Maria Antonietta Croce

Inhaled Solid Lipid Microparticles to target alveolar macrophages for tuberculosis.

The goal of the work was to evaluate an anti-tubercular strategy based on breathable Solid Lipid Microparticles (SLM) to target alveolar macrophages and to increase the effectiveness of the conventional tuberculosis (TB) therapy. Rifampicin loaded SLM composed of stearic acid and sodium taurocholate were characterized for aerodynamic diameter, surface charge, physical state of the components, drug loading and release as well as drug biological activity on Bacillus subtilis strain. Moreover, SLM cytotoxicity and cell internalization ability were evaluated on murine macrophages J774 cell lines by MTT test, cytofluorimetry and confocal laser microscopy. SLM exhibited aerodynamic diameter proper to be transported up to the alveolar epithelium, negative charged surface able to promote uptake by the macrophages and preserved drug antimicrobial activity. The negligible in vitro release of rifampicin indicated the capacity of the microparticle matrix to entrap the drug preventing its spreading over the lung fluid. In vitro studies on J774 cell lines demonstrated SLM non-cytotoxicity and ability to be taken up by cell cytoplasm. The microparticulate carrier, showing features suitable for the inhaled therapy and for inducing endocytosis by alveolar macrophages, could be considered promising in a perspective of an efficacious TB inhaled therapy by means of a Dry Powder Inhaler device.

Cell–matrix interactions of in vitro human skin fibroblasts upon addition of hyaluronan

Normal human skin fibroblasts were grown in a three-dimensional collagen gel or in monolayer in the presence or absence of high molecular weight hyaluronan (HA) to assess the influence of extracellular HA on cell-matrix interactions. HA incorporated into the collagen gel or added to the culture medium did not modify lattice retraction with time. The effect was independent from HA molecular weight (from 7.5 x 10(5) to 2.7 x 10(6) Da) and concentration (from 0.1 up to 1 mg/ml). HA did not affect shape and distribution of fibroblasts within the gel, whereas it induced the actin filaments to organise into thicker cables running underneath the plasma membrane. The same phenomenon was observed in fibroblasts grown in monolayer. By contrast, vimentin cytoskeleton and cell-substrate focal adhesions were not modified by exogenous HA. The number of fibroblasts attached to HA-coated dishes was always significantly lower compared to plastic and to collagen type I-coated plates. By contrast, adhesion was not affected by soluble HA added to the medium nor by anti-CD44 and anti-RHAMM-IHABP polyclonals. After 24-h seeding on collagen type I or on plastic, cells were large and spread. Conversely, cells adherent to HA-coated surfaces were long, thin and aligned into rows; alcian blue showed that cells were attached to the plastic in between HA bundles. Therefore, normal human skin fibroblasts exhibit very scarce, if any, adhesion to matrix HA, either soluble or immobilised. Moreover, even at high concentration, HA molecules do not exert any visco-mechanical effect on lattice retraction and do not interfere with fibroblast-collagen interactions nor with focal adhesion contacts of fibroblasts with the substrate. This is probably relevant in organogenesis and wound repair. By contrast, HA greatly modifies the organisation of the actin cytoskeleton, suggesting that CD44-mediated signal transduction by HA may affect cell locomotion and orientation, as indicated by the fusiform shape of fibroblasts grown in the presence of immobilised HA. A role of HA in cell orientation could be relevant for the deposition of collagen fibrils in regeneration and tissue remodelling.

Genome size and ploidy level: New insights for elucidating relationships in Zygosaccharomyces species

Ploidy is a fundamental genetic trait with important physiological and genomic implications. We applied complementary molecular tools to highlight differences in genome size and ploidy between Zygosaccharomyces rouxii strain CBS 732T and other related wild strains (ATCC 42981, ABT 301, and ABT 601). The cell cycle analysis by flow cytometry revealed a genome size of 12.7+/-0.2 Mb for strain CBS 732T, 21.9+/-0.2 Mb for ATCC 42981, 28.1+/-1.3 Mb for ABT 301, and 39.00+/-0.3 Mb for ABT 601. Moreover, karyotyping analysis showed a high variability, with wild strains having a higher number of chromosomal bands than CBS 732T. The ploidy level was assessed comparing genome size from flow cytometry with the average haploid size from electrophoretic karyotyping. Strain CBS 732T showed an haploid DNA content, whereas the wild strains a diploid DNA content. In addition gene probe-chromosome hybridization targeted to ZSOD genes showed that wild strains with a diploid DNA content have two ZSOD copies located on different chromosomes.

Adhesion and Proliferation of Human Dermal Fibroblasts on Collagen Matrix

The purpose of this study was to evaluate adhesion and growth of human dermal fibroblasts on a 0.150 mm-thick matrix of reconstituted collagen isolated from horse tendon. Collagen was extracted and polymerized according to the standard procedures (Opocrin, Corlo, Modena, Italy). By light microscopy, the bottom surface of the matrix appeared linear and compact, whereas the superficial one was indented and less homogeneous. By scanning electron microscopy, the collagen fibrils had different diameters and the great majority of them was oriented parallel to the surface of the gel. By transmission electron microscopy, collagen fibrils showed the typical banding. Human dermal fibroblasts were seeded on the collagen matrix, previously equilibrated in growth medium. Fibroblast proliferation stopped in the second week and was always significantly lower than that of the same cell strain seeded on plastic and cultured in parallel. By light microscopy, after six days culture, cells formed a confluent multilayer on the surface of the gel. By scanning and transmission electron microscopy, fibroblasts appeared flat and adherent to the matrix. Contacts of cells among themselves and with the collagen fibrils were observed. Fibroblasts never moved into the collagen gel. In conclusion, human dermal fibroblasts can be grown in a three-dimensional matrix made by horse tendon that, on the other hand, seems to condition their proliferation rate.

Collagen-based modified membranes for tissue engineering: influence of type and molecular weight of GAGs on cell proliferation.

This study aims to evaluate the effects of the two most widely used glycosaminoglycans (dermatan sulphate and heparin) on both the structural and biological properties of collagen-based modified membranes (COL/GAGs membranes) designed for tissue engineering. The molecular weight of dermatan sulphate and heparins was correlated with the membrane feasibility and the cell (fibroblasts and keratinocytes) ability to adhere and proliferate on the COL/GAG membranes. Microstructure and physico-chemical properties of COL/GAGs membranes were examined using scanning electron microscopy and differential scanning calorimetry; the free amino group content and the swelling properties were also detected. The morphology, proliferation and growth behaviour of keratinocytes and fibroblasts were investigated using microscopical approach and in vitro colorimetric assay. Both fibroblasts and keratinocytes are able to grow and proliferate on COL/dermatan sulphate membranes. Fibroblasts revealed significantly higher proliferation on the membranes prepared with heparin if compared to the proliferation on the membrane without heparin (COL membrane). Particularly, a combination of the membranes formulated adding high molecular weight dermatan sulphate and high molecular weight heparin could be suitable to be used as biomaterials for epidermal substitute.

Construction and in Vitro Functional Evaluation of a Low-Density Lipoprotein Receptor/Transferrin Fusion Protein as a Therapeutic Tool for Familial Hypercholesterolemia

A cDNA sequence encoding a soluble form of the human low-density lipoprotein receptor (LDL-R) was produced by RT-PCR amplification. This form of the receptor contains the N-terminal cysteine-rich domain, the EGF homology domain, and the serine/threonine-rich domain, but lacks the membrane anchor as well as the cytoplasmic domain. By the same technical approach a cDNA sequence encoding rabbit transferrin was generated. In-frame fusion of the two cDNAs produced a sequence encoding a chimeric protein potentially capable of binding LDL on the N-terminal side and the transferrin receptor on the C-terminal side. It was expected that LDL bound to the chimeric protein could be internalized, targeted to an acidic compartment, and processed through the pathway of the transferrin receptor. Cells transfected with the LDL-R/transferrin cDNA translate, glycosylate, and secrete the corresponding protein in the culture medium. The secreted protein binds LDL in a ligand-blotting experiment. Finally, the chimeric protein mediates the binding and internalization of LDL in mutant cells lacking the LDL receptor. In fact, Watanabe rabbit fibroblasts, incubated with the chimeric protein show a fourfold increase in LDL binding, a fivefold increase in LDL internalization, and a sixfold increase in LDL degradation, with respect to unincubated fibroblasts.

17β-estradiol prevents cytotoxicity from hydrophobic bile acids in HepG2 and WRL-68 cell cultures

Background:  Epidemiological and clinical studies suggest the possibility that estrogens might have a cytoprotective effect on the liver. The aim of the present study was to test the hypothesis that 17β‐estradiol (E2) prevents hepatocellular damage induced by deoxycholic acid (DCA), a hydrophobic bile acid.

Surface engineering of Solid Lipid Nanoparticle assemblies by methyl α-d-mannopyranoside for the active targeting to macrophages in anti-tuberculosis inhalation therapy

This study describes the development of new mannosylated Solid Lipid Nanoparticle assemblies (SLNas) delivering rifampicin for an inhaled treatment of tuberculosis. SLNas were surface engineered with mannose residues to recognize mannose receptors located on infected alveolar macrophages and facilitate cell internalization. Two sets of SLNas were produced by the melt emulsifying technique using biocompatible lipid components, i.e. cholesteryl myristate combined with palmitic acid (PA set) or tripalmitin (TP set), in the presence of the targeting moiety, methyl α-d-mannopyranoside. Mannosylated SLNas were examined for their physical properties, drug payloads and release, as well as respirability in terms of emitted dose and respirable fraction determined by Next Generation Impactor. The most appropriate formulations were assessed for mannosylation using FTIR, XPS, SEM coupled with EDX analysis, and wettability assay, in comparison with the respective non-functionalized SLNas. Besides, cytotoxicity and cell internalization ability were established on J774 murine macrophage cell line. Mannosylated SLNas exhibited physical properties suitable for alveolar macrophage passive targeting, adequate rifampicin payloads (10-15%), and feasible drug maintenance within SLNas along the respiratory tract before macrophage internalization. Despite respirability impaired by powder cohesiveness, surface mannosylation provided quicker macrophage phagocytosis, giving evidence of an active targeting promotion.

Biocompatibility of Collagen Membranes Assessed by Culturing Human J111 Macrophage Cells

We have carried out an in vitro study on the interactions of human macrophages (J111 cell line) with different scaffolds made of type I and II collagen, isolated from horse tendon and from horse articular and trachea cartilage, in order to assess growth properties and biocompatibility of these membranes. We have therefore evaluated cell adhesion and proliferation as well as cytokine production considered an indicator of macrophage activation. The inflammatory response is in fact one of the major causes of collagen destruction thus interfering with cell and tissue behaviour. Moreover, the morphology of cells, seeded on membranes selected for the best characteristics, was described. Results might be relevant for in vivo application such ad “tissue engineering” and/or specialized cells implants.