Michael Beyermann

Cellular uptake of an α-helical amphipathic model peptide with the potential to deliver polar compounds into the cell interior non-endocytically

Evidence that multiple, probably non-endocytic mechanisms are involved in the uptake into mammalian cells of the alpha-helical amphipathic model peptide FLUOS-KLALKLALKALKAALKLA-NH2 (I) is presented. Extensive cellular uptake of N-terminally GC-elongated derivatives of I, conjugated by disufide bridges to differently charged peptides, indicated that I-like model peptides might serve as vectors for intracellular delivery of polar bioactive compounds. The mode of the cellular internalization of I comprising energy-, temperature-, pH- and ion-dependent as well as -independent processes suggests analogy to that displayed by small unstructured peptides reported previously (Oehlke et al., Biochim. Biophys. Acta 1330 (1997) 50-60). The uptake behavior of I also showed analogy to that of several protein-derived helical peptide sequences, recently found to be capable of efficiently carrying tagged oligonucleotides and peptides directly into the cytosol of mammalian cells (Derossi et al., J. Biol. Chem. 269 (1994) 10444-10450; Lin et al., J. Biol. Chem. 270 (1995) 14255-14258; Fawell et al., Proc. Natl. Acad. Sci. USA 91 (1994) 664-668; Chaloin et al., Biochemistry 36 (1997) 11179-11187; Vives et al., J. Biol. Chem., 272 (1997) 16010-16017).

Hydrophobicity, hydrophobic moment and angle subtended by charged residues modulate antibacterial and haemolytic activity of amphipathic helical peptides

© Federation of European Biochemical Societies.

Solid-phase peptide synthesis: from standard procedures to the synthesis of difficult sequences

This protocol for solid-phase peptide synthesis (SPPS) is based on the widely used Fmoc/tBu strategy, activation of the carboxyl groups by aminium-derived coupling reagents and use of PEG-modified polystyrene resins. A standard protocol is described, which was successfully applied in our lab for the synthesis of the corticotropin-releasing factor (CRF), >400 CRF analogs and a countless number of other peptides. The 41-mer peptide CRF is obtained within ∼80 working hours. To achieve the so-called difficult sequences, special techniques have to be applied in order to reduce aggregation of the growing peptide chain, which is the main cause of failure for peptide chemosynthesis. Exemplary application of depsipeptide and pseudoproline units is shown for synthesizing an extremely difficult sequence, the Asn(15) analog of the WW domain FBP28, which is impossible to obtain using the standard protocol.

Optimization of the antimicrobial activity of magainin peptides by modification of charge.

Investigation of magainin II amide analogs with cationic charges ranging between +3 and +7 showed that enhancement of the peptide charge up to a threshold value of +5 and conservation of appropriate hydrophobic properties optimized the antimicrobial activity and selectivity. High selectivity was the result of both enhanced antimicrobial and reduced hemolytic activity. Charge increase beyond +5 with retention of other structural motifs led to a dramatic increase of hemolytic activity and loss of antimicrobial selectivity. Selectivity could be restored by reduction of the hydrophobicity of the hydrophobic helix surface (H hd), a structural parameter not previously considered to modulate activity. Dye release experiments with lipid vesicles revealed that the potential of peptide charge to modulate membrane activity is limited: on highly negatively charged 1‐palmitoyl‐2‐oleoylphosphatidyl‐DL‐glycerol bilayers, reinforcement of electrostatic interactions had an activity‐reducing effect. On neutral 1‐palmitoyl‐2‐oleoylphosphatidylcholine bilayers, the high activity was determined by H hd. H hd values above a certain threshold led to effective permeabilization of all lipid systems and even compensated for the activity‐reducing effect of charge increase on highly negatively charged membranes.

Protein Kinase A Anchoring Proteins Are Required for Vasopressin-mediated Translocation of Aquaporin-2 into Cell Membranes of Renal Principal Cells

The antidiuretic hormone arginine-vasopressin (AVP) regulates water reabsorption in renal collecting duct principal cells by inducing a cAMP-dependent translocation of water channels (aquaporin-2, AQP-2) from intracellular vesicles into the apical cell membranes. In subcellular fractions from primary cultured rat inner medullary collecting duct (IMCD) cells, enriched for intracellular AQP-2-bearing vesicles, catalytic protein kinase A (PKA) subunits and several protein kinase A anchoring proteins (AKAPs) were detected. In nonstimulated IMCD cells the majority of AQP-2 staining was detected intracellularly but became mainly localized within the cell membrane after stimulation with AVP or forskolin. Quantitative analysis revealed that preincubation of the cells with the synthetic peptide S-Ht31, which prevents the binding between AKAPs and regulatory subunits of PKA, strongly inhibited AQP-2 translocation in response to forskolin. Preincubation of the cells with the PKA inhibitor H89 prior to forskolin stimulation abolished AQP-2 translocation. In contrast to H89, S-Ht31 did not affect the catalytic activity of PKA. These data demonstrate that not only the activity of PKA, but also its tethering to subcellular compartments, are prerequisites for cAMP-dependent AQP-2 translocation.

Immobilization Reduces the Activity of Surface-Bound Cationic Antimicrobial Peptides with No Influence upon the Activity Spectrum

ABSTRACT Early studies of immobilized peptides mainly focused upon the relationship between structural properties and the activity of soluble and surface-tethered sequences. The intention of this study was to analyze the influence of immobilization parameters upon the activity profile of peptides. Resin beads (TentaGel S NH2, HypoGel 400 NH2, and HypoGel 200 NH2) with polyethylene glycol spacers of different lengths were rendered antimicrobial by linkage of an amphipathic model KLAL peptide and magainin-derived MK5E. Standard solid-phase peptide synthesis, thioalkylation, and ligation strategies were used to immobilize the peptides at the C and N termini and via different side-chain positions. Depending upon the resin capacity and the coupling strategies, peptide loading ranged between 0.1 and 0.25 μmol/mg for C-terminally and around 0.03 μmol/mg for N-terminally and side-chain-immobilized peptides. Tethering conserved the activity spectra of the soluble peptides at reduced concentrations. The resin-bound peptides were antimicrobial toward Escherichia coli and Bacillus subtilis in the millimolar range compared to the results seen with micromolar concentrations of the free peptides. B. subtilis was more susceptible than E. coli. The antimicrobial activity distinctly decreased with reduction of the spacer length. Slight differences in the antimicrobial effect of KLAL and MK5E bound at different chain positions on TentaGel S NH2 suggest that the activity is less dependent upon the position of immobilization. Soluble KLAL was active toward red blood cells, whereas MK5E was nonhemolytic at up to about 400 μM. Resin-induced hemolysis hampered the determination of the hemolytic effect of the immobilized peptides. TentaGel S NH2-bound peptides enhanced the permeability of the POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-choline) and mixed POPC/1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPC/POPG) bilayers used to model the charge properties of the biological targets. The results suggest that surface immobilization of the cationic amphipathic antimicrobial peptides does not influence the membrane-permeabilizing mode of action. Peptide insertion into the target membrane and likely the exchange of membrane-stabilizing bivalent cations contribute to the antimicrobial effect. In conclusion, reasonable antimicrobial activity of surface-bound peptides requires the optimization of the coupling parameters, with the length of the spacer and the amount of target-accessible peptide being the most important factors.

Structural requirements for cellular uptake of α-helical amphipathic peptides

The structure of the cell‐permeable α‐helical amphipathic model peptide FLUOS‐KLALKLALKALKAALKLA‐NH2 (I) was modified stepwise with respect to its helix parameters hydrophobicity, hydrophobic moment and hydrophilic face as well as molecular size and charge. Cellular uptake and membrane destabilizing activity of the resulting peptides were studied using aortic endothelial cells and HPLC combined with CLSM. With the exceptions that a reduction of molecule size below 16 amino acid residues and the introduction of a negative net charge abolished uptake, none of the investigated structural parameters proved to be essential for the passage of these peptides across the plasma membrane. Membrane toxicity also showed no correlation to any of the parameters investigated and could be detected only at concentrations higher than 2 μm. These results implicate helical amphipathicity as the only essential structural requirement for the entry of such peptides into the cell interior, in accord with earlier studies. The pivotal role of helical amphipathicity was confirmed by uptake results obtained with two further pairs of amphipathic/non‐amphipathic 18‐mer peptides with different primary structure, net charge and helix parameters from I. The amphipathic counterparts were internalized into the cells to a comparable extent as I, whereas no cellular uptake could be detected for the non‐amphipathic analogues. The mode of uptake remains unclear and involves both temperature‐sensitive and ‐insensitive processes, indicating non‐endocytic contributions. Copyright

Binding of antibacterial magainin peptides to electrically neutral membranes: thermodynamics and structure.

Magainins are positively charged amphiphatic peptides which permeabilize cell membranes and display antimicrobial activity. They are usually thought to bind specifically to anionic lipids, and binding studies have been performed almost exclusively with negatively charged membranes. Here we demonstrate that binding of magainins to neutral membranes, a reaction which is difficult to assess with spectroscopic means, can be followed with high accuracy using isothermal titration calorimetry. The binding mechanism can be described by a surface partition equilibrium after correcting for electrostatic repulsion by means of the Gouy-Chapman theory. Unusual thermodynamic parameters are observed for the binding process. (i) The three magainin analogues that were investigated bind to neutral membranes with large exothermic reaction enthalpies DeltaH of -15 to -18 kcal/mol (at 30 degrees C). (ii) The reaction enthalpies increase with increasing temperature, leading to a large positive heat capacity DeltaC(p) of approximately 130 cal mol(-)(1) K(-)(1) (at 25 degrees C). (iii) The Gibbs free energies of binding DeltaG are between -6.4 and -8.6 kcal/mol, resulting in a large negative binding entropy DeltaS. The binding of magainin to small unilamellar vesicles is hence an enthalpy-driven reaction. The negative DeltaH and DeltaS and the large positive DeltaC(p) contradict the conventional understanding of the hydrophobic effect. CD experiments reveal that the membrane-bound fraction of magainin is approximately 80% helical at 8 degrees C, decreasing to approximately 60% at 45 degrees C. Since the random coil --> alpha-helix transition in aqueous solution is known to be an exothermic process, the same process occurring at the membrane surface is shown to account for up to 65% of the measured reaction enthalpy. In addition to membrane-facilitated helix formation, the second main driving force for membrane binding is the insertion of the nonpolar amino acid side chains into the lipid bilayer. It also contributes a negative DeltaH and follows the pattern for the nonclassical hydrophobic effect. Addition of cholesterol drastically reduces the extent of peptide binding and reveals an enthalpy-entropy compensation mechanism. Membrane permeability was measured with a dye assay and correlated with the extent of peptide binding. The level of dye efflux is linearly related to the amount of surface-bound peptide and can be traced back to a membrane perturbation effect.

Interaction of glutamic-acid-rich proteins with the cGMP signalling pathway in rod photoreceptors.

The assembly of signalling molecules into macromolecular complexes (transducisomes) provides specificity, sensitivity and speed in intracellular signalling pathways,. Rod photoreceptors in the eye contain an unusual set of glutamic-acid-rich proteins (GARPs) of unknown function. GARPs exist as two soluble forms, GARP1 and GARP2, and as a large cytoplasmic domain (GARP′ part) of the β-subunit of the cyclic GMP-gated channel. Here we identify GARPs as multivalent proteins that interact with the keyplayers of cGMP signalling, phosphodiesterase and guanylate cyclase, and with a retina-specific ATP-binding cassette transporter (ABCR),, through four, short, repetitive sequences. In electron micrographs, GARPs are restricted to the rim region and incisures of discs in close proximity to the guanylate cyclase and ABCR, whereas the phosphodiesterase is randomly distributed. GARP2, the most abundant splice form, associates more strongly with light-activated than with inactive phosphodiesterase, and GARP2 potently inhibits phosphodiesterase activity. Thus, the GARPs organize a dynamic protein complex near the disc rim that may control cGMP turnover and possibly other light-dependent processes. Because there are no similar GARPs in cones, we propose that GARPs may prevent unnecessary cGMP turnover during daylight, when rods are held in saturation by the relatively high light levels.

Identification of a Novel A-kinase Anchoring Protein 18 Isoform and Evidence for Its Role in the Vasopressin-induced Aquaporin-2 Shuttle in Renal Principal Cells

Arginine vasopressin (AVP) increases the water permeability of renal collecting duct principal cells by inducing the fusion of vesicles containing the water channel aquaporin-2 (AQP2) with the plasma membrane (AQP2 shuttle). This event is initiated by activation of vasopressin V2 receptors, followed by an elevation of cAMP and the activation of protein kinase A (PKA). The tethering of PKA to subcellular compartments by protein kinase A anchoring proteins (AKAPs) is a prerequisite for the AQP2 shuttle. During the search for AKAP(s) involved in the shuttle, a new splice variant of AKAP18, AKAP18δ, was identified. AKAP18δ functions as an AKAP in vitro and in vivo. In the kidney, it is mainly expressed in principal cells of the inner medullary collecting duct, closely resembling the distribution of AQP2. It is present in both the soluble and particulate fractions derived from renal inner medullary tissue. Within the particulate fraction, AKAP18δ was identified on the same intracellular vesicles as AQP2 and PKA. AVP not only recruited AQP2, but also AKAP18δ to the plasma membrane. The elevation of cAMP caused the dissociation of AKAP18δ and PKA. The data suggest that AKAP18δ is involved in the AQP2 shuttle.