Maria del Carmen Michelini

Gas-Phase Uranyl, Neptunyl, and Plutonyl: Hydration and Oxidation Studied by Experiment and Theory

The following monopositive actinyl ions were produced by electrospray ionization of aqueous solutions of An(VI)O(2)(ClO(4))(2) (An = U, Np, Pu): U(V)O(2)(+), Np(V)O(2)(+), Pu(V)O(2)(+), U(VI)O(2)(OH)(+), and Pu(VI)O(2)(OH)(+); abundances of the actinyl ions reflect the relative stabilities of the An(VI) and An(V) oxidation states. Gas-phase reactions with water in an ion trap revealed that water addition terminates at AnO(2)(+)·(H(2)O)(4) (An = U, Np, Pu) and AnO(2)(OH)(+)·(H(2)O)(3) (An = U, Pu), each with four equatorial ligands. These terminal hydrates evidently correspond to the maximum inner-sphere water coordination in the gas phase, as substantiated by density functional theory (DFT) computations of the hydrate structures and energetics. Measured hydration rates for the AnO(2)(OH)(+) were substantially faster than for the AnO(2)(+), reflecting additional vibrational degrees of freedom in the hydroxide ions for stabilization of hot adducts. Dioxygen addition resulted in UO(2)(+)(O(2))(H(2)O)(n) (n = 2, 3), whereas O(2) addition was not observed for NpO(2)(+) or PuO(2)(+) hydrates. DFT suggests that two-electron three-centered bonds form between UO(2)(+) and O(2), but not between NpO(2)(+) and O(2). As formation of the UO(2)(+)-O(2) bonds formally corresponds to the oxidation of U(V) to U(VI), the absence of this bonding with NpO(2)(+) can be considered a manifestation of the lower relative stability of Np(VI).

Gas-Phase Reactions of the Bare Th2+ and U2+ Ions with Small Alkanes, CH4, C2H6, and C3H8: Experimental and Theoretical Study of Elementary Organoactinide Chemistry

The gas-phase reactions of two dipositive actinide ions, Th(2+) and U(2+), with CH(4), C(2)H(6), and C(3)H(8) were studied by both experiment and theory. Fourier transform ion cyclotron resonance mass spectrometry was employed to study the bimolecular ion-molecule reactions; the potential energy profiles (PEPs) for the reactions, both observed and nonobserved, were computed by density functional theory (DFT). The experiments revealed that Th(2+) reacts with all three alkanes, including CH(4) to produce ThCH(2)(2+), whereas U(2+) reacts with C(2)H(6) and C(3)H(8), with different product distributions than for Th(2+). The comparative reactivities of Th(2+) and U(2+) toward CH(4) are well explained by the computed PEPs. The PEPs for the reactions with C(2)H(6) effectively rationalize the observed reaction products, ThC(2)H(2)(2+) and UC(2)H(4)(2+). For C(3)H(8) several reaction products were experimentally observed; these and additional potential reaction pathways were computed. The DFT results for the reactions with C(3)H(8) are consistent with the observed reactions and the different products observed for Th(2+) and U(2+); however, several exothermic products which emerge from energetically favorable PEPs were not experimentally observed. The comparison between experiment and theory reveals that DFT can effectively exclude unfavorable reaction pathways, due to energetic barriers and/or endothermic products, and can predict energetic differences in similar reaction pathways for different ions. However, and not surprisingly, a simple evaluation of the PEP features is insufficient to reliably exclude energetically favorable pathways. The computed PEPs, which all proceed by insertion, were used to evaluate the relationship between the energetics of the bare Th(2+) and U(2+) ions and the energies for C-H and C-C activation. It was found that the computed energetics for insertion are entirely consistent with the empirical model which relates insertion efficiency to the energy needed to promote the An(2+) ion from its ground state to a prepared divalent state with two non-5f valence electrons (6d(2)) suitable for bond formation in C-An(2+)-H and C-An(2+)-C activated intermediates.

A combined theoretical and experimental study on the oxidation of fulvic acid by the sulfate radical anion

The kinetics of the reaction of sulfate radicals with the IHSS Waskish peat fulvic acid in water was investigated in the temperature range from 289.2 to 305.2 K. The proposed mechanism considers the reversible binding of the sulfate radicals by the fulvic acid. The kinetic analysis of the data allows the determination of the thermodynamic parameters DeltaG degrees = -10.2 kcal mol(-1), DeltaH degrees = -16 kcal mol(-1) and DeltaS degrees = -20.3 cal K(-1) mol(-1) for the reversible association at 298.2 K. Theoretical (DFT) calculations performed with the Buffle model of the fulvic acids support the formation of H-bonded adducts between the inorganic radicals and the humic substances. The experimental enthalpy change compares well with the theoretical values found for some of the investigated adducts.

Topological analysis of the reaction of uranium ions (U+, U2+) with N2O in the gas phase.

Density functional theory calculations were performed to study the ability of uranium cations, U(+) and U(2+), to activate the N-N and N-O bonds of N(2)O. A close description of the reaction pathways leading to different reaction products is presented. The obtained results are compared with previous experimental works. The nature of the bonding of all the involved species and the bonding evolution along the reaction pathways was studied by means of the topological analysis of the ELF function.

Gas-Phase Reactions of Uranate Ions, UO2-, UO3-, UO4-, and UO4H-, with Methanol: a Convergence of Experiment and Theory

Bimolecular reactions of uranium oxide molecular anions with methanol have been studied experimentally, by Fourier transform ion cyclotron resonance mass spectrometry, and computationally, by density functional theory (DFT). The primary goals were to provide fundamental insights into mechanistic and structural details of model reactions of uranium oxides with organics, and to examine the validity of theoretical modeling of these types of reactions. The ions UO(3)(-), UO(4)(-), and UO(4)H(-) each reacted with methanol to give a singular product; the primary products each exhibited sequential reactions with two additional methanol molecules to again give singular products. The observed reactions were elimination of water, formaldehyde, or hydrogen, and in one case addition of a methanol molecule. The potential energy profiles were computed for each reaction, and isotopic labeling experiments were performed to probe the validity of the computed mechanisms and structures-in each case where the experiments could be compared with the theory there was concurrence, clearly establishing the efficacy of the employed DFT methodologies for these and related reaction systems. The DFT results were furthermore in accord with the surprisingly inert nature of UO(2)(-). The results provide a basis to understand mechanisms of key reactions of uranium oxides with organics, and a foundation to extend DFT methodologies to more complex actinide systems which are not amenable to such direct experimental studies.

Mechanistic aspects of the reaction of Th+ and Th2+ with water in the gas phase.

Density functional theory calculations were performed to study the gas-phase reaction of Th(+) and Th(2+) with water. An in-depth analysis of the reaction pathways leading to different reaction products is presented. The obtained results are compared to experimental data and to the previously studied reactions of U cations with water.

Energetic and topological analyses of the oxidation reaction between Mon (n = 1, 2) and N2O

The interaction between molybdenum, atom, and dimer, with nitrous oxide has been investigated using density functional theory. The analysis of the potential energy surfaces for both reactions has revealed that a single molybdenum atom can activate the NO bond of N2O requiring a small activation energy. However, the presence of several intersystem crossings between three different spin states, namely, septet, quintet and triplet states, seems to be the major constraint to the Mo + N2O reaction. Contrarily, the low‐lying excited states (triplet and quintet) do not participate in the reaction between the molybdenum dimer and N2O. The latter reaction fully evolves on the singlet spin surface. Three different regions have been distinguished along the pathway: formation of an adduct complex, formation of an inserted compound, and the N2 detachment. The connection between the two first regions has been characterized by the formation of a special complex in which the NO bond is so weakened that it could be considered as a first step in the insertion process. It has been shown that the topological changes along the pathways provide a clear explanation for the geometrical changes that occur along the reaction pathway. In summary, the detachment of the N2 molecule is found to be kinetically an effective process for both reactions, owing to the high exothermicity and consequently to the high internal energy of the insertion intermediates. However, in the case of Mo atom, the reaction should be a slow process due to the presence of spin‐forbidden transitions. These results fully agree with previous experimental works.

Activation of ethane C-H and C-C bonds by gas phase Th+ and U+: a theoretical study.

Two different approaches of density functional theory were used to analyze the C-H and C-C bond activation mechanisms during the reaction of bare Th(+) and U(+) ions with ethane. We report a complete exploration of the potential energy surfaces taking into consideration different spin states. According to B3LYP/SDD computations the double dehydrogenation of C(2)H(6) is thermodynamically favorable only in the case of Th(+). It is shown that the overall C-H and C-C bond activation processes are exothermic in the case of Th(+) and endothermic for U(+). In both cases, the C-C insertion transition state barrier exceeds the energy of the ground state reactants, preventing the observation of these species under thermal conditions.

The electronic states of Fe2

Abstract The equilibrium bond lengths, harmonic vibrational frequencies, ionization energies and dissociation energies of the iron dimer and its cation were determined by hybrid density functional theory calculations supplemented by single point calculations using coupled cluster theory. Calculations predict correctly the 9 Σ g − state as the ground state of Fe 2 . The ionization and dissociation energies have been found to compare satisfactorily with the experimental values. The ground state of Fe 2 + is found to be 10 Σ g − , corresponding to the 3d 12 4s 3 valence electronic configuration. However, it is worth mentioning that the 8 Σ u + state (3d 13 4s 2 ) is calculated to lie only 0.14 eV higher in energy.

Formation of Bare UO22+ and NUO+ by Fragmentation of Gas-Phase Uranyl–Acetonitrile Complexes

In a prior study [Van Stipdonk; et al. J. Phys. Chem. A 2006, 110, 959-970], electrospray ionization (ESI) was used to generate doubly charged complex ions composed of the uranyl ion and acetonitrile (acn) ligands. The complexes, general formula [UO2(acn)n](2+), n = 0-5, were isolated in an 3-D quadrupole ion-trap mass spectrometer to probe intrinsic reactions with H2O. Two general reaction pathways were observed: (a) the direct addition of one or more H2O ligands to the doubly charged complexes and (b) charge-exchange reactions. For the former, the intrinsic tendency to add H2O was dependent on the number and type of nitrile ligand. For the latter, charge exchange involved primarily the formation of uranyl hydroxide, [UO2OH](+), presumably via a collision with gas-phase H2O and the elimination of a protonated nitrile ligand. Examination of general ion fragmentation patterns by collision-induced dissociation, however, was hindered by the pronounced tendency to generate hydrated species. In an update to this story, we have revisited the fragmentation of uranyl-acetonitrile complexes in a linear ion-trap (LIT) mass spectrometer. Lower partial pressures of adventitious H2O in the LIT (compared to the 3-D ion trap used in our previous study) minimized adduct formation and allowed access to lower uranyl coordination numbers than previously possible. We have now been able to investigate the fragmentation behavior of these complex ions completely, with a focus on tendency to undergo ligand elimination versus charge reduction reactions. CID can be used to drive ligand elimination to completion to furnish the bare uranyl dication, UO2(2+). In addition, fragmentation of [UO2(acn)](2+) generated [UO2(NC)](+), which subsequently fragmented to furnish NUO(+). Formation of the nitrido by transfer of N from cyanide was confirmed using precursors labeled with (15)N. The observed formation of [UO2(NC)](+) and NUO(+) was modeled by density functional theory.