Margitta Dathe

Structural features of helical antimicrobial peptides: their potential to modulate activity on model membranes and biological cells.

Antibacterial, membrane-lytic peptides belong to the innate immune system and host defense mechanism of a multitude of animals and plants. The largest group of peptide antibiotics comprises peptides which fold into an amphipathic alpha-helical conformation when interacting with the target. The activity of these peptides is thought to be determined by global structural parameters rather than by the specific amino acid sequence. This review is concerned with the influence of structural parameters, such as peptide helicity, hydrophobicity, hydrophobic moment, peptide charge and the size of the hydrophobic/hydrophilic domain, on membrane activity and selectivity. The potential of these parameters to increase the antibacterial activity and to improve the prokaryotic selectivity of natural and model peptides is assessed. Furthermore, biophysical studies are summarized which elucidated the molecular basis for activity and selectivity modulations on the level of model membranes. Finally, the knowledge about the role of peptide structural parameters is applied to understand the different activity spectra of natural membrane-lytic peptides.

Hydrophobicity, hydrophobic moment and angle subtended by charged residues modulate antibacterial and haemolytic activity of amphipathic helical peptides

© Federation of European Biochemical Societies.

Optimization of the antimicrobial activity of magainin peptides by modification of charge.

Investigation of magainin II amide analogs with cationic charges ranging between +3 and +7 showed that enhancement of the peptide charge up to a threshold value of +5 and conservation of appropriate hydrophobic properties optimized the antimicrobial activity and selectivity. High selectivity was the result of both enhanced antimicrobial and reduced hemolytic activity. Charge increase beyond +5 with retention of other structural motifs led to a dramatic increase of hemolytic activity and loss of antimicrobial selectivity. Selectivity could be restored by reduction of the hydrophobicity of the hydrophobic helix surface (H hd), a structural parameter not previously considered to modulate activity. Dye release experiments with lipid vesicles revealed that the potential of peptide charge to modulate membrane activity is limited: on highly negatively charged 1‐palmitoyl‐2‐oleoylphosphatidyl‐DL‐glycerol bilayers, reinforcement of electrostatic interactions had an activity‐reducing effect. On neutral 1‐palmitoyl‐2‐oleoylphosphatidylcholine bilayers, the high activity was determined by H hd. H hd values above a certain threshold led to effective permeabilization of all lipid systems and even compensated for the activity‐reducing effect of charge increase on highly negatively charged membranes.

Immobilization Reduces the Activity of Surface-Bound Cationic Antimicrobial Peptides with No Influence upon the Activity Spectrum

ABSTRACT Early studies of immobilized peptides mainly focused upon the relationship between structural properties and the activity of soluble and surface-tethered sequences. The intention of this study was to analyze the influence of immobilization parameters upon the activity profile of peptides. Resin beads (TentaGel S NH2, HypoGel 400 NH2, and HypoGel 200 NH2) with polyethylene glycol spacers of different lengths were rendered antimicrobial by linkage of an amphipathic model KLAL peptide and magainin-derived MK5E. Standard solid-phase peptide synthesis, thioalkylation, and ligation strategies were used to immobilize the peptides at the C and N termini and via different side-chain positions. Depending upon the resin capacity and the coupling strategies, peptide loading ranged between 0.1 and 0.25 μmol/mg for C-terminally and around 0.03 μmol/mg for N-terminally and side-chain-immobilized peptides. Tethering conserved the activity spectra of the soluble peptides at reduced concentrations. The resin-bound peptides were antimicrobial toward Escherichia coli and Bacillus subtilis in the millimolar range compared to the results seen with micromolar concentrations of the free peptides. B. subtilis was more susceptible than E. coli. The antimicrobial activity distinctly decreased with reduction of the spacer length. Slight differences in the antimicrobial effect of KLAL and MK5E bound at different chain positions on TentaGel S NH2 suggest that the activity is less dependent upon the position of immobilization. Soluble KLAL was active toward red blood cells, whereas MK5E was nonhemolytic at up to about 400 μM. Resin-induced hemolysis hampered the determination of the hemolytic effect of the immobilized peptides. TentaGel S NH2-bound peptides enhanced the permeability of the POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-choline) and mixed POPC/1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPC/POPG) bilayers used to model the charge properties of the biological targets. The results suggest that surface immobilization of the cationic amphipathic antimicrobial peptides does not influence the membrane-permeabilizing mode of action. Peptide insertion into the target membrane and likely the exchange of membrane-stabilizing bivalent cations contribute to the antimicrobial effect. In conclusion, reasonable antimicrobial activity of surface-bound peptides requires the optimization of the coupling parameters, with the length of the spacer and the amount of target-accessible peptide being the most important factors.

Structural requirements for cellular uptake of α-helical amphipathic peptides

The structure of the cell‐permeable α‐helical amphipathic model peptide FLUOS‐KLALKLALKALKAALKLA‐NH2 (I) was modified stepwise with respect to its helix parameters hydrophobicity, hydrophobic moment and hydrophilic face as well as molecular size and charge. Cellular uptake and membrane destabilizing activity of the resulting peptides were studied using aortic endothelial cells and HPLC combined with CLSM. With the exceptions that a reduction of molecule size below 16 amino acid residues and the introduction of a negative net charge abolished uptake, none of the investigated structural parameters proved to be essential for the passage of these peptides across the plasma membrane. Membrane toxicity also showed no correlation to any of the parameters investigated and could be detected only at concentrations higher than 2 μm. These results implicate helical amphipathicity as the only essential structural requirement for the entry of such peptides into the cell interior, in accord with earlier studies. The pivotal role of helical amphipathicity was confirmed by uptake results obtained with two further pairs of amphipathic/non‐amphipathic 18‐mer peptides with different primary structure, net charge and helix parameters from I. The amphipathic counterparts were internalized into the cells to a comparable extent as I, whereas no cellular uptake could be detected for the non‐amphipathic analogues. The mode of uptake remains unclear and involves both temperature‐sensitive and ‐insensitive processes, indicating non‐endocytic contributions. Copyright

Modulation of membrane activity of amphipathic, antibacterial peptides by slight modifications of the hydrophobic moment

Starting from the sequences of magainin 2 analogs, peptides with slightly increased hydrophobic moment (μ) but retained other structural parameters were designed. Circular dichroism investigations revealed that all peptides adopt an α‐helical conformation when bound to phospholipid vesicles. Analogs with increased μ were considerably more active in permeabilizing vesicles mainly composed of zwitterionic lipid. In addition, the antibacterial and hemolytic activities of these analogs were enhanced. Correlation of permeabilization and binding indicated that the activity increase is predominantly caused by an increased membrane affinity of the peptides due to strengthened hydrophobic interactions.

High-affinity AKAP7δ–protein kinase A interaction yields novel protein kinase A-anchoring disruptor peptides

PKA (protein kinase A) is tethered to subcellular compartments by direct interaction of its regulatory subunits (RI or RII) with AKAPs (A kinase-anchoring proteins). AKAPs preferentially bind RII subunits via their RII-binding domains. RII-binding domains form structurally conserved amphipathic helices with unrelated sequences. Their binding affinities for RII subunits differ greatly within the AKAP family. Amongst the AKAPs that bind RIIalpha subunits with high affinity is AKAP7delta [AKAP18delta; K(d) (equilibrium dissociation constant) value of 31 nM]. An N-terminally truncated AKAP7delta mutant binds RIIalpha subunits with higher affinity than the full-length protein presumably due to loss of an inhibitory region [Henn, Edemir, Stefan, Wiesner, Lorenz, Theilig, Schmidtt, Vossebein, Tamma, Beyermann et al. (2004) J. Biol. Chem. 279, 26654-26665]. In the present study, we demonstrate that peptides (25 amino acid residues) derived from the RII-binding domain of AKAP7delta bind RIIalpha subunits with higher affinity (K(d)=0.4+/-0.3 nM) than either full-length or N-terminally truncated AKAP7delta, or peptides derived from other RII binding domains. The AKAP7delta-derived peptides and stearate-coupled membrane-permeable mutants effectively disrupt AKAP-RII subunit interactions in vitro and in cell-based assays. Thus they are valuable novel tools for studying anchored PKA signalling. Molecular modelling indicated that the high affinity binding of the amphipathic helix, which forms the RII-binding domain of AKAP7delta, with RII subunits involves both the hydrophobic and the hydrophilic faces of the helix. Alanine scanning (25 amino acid peptides, SPOT technology, combined with RII overlay assays) of the RII binding domain revealed that hydrophobic amino acid residues form the backbone of the interaction and that hydrogen bond- and salt-bridge-forming amino acid residues increase the affinity of the interaction.

Peptide induced demixing in PG/PE lipid mixtures: a mechanism for the specificity of antimicrobial peptides towards bacterial membranes?

Antimicrobial peptides attract a lot of interest as potential candidates to overcome bacterial resistance. So far, nearly all the proposed scenarios for their mechanism of action are associated with perforating and breaking down bacterial membranes after a binding process. In this study we obtained additional information on peptide induced demixing of bacterial membranes as a possible mechanism of specificity of antimicrobial peptides. We used DSC and FT-IR to study the influence of a linear and cyclic arginine- and tryptophan-rich antimicrobial peptide having the same sequence (RRWWRF) on the thermotropic phase transitions of lipid membranes. The cyclization of the peptide was found to enhance its antimicrobial activity and selectivity ( Dathe, M. Nikolenko, H. Klose, J. Bienert, M. Biochemistry 43 (2004) 9140-9150). A particular preference of the binding of the peptides to DPPG headgroups compared to other headgroups of negatively charged phospholipids, namely DMPA, DPPS and cardiolipin was observed. The main transition temperature of DPPG bilayers was considerably decreased by the bound peptides. The peptides caused a substantial down-shift of the transition of DPPG/DMPC. In contrast, they induced a demixing in DPPG/DPPE bilayers and led to the appearance of two peaks in the DSC curves indicating a DPPG-peptide-enriched domain and a DPPE-enriched domain. These results could be confirmed by FT-IR-spectroscopic measurements. We therefore propose that the observed peptide-induced lipid demixing in PG/PE-membranes could be a further specific effect of the antimicrobial peptides operating only on bacterial membranes, which contain appreciable amounts of PE and PG, and which could in principle also occur in liquid-crystalline membranes.

Incorporation of an apoE-derived lipopeptide in high-density lipoprotein MRI contrast agents for enhanced imaging of macrophages in atherosclerosis

Magnetic resonance (MR) imaging is becoming a pivotal diagnostic method to identify and characterize vulnerable atherosclerotic plaques. We previously reported a reconstituted high-density lipoprotein (rHDL) nanoparticle platform enriched with Gd-based amphiphiles as a plaque-specific MR imaging contrast agent. Further modification can be accomplished by inserting targeting moieties into this platform to potentially allow for improved intraplaque macrophage uptake. Since studies have indicated that intraplaque macrophage density is directly correlated to plaque vulnerability, modification of the rHDL platform may allow for better detection of vulnerable plaques. In the current study we incorporated a carboxyfluoresceine-labeled apolipoprotein E-derived lipopeptide, P2fA2, into rHDL. The in vitro macrophage uptake and in vivo MR efficacy were demonstrated using murine J774A.1 macrophages and the apolipoprotein E knock-out (apoE(-/-)) mouse model of atherosclerosis. The in vitro studies indicated enhanced association of murine macrophages to P2fA2 enriched rHDL (rHDL-P2A2) nanoparticles, relative to rHDL, using optical techniques and MR imaging. The in vivo studies showed a more pronounced and significantly higher signal enhancement of the atherosclerotic wall 24 h after the 50 micromol Gd/kg injection of rHDL-P2A2 relative to administration of rHDL. The normalized enhancement ratio for atherosclerotic wall of rHDL-P2A2 contrast agent injection was 90%, while that of rHDL was 53% 24 h post-injection. Confocal laser scanning microscopy revealed that rHDL-P2A2 nanoparticles co-localized primarily with intraplaque macrophages. The results of the current study confirm the hypothesis that intraplaque macrophage uptake of rHDL may be enhanced by the incorporation of the P2fA2 peptide into the modified HDL particle.

Cyclic antimicrobial R-, W-rich peptides: the role of peptide structure and E. coli outer and inner membranes in activity and the mode of action

This study compares the effect of cyclic R-, W-rich peptides with variations in amino acid sequences and sizes from 5 to 12 residues upon Gram negative and Gram positive bacteria as well as outer membrane-deficient and LPS mutant Escherichia coli (E.coli) strains to analyze the structural determinants of peptide activity. Cyclo-RRRWFW (c-WFW) was the most active and E.coli-selective sequence and bactericidal at the minimal inhibitory concentration (MIC). Removal of the outer membrane distinctly reduced peptide activity and the complete smooth LPS was required for maximal activity. c-WFW efficiently permeabilised the outer membrane of E.coli and promoted outer membrane substrate transport. Isothermal titration calorimetric studies with lipid A-, rough-LPS (r-LPS)- and smooth-LPS (s-LPS)-doped POPC liposomes demonstrated the decisive role of O-antigen and outer core polysaccharides for peptide binding and partitioning. Peptide activity against the inner E. coli membrane (IM) was very low. Even at a peptide to lipid ratio of 8/1, c-WFW was not able to permeabilise a phosphatidylglycerol/phosphatidylethanolamine (POPG/POPE) bilayer. Low influx of propidium iodide (PI) into bacteria confirmed a low permeabilising ability of c-WFW against PE-rich membranes at the MIC. Whilst the peptide effect upon eukaryotic cells correlated with the amphipathicity and permeabilisation of neutral phosphatidylcholine bilayers, suggesting a membrane disturbing mode of action, membrane permeabilisation does not seem to be the dominating antimicrobial mechanism of c-WFW. Peptide interactions with the LPS sugar moieties certainly modulate the transport across the outer membrane and are the basis of the E. coli selectivity of this type of peptides.