD), which is used to probe the structure of chirally-modified metal nanoparticles. The former technique aims at suppressing signals arising from non-selective interactions, which may completely hide the signals of interest due to enantiodiscriminating interactions. Recently, this method was successfully applied to investigate enantiodiscrimination at self-assembled monolayers of chiral thiols on gold surfaces. The nanometer size analogues of the latter--gold nanoparticles protected by a monolayer of a chiral thiol--are amenable to VCD spectroscopy. It is shown that this technique yields detailed structural information on the adsorption mode and the conformation of the adsorbed thiol. This may also turn out to be useful to clarify how chirality can be bestowed onto the metal core itself and the nature of the chirality of the latter, which is manifested in the metal-based circular dichroism activity of these nanoparticles.

Adsorption kinetics of L-glutathione on gold and structural changes during self-assembly: an in situ ATR-IR and QCM study

The adsorption of L-glutathione (gamma-Glu-Cys-Gly) from ethanol on gold surfaces was studied in situ by both attenuated total reflection infrared (ATR-IR) spectroscopy and using a quartz crystal microbalance (QCM). The molecule is firmly anchored to the gold surface through the thiol group. Different IR signals of adsorbed L-glutathione, notably the amide I and nu(-COOH), show significantly different behavior with time, which reveals that their increase is not related to adsorption (mass uptake) alone. This indicates that structural transformations take place during the formation of the self-assembled monolayer (SAM). In particular, the intensity of the acid signal increases quickly only within the first couple of minutes. The complexity of the self-assembling process is confirmed by QCM measurements, which show fast mass uptake within about 100 s followed by a considerably slower regime. The structural change superimposed on the mass uptake is, based on the in situ time-resolved ATR-IR measurements, assigned to the interaction of the acid group of the Gly moiety with the surface. The latter group is protonated in ethanol but deprotonates upon interaction with the gold surface. The protonation-deprotonation equilibrium is sensitive to external stimuli, such as the presence of dissolved L-glutathione molecules. The interaction of the acid group with the surface and concomitant deprotonation proceeds via two distinguishable steps, the first being a reorientation of the molecule, followed by the deprotonation.

Strain-relief pattern as guide for the formation of surface-supported bimolecular nanoribbons

We demonstrate the suitability of the Ag/Pt(111) strain-relief pattern as efficient template for controlling the formation of well defined heteromolecular nanostructures. Two different species of molecular building blocks with complementary end-group functionalities are combined on this surface, which results in the formation of robust bimolecular nanoribbons driven by the interplay of the site specific adsorption on the strain-relief pattern with the highly directional intermolecular hydrogen-bonding intrinsic to the free bimolecular system.

Probing chiral nanoparticles and surfaces by infrared spectroscopy

Chiral metal surfaces and nanoparticles have the potential to be used for the selective production, the resolution and the detection of enantiomers of a chiral compound, which renders them highly attractive in view of the tremendous consequences of homochirality on earth. Their capability to distinguish between enantiomers of a chemical compound relies on their structure and the ability to form intermolecular interactions. However, molecular-level understanding of the interactions that are at the origin of enantiodiscrimination is lagging behind due to the lack of powerful experimental techniques that are able to spot these interactions selectively with high sensitivity. In this article two techniques based on infrared spectroscopy are presented that are able to selectively target the chiral properties of nanoparticles and interfaces. These are the combination of attenuated total reflection infrared (ATR-IR) with modulation excitation spectroscopy (MES) to probe enantiodiscriminating interactions at chiral solid-liquid interfaces and vibrational circular dichroism (VCD), which is used to probe the structure of chirally modified metal nanoparticles.