Marco Ragazzi

Lower Heating Value Dynamics during Municipal Solid Waste Bio-Drying

In agreement with the new European Union directives concerning the valorization of materials and energy recovery, Municipal Solid Waste (MSW) management is, in general based on an integrated approach characterized by a combination of different treatment processes. The bio-mechanical treatment (BMT) of MSW is an increasing option in Europe either as a pre-treatment before landfilling or as a pre-treatment before combustion. In this context the research on the bio-drying process is not fully developed. In the present paper the Lower Heating Value (LHV) dynamics during MSW bio-drying has been assessed. Measurements were made using a pilot scale bio-dryer that allows the recording of data as air flow, temperature (at the entrance, at the exit and inside the waste), and weight loss. An initial characterization of the MSW completes the input data. Results give information on the dynamics of the main process parameters (humidity, volatile solids, ammonia, Lower Heating Value) and also of additional parameters.

Web-GIS oriented systems viability for municipal solid waste selective collection optimization in developed and transient economies.

Municipal solid waste management is a multidisciplinary activity that includes generation, source separation, storage, collection, transfer and transport, processing and recovery, and, last but not least, disposal. The optimization of waste collection, through source separation, is compulsory where a landfill based management must be overcome. In this paper, a few aspects related to the implementation of a Web-GIS based system are analyzed. This approach is critically analyzed referring to the experience of two Italian case studies and two additional extra-European case studies. The first case is one of the best examples of selective collection optimization in Italy. The obtained efficiency is very high: 80% of waste is source separated for recycling purposes. In the second reference case, the local administration is going to be faced with the optimization of waste collection through Web-GIS oriented technologies for the first time. The starting scenario is far from an optimized management of municipal solid waste. The last two case studies concern pilot experiences in China and Malaysia. Each step of the Web-GIS oriented strategy is comparatively discussed referring to typical scenarios of developed and transient economies. The main result is that transient economies are ready to move toward Web oriented tools for MSW management, but this opportunity is not yet well exploited in the sector.

Treatment and disposal of tyres: two EU approaches. A review

The treatment and disposal of tyres from vehicles has long been of considerable environmental importance. The main problem lies in the mixed composition of the tyres. Studies have been undertaken to modify the structure of the tyres, especially with reference to the percentage of granulated rubber incorporated, in order to improve their performance, and also to reduce their environmental impact during normal functioning (noise, particulates, etc.) and facilitate recycling and final disposal. The aim of the present study is to review and compare how used tyres are treated and disposed of in two different EU countries. The first is Italy, which has been part of the European Union since its inception, and has important industrial traditions. The second is Romania, an emerging country which recently became part of the EU, and whose economic and industrial development has had a major boost in recent years, with a strong growth in waste production, together with consumption in urban areas. The occasion was useful to consider the situation concerning the evolution of the different aspects related to the management of the end-of-life tyres. In particular, the paper considers the properties of tyre waste and their potential reuse, the enhancement of end-of-life tires and the various types of recovery, such as the reconstruction of tyres and the material recovery. The aspects related to the energy recovery and the use of the life cycle analysis, as a tool to support the choices of the best management system, were also taken into consideration, not forgetting that an adequate end-of-life planning is important when developing a sustainable product, since it can affect considerably its overall life cycle.

Selective collection as a pretreatment for indirect solid recovered fuel generation

Effective selective collection (SC) has been increasing in many countries of the European Union. As a consequence the composition of residual municipal solid waste (RMSW) is changing not only because of economic development, but also due to the collection system. The input of RMSW treatment plants is thus not homogeneous. This paper analyses two case studies involving a total of five SC scenarios and their impact on the generation of solid recovered fuel (SRF) with/without bio-drying, post-treatment and packaging take back programs (TBPs). These case studies are based on two types of SC: kerbside and drop-off. The latest regulation on SRF classification is taken into account: energy content, Cl and Hg concentrations are assessed and discussed. The role of the respirometric index (RI) is also analyzed. Results show that when SC is highly efficient RMSW can be classified directly as SRF, but only if the introduction of RI does not set stringent respirometric targets. The role of packaging TBPs is important as the residual waste remaining after the packaging has been processed, can be valorized increasing the lower heating value (LHV) of the residual RMSW and minimizing the streams that should be landfilled. The source separation of food waste has a significant impact on the suitability of bio-drying: when the SC of food waste is very efficient, its percentage in the RMSW may be too low for effective bio-drying.

Management of atmospheric pollutants from waste incineration processes: the case of Bozen:

This article presents the case study of a waste incinerator located in a region rich in natural and environmental resources, and close to the city of Bozen, where there are about 100,000 inhabitants. Local authorities paid special attention to the effect of the plant on human health and the surrounding environment. Indeed, among the measures adopted to control the emissions, in 2003 an automatic sampling system was installed specifically to monitor polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran (PCDD/F) emissions during the complete operation time of the plant. The continuous sampling system was coupled directly to aerosol spectrometers for the determination of fine and ultra-fine particles in the emissions of the plant. The measurement results suggest that the waste incineration plant of Bozen is not a significant source of PCDD/F, or fine and ultra-fine particles. Immission measurements from other monitoring systems confirmed these results.

Trends in the management of residual municipal solid waste

In agreement with European Union directives, the integrated management of municipal solid waste must be developed ensuring a balanced relationship between the streams of selective collection and the one regarding the residual waste. A theoretical scenario is made where the residual municipal solid waste is composed only of non‐recyclable fractions. An important aspect concerns the role of the organic fraction as selective collection can significantly decrease its content in the residual waste. This paper focuses on the planning, design and management consequences of this unsteady scenario. The treatments that are considered are: combustion, gasification, pyrolysis, integrated thermal plants, aerobic mechanical–biological treatments, anaerobic mechanical–biological treatments and other types of treatment. The considerations are based on the experience of the authors not only in terms of development of research but also in terms of transfer of the research results to the real scale, and knowledge of the state‐of‐the‐art of the sector.

Multi-step approach for comparing the local air pollution contributions of conventional and innovative MSW thermo-chemical treatments

In the sector of municipal solid waste management the debate on the performances of conventional and novel thermo-chemical technologies is still relevant. When a plant must be constructed, decision makers often select a technology prior to analyzing the local environmental impact of the available options, as this type of study is generally developed when the design of the plant has been carried out. Additionally, in the literature there is a lack of comparative analyses of the contributions to local air pollution from different technologies. The present study offers a multi-step approach, based on pollutant emission factors and atmospheric dilution coefficients, for a local comparative analysis. With this approach it is possible to check if some assumptions related to the advantages of the novel thermochemical technologies, in terms of local direct impact on air quality, can be applied to municipal solid waste treatment. The selected processes concern combustion, gasification and pyrolysis, alone or in combination. The pollutants considered are both carcinogenic and non-carcinogenic. A case study is presented concerning the location of a plant in an alpine region and its contribution to the local air pollution. Results show that differences among technologies are less than expected. Performances of each technology are discussed in details.

PCDD/F enviromental impact from municipal solid waste bio-drying plant

The present work indentifies some environmental and health impacts of a municipal solid waste bio-drying plant taking into account the PCDD/F release into the atmosphere, its concentration at ground level and its deposition. Four scenarios are presented for the process air treatment and management: biofilter or regenerative thermal oxidation treatment, at two different heights. A Gaussian dispersion model, AERMOD, was used in order to model the dispersion and deposition of the PCDD/F emissions into the atmosphere. Considerations on health risk, from different exposure pathways are presented using an original approach. The case of biofilter at ground level resulted the most critical, depending on the low dispersion of the pollutants. Suggestions on technical solutions for the optimization of the impact are presented.

Material and energy recovery in integrated waste management systems: An innovative approach for the characterization of the gaseous emissions from residual MSW bio-drying

In the sector of residual municipal solid waste management an increasing attention is put towards the role of biological treatments like bio-drying and bio-stabilization in order to decrease the need of landfilling volumes. The literature shows a lack of information concerning the emission factor of pollutants released from these processes. The available data are generally spot characterizations of concentration and air flow-rate that are used together in order to assess the emission factors. This approach caused significant differences among the available data as the release of pollutants is not steady. This paper belongs to a group of six papers concerning a research on material and energy recovery in integrated waste management systems, developed by a network of five universities. The contribution of the University of Trento, focuses on the bio-drying process with the following targets: (a) developing an innovative low cost method of sampling/measurement able to take into account the dynamics of release of pollutants; (b) checking the efficiency of a bio-filter; (c) verifying the variability of generation of some pollutants; (d) generating emission factors. The research was developed using a bio-drying pilot plant. As a treatment of the process air, the bio-reactor was coupled with a bio-filter. The emissions were characterized using an original approach based on the adoption of two measurement chambers suitable for hosting passive samplers. The passive samplers allowed the characterization of VOCs, N(2)O, NH(3) and H(2)S. A bio-chemical model, useful for energy and mass balances, supported the interpretation of the presented bio-drying run.

Bio-drying of grape marc and other biomass: a comparison.

The winery industry produces every year in the world about 270 millions of hectolitres of wine. A consequent amount of grape marc is then generated that has to be somehow treated and processed. For this reason a technique to treat grape marc (bio-drying) was studied and applied at the University of Trento. Grape marc, as is, is not suitable for direct combustion because of its high water content. By bio-drying the lower heating value has been increased up to the limit for a good combustion. This result allows a decentralized management of a grape marc drying differently from the conventional solutions.