Marco Laurenti

Nanobranched ZnO Structure: p‐Type Doping Induces Piezoelectric Voltage Generation and Ferroelectric–Photovoltaic Effect

Dr. M. Laurenti, Dr. G. Canavese, Dr. A. Sacco, Dr. M. Fontana, Dr. K. Bejtka, Dr. M. Castellino, Prof. C. F. Pirri, Dr. V. Cauda Center for Space Human Robotics@PoliTo Istituto Italiano di Tecnologia C.so Trento 21 , 10129 Turin , Italy E-mail: valentina.cauda@iit.it Dr. G. Canavese, Dr. M. Fontana, Prof. C. F. Pirri Department of Applied Science and Technology Politecnico di Torino C.so Duca degli Abruzzi 24 , 10129 Turin , Italy

Evaluation of the piezoelectric properties and voltage generation of flexible zinc oxide thin films

Local piezoresponse and piezoelectric output voltage were evaluated on ZnO thin films deposited by radio-frequency magnetron sputtering on hard Si/Ti/Au and flexible Cu-coated polyimide substrates. Three different thicknesses of ZnO films were studied (285 nm, 710 nm, and 1380 nm), focusing on characteristics like crystallinity, grain size, surface roughness, and morphology. Independent of the nature of the metal layer and the substrate, our results show that thicker films presented a higher level of crystallinity and a preferential orientation along the c-axis direction, as well as a lower density of grain boundaries and larger crystal sizes. The improvement of the crystalline structure of the material directly enhances its piezoelectric properties, as confirmed by the local characterizations performed by piezoresponse force microscopy and by the evaluation of the output voltage generation under the application of a periodical mechanical deformation on the whole film. In particular, the highest value of the d33 coefficient obtained (8 pm V(-1)) and the highest generated output voltage (0.746 V) belong to the thickest films on hard and flexible substrates, respectively. These results envision the use of ZnO thin films--particularly on flexible substrates--as conformable, reliable, and efficient active materials for use in nanosensing, actuation, and piezoelectric nanogenerators.

Toward Plastic Smart Windows: Optimization of Indium Tin Oxide Electrodes for the Synthesis of Electrochromic Devices on Polycarbonate Substrates

Plastic smart windows are becoming one of the key elements in view of the fabrication of inexpensive, lightweight electrochromic (EC) devices to be integrated in the new generation of high-energy-efficiency buildings and automotive applications. However, fabricating electrochromic devices on polymer substrates requires a reduction of process temperature, so in this work we focus on the development of a completely room-temperature deposition process aimed at the preparation of ITO-coated polycarbonate (PC) structures acting as transparent and conductive plastic supports. Without providing any substrate heating or surface activation pretreatments of the polymer, different deposition conditions are used for growing indium tin oxide (ITO) thin films by the radiofrequency magnetron sputtering technique. According to the characterization results, the set of optimal deposition parameters is selected to deposit ITO electrodes having high optical transmittance in the visible range (∼90%) together with low sheet resistance (∼8 ohm/sq). The as-prepared ITO/PC structures are then successfully tested as conductive supports for the fabrication of plastic smart windows. To this purpose, tungsten trioxide thin films are deposited by the reactive sputtering technique on the ITO/PC structures, and the resulting single electrode EC devices are characterized by chronoamperometric experiments and cyclic voltammetry. The fast switching response between colored and bleached states, together with the stability and reversibility of their electrochromic behavior after several cycling tests, are considered to be representative of the high quality of the EC film but especially of the ITO electrode. Indeed, even if no adhesion promoters, additional surface activation pretreatments, or substrate heating were used to promote the mechanical adhesion among the electrode and the PC surface, the observed EC response confirmed that the developed materials can be successfully employed for the fabrication of lightweight and inexpensive plastic EC devices.

Development of a Flexible Lead-Free Piezoelectric Transducer for Health Monitoring in the Space Environment

In this work we report on the fabrication process for the development of a flexible piezopolymeric transducer for health monitoring applications, based on lead-free, piezoelectric zinc oxide (ZnO) thin films. All the selected materials are compatible with the space environment and were deposited by the RF magnetron sputtering technique at room temperature, in view of preserving the total flexibility of the structures, which is an important requirement to guarantee coupling with cylindrical fuel tanks whose integrity we want to monitor. The overall transducer architecture was made of a c-axis-oriented ZnO thin film coupled to a pair of flexible Polyimide foils coated with gold (Au) electrodes. The fabrication process started with the deposition of the bottom electrode on Polyimide foils. The ZnO thin film and the top electrode were then deposited onto the Au/Polyimide substrates. Both the electrodes and ZnO layer were properly patterned by wet-chemical etching and optical lithography. The assembly of the final structure was then obtained by gluing the upper and lower Polyimide foils with an epoxy resin capable of guaranteeing low outgassing levels, as well as adequate thermal and electrical insulation of the transducers. The piezoelectric behavior of the prototypes was confirmed and evaluated by measuring the mechanical displacement induced from the application of an external voltage.

Enhancement of the Upconversion Emission by Visible-to-Near- Infrared Fluorescent Graphene Quantum Dots for miRNA Detection

We developed a sensor for the detection of specific microRNA (miRNA) sequences that was based on graphene quantum dots (GQDs) and ssDNA-UCNP@SiO2. The proposed sensor exploits the interaction between the sp2 carbon atoms of the GQD, mainly π–π stacking, and the DNA nucleobases anchored on the upconversion nanoparticles (UCNPs). This interaction brings the GQD to the surface of the ssDNA-UCNP@SiO2 system, enhancing the upconversion emission. On the other hand, hybridization of the single-stranded DNA (ssDNA) chains anchored on the nanoparticles with their complementary miRNA sequences blocks the capacity of the UCNPs to interact with the GQD through π–π stacking. That gives as result a reduction of the fluorescent enhancement, which is dependent on the concentration of miRNA sequences. This effect was used to create a sensor for miRNA sequences with a detection limit of 10 fM.

Electric Clock for NanoMagnet Logic Circuits

Among Field-Coupled technologies, NanoMagnet Logic (NML) is one of the most promising. Low dynamic power consumption, total absence of static power, remarkable heat and radiations resistance, in association with the possibility of combining memory and logic in the same device, make this technology the ideal candidate for low power, portable applications. However, the necessity of using an external magnetic field to locally control the circuit represents, currently, the weakest point of this technology. The high power losses in the clock generation system adopted up to now wipes out the most important advantages of this technology.

ZnO Nanostructures for Tissue Engineering Applications

This review focuses on the most recent applications of zinc oxide (ZnO) nanostructures for tissue engineering. ZnO is one of the most investigated metal oxides, thanks to its multifunctional properties coupled with the ease of preparing various morphologies, such as nanowires, nanorods, and nanoparticles. Most ZnO applications are based on its semiconducting, catalytic and piezoelectric properties. However, several works have highlighted that ZnO nanostructures may successfully promote the growth, proliferation and differentiation of several cell lines, in combination with the rise of promising antibacterial activities. In particular, osteogenesis and angiogenesis have been effectively demonstrated in numerous cases. Such peculiarities have been observed both for pure nanostructured ZnO scaffolds as well as for three-dimensional ZnO-based hybrid composite scaffolds, fabricated by additive manufacturing technologies. Therefore, all these findings suggest that ZnO nanostructures represent a powerful tool in promoting the acceleration of diverse biological processes, finally leading to the formation of new living tissue useful for organ repair.

Zinc Oxide Thin Films for Memristive Devices: A Review

ASBTRACT Zinc Oxide (ZnO) thin films have been addressed as promising candidates for the fabrication of Resistive Random Access Memory devices, which are alternative to conventional charge-based flash memories. According to the filamentary conducting model and charge trapping/detrapping theory developed in the last decade, the memristive behavior of ZnO thin films is explained in terms of conducting filaments formed by metallic ions and/or oxygen vacancies, and their breaking through electrochemical redox reactions and/or recombination of oxygen vacancies/ions. A comparative review of the memristive properties of ZnO thin films grown by sputtering, atomic layer deposition (ALD), pulsed laser deposition (PLD), and sol-gel methods is here proposed. Sputtered ZnO thin films show promising resistive switching behaviors, showing high on/off ratios (10–104), good endurance, and low operating voltages. ALD is also indicated to be useful for growing conformal ZnO layers with atomic thickness control, resulting in important resistive switching characteristics, such as relatively high on/off ratios and low operating voltages. High insulating epitaxial ZnO thin films can be obtained by PLD, showing reliable switching properties at low voltages and with good retention. On the contrary, the sol-gel approach generally results in ZnO thin films with poor resistive switching behaviors. Nevertheless, thin films derived from ZnO NPs show improved switching performances, with higher on/off ratios and lower operating voltages. Independently of the synthetic approach, doped ZnO thin films exhibit better resistive switching behaviors than pristine ones, coupling a strong increase of the on/off ratio with a more stable switching response.

Functionalized ZnO nanowires for microcantilever biosensors with enhanced binding capability

AbstractAn efficient way to increase the binding capability of microcantilever biosensors is here demonstrated by growing zinc oxide nanowires (ZnO NWs) on their active surface. A comprehensive evaluation of the chemical compatibility of ZnO NWs brought to the definition of an innovative functionalization method able to guarantee the proper immobilization of biomolecules on the nanostructured surface. A noteworthy higher amount of grafted molecules was evidenced with colorimetric assays on ZnO NWs-coated devices, in comparison with functionalized and activated silicon flat samples. ZnO NWs grown on silicon microcantilever arrays and activated with the proposed immobilization strategy enhanced the sensor binding capability (and thus the dynamic range) of nearly 1 order of magnitude, with respect to the commonly employed flat functionalized silicon devices. Graphical AbstractAn efficient way to increase the binding capability of microcantilever biosensors is represented by growing zinc oxide nanowires (ZnO NWs) on their active surface. ZnO NWs grown on silicon microcantilever arrays and activated with an innovative immobilization strategy enhanced the sensor binding capability of nearly 1 order of magnitude, with respect to the commonly employed flat functionalized silicon devices.

Oligonucleotide Sensor Based on Selective Capture of Upconversion Nanoparticles Triggered by Target-Induced DNA Interstrand Ligand Reaction

We present a sensor that exploits the phenomenon of upconversion luminescence to detect the presence of specific sequences of small oligonucleotides such as miRNAs among others. The sensor is based on NaYF4:Yb,Er@SiO2 nanoparticles functionalized with ssDNA that contain azide groups on the 3′ ends. In the presence of a target sequence, interstrand ligation is possible via the click-reaction between one azide of the upconversion probe and a DBCO-ssDNA-biotin probe present in the solution. As a result of this specific and selective process, biotin is covalently attached to the surface of the upconversion nanoparticles. The presence of biotin on the surface of the nanoparticles allows their selective capture on a streptavidin-coated support, giving a luminescent signal proportional to the amount of target strands present in the test samples. With the aim of studying the analytical properties of the sensor, total RNA samples were extracted from healthy mosquitoes and were spiked-in with a specific target sequence at different concentrations. The result of these experiments revealed that the sensor was able to detect 10–17 moles per well (100 fM) of the target sequence in mixtures containing 100 ng of total RNA per well. A similar limit of detection was found for spiked human serum samples, demonstrating the suitability of the sensor for detecting specific sequences of small oligonucleotides under real conditions. In contrast, in the presence of noncomplementary sequences or sequences having mismatches, the luminescent signal was negligible or conspicuously reduced.