Maria Giovanna Martinotti

Microbial biosurfactants production, applications and future potential

Microorganisms synthesise a wide range of surface-active compounds (SAC), generally called biosurfactants. These compounds are mainly classified according to their molecular weight, physico-chemical properties and mode of action. The low-molecular-weight SACs or biosurfactants reduce the surface tension at the air/water interfaces and the interfacial tension at oil/water interfaces, whereas the high-molecular-weight SACs, also called bioemulsifiers, are more effective in stabilising oil-in-water emulsions. Biosurfactants are attracting much interest due to their potential advantages over their synthetic counterparts in many fields spanning environmental, food, biomedical, and other industrial applications. Their large-scale application and production, however, are currently limited by the high cost of production and by limited understanding of their interactions with cells and with the abiotic environment. In this paper, we review the current knowledge and the latest advances in biosurfactant applications and the biotechnological strategies being developed for improving production processes and future potential.

Impact of two fluorescent pseudomonads and an arbuscular mycorrhizal fungus on tomato plant growth, root architecture and P acquisition

The ability of fluorescent pseudomonads and arbuscular mycorrhizal fungi (AMF) to promote plant growth is well documented but knowledge of the impact of pseudomonad-mycorrhiza mixed inocula on root architecture is scanty. In the present work, growth and root architecture of tomato plants (Lycopersicon esculentum Mill. cv. Guadalete), inoculated or not with Pseudomonas fluorescens 92rk and P190r and/or the AMF Glomus mosseae BEG12, were evaluated by measuring shoot and root fresh weight and by analysing morphometric parameters of the root system. The influence of the microorganisms on phosphorus (P) acquisition was assayed as total P accumulated in leaves of plants inoculated or not with the three microorganisms. The two bacterial strains and the AMF, alone or in combination, promoted plant growth. P. fluorescens 92rk and G. mosseae BEG12 when co-inoculated had a synergistic effect on root fresh weight. Moreover, co-inoculation of the three microorganisms synergistically increased plant growth compared with singly inoculated plants. Both the fluorescent pseudomonads and the myco-symbiont, depending on the inoculum combination, strongly affected root architecture. P. fluorescens 92rk increased mycorrhizal colonization, suggesting that this strain is a mycorrhization helper bacterium. Finally, the bacterial strains and the AMF, alone or in combination, improved plant mineral nutrition by increasing leaf P content. These results support the potential use of fluorescent pseudomonads and AMF as mixed inoculants for tomato and suggest that improved tomato growth could be related to the increase in P acquisition.

LC/ESI-MS/MS characterisation of lipopeptide biosurfactants produced by the Bacillus licheniformis V9T14 strain

Lipopeptide biosurfactants produced by the Bacillus licheniformis V9T14 strain showed an interesting anti-adhesion activity against biofilm formation of human pathogenic bacterial strains. The chemical characterisation of the crude extract of V9T14 strain was first developed through electrospray ionisation mass spectrometry (ESI-MS) and ESI-MS/MS direct infusions: two sets of molecular ion species belonging to the fengycin and surfactin families were revealed and their structures defined, interpreting their product ion spectra. The LC/ESI-MS analysis of the crude extract allowed to separate in different chromatogram ranges the homologues and the isoforms of the two lipopeptide families. The extract was then fractionated by silica gel chromatography in two main fractions, I and II. The purified biosurfactants were analysed through a new, rapid and suitable LC/ESI-MS/MS method, which allowed characterising the composition and the structures of the produced lipopeptides. LC/ESI-MS/MS analysis of fraction I showed the presence of C(13), C(14) and C(15) surfactin homologues, whose structures were confirmed by the product ion spectra of the sodiated molecules [M + Na](+) at m/z 1030, 1044 and 1058. LC/ESI-MS/MS analysis of fraction II confirmed the presence of two main fengycin isoforms, with the protonated molecules [M + H](+) at m/z 1478 and 1506 corresponding to C(17) fengycin A and C(17) fengycin B, respectively. Other homologues (C(14) to C(16)) were revealed and confirmed as belonging to fengycin A or B according to the retention times and the product ions generated, although with the same nominal mass. Finally, a relative percentage content of each homologue for both lipopeptides families in the whole extract was proposed.

The assessment of airborne bacterial contamination in three composting plants revealed site-related biological hazard and seasonal variations.

Aims:  The purpose of this study was to evaluate the degree of bacterial contamination generated by three Italian composting plants (1, 2 and 3) in two different seasons and to assess the health risk for the employees.

Synergistic effect of lipopeptide biosurfactant with antibiotics against Escherichia coli CFT073 biofilm

Biofilms are microcolonies of microbes adherent to biotic and abiotic surfaces, often responsible for chronic infections and medical device contamination. Escherichia coli is one of the prevalent pathogens involved in uropathogenic infections and contamination of catheters. A biosurfactant produced by Bacillus licheniformis V9T14 was tested alone and in association with various antibiotics against a mature 24-h uropathogenic E. coli CFT073 biofilm. Biofilm was grown on polystyrene pegs of a Calgary Biofilm Device, providing a tool to evaluate the efficacy of antimicrobial agents. Antibiotics tested were ampicillin, cefazolin, ceftriaxone, ciprofloxacin, piperacillin, tobramycin and trimethoprim/sulfamethoxazole (19:1). Biosurfactant alone at the concentrations tested was not able to remove the adherent cells of the pre-formed biofilm. However, the difference between the effect of antibiotic alone and in combination with the biosurfactant was significant and exceeded 1log(10) (90%) reduction in most cases. Results of this study indicate that V9T14 biosurfactant in association with antibiotics leads to a synergistic increase in the efficacy of antibiotics in biofilm killing, and in some combinations leads to total eradication of E. coli CFT073 biofilm.

Biosurfactants prevent in vitro Candida albicans biofilm formation on resins and silicon materials for prosthetic devices

OBJECTIVE The aim of this study was to evaluate in vitro the preventive antiadhesion activity of biosurfactants against Candida albicans biofilm. STUDY DESIGN Disks of silicon and acrylic resin for denture prostheses were precoated with increasing concentrations of biosurfactants obtained from endophyte biofilms selected from Robinia pseudoacacia and from Nerium oleander, and afterward infected with C. albicans cells. The number of biofilm cells were detected by colony-forming unit (CFU) counting, cell viability was established by the 2,3-bis(2-methoxy-4-nitro-5-sulphophenyl)-5-[(phenyl amino)carbonyl]-2H-tetrazolium hydroxide (XTT) assay, and biosurfactant cytotoxicity was evaluated by the [3-(4,5-dimethyliazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulphophenyl)-2H-tetrazolium] (MTT) assay. Chlorhexidine was used as control. RESULTS Precoating with biosurfactants caused a greater reduction (P < .01) in biofilm cell number and viability than chlorhexidine. The antiadhesion activity of the biosurfactants was observed at low concentrations (78.12 μg/mL and 156.12 μg/mL) which were noncytotoxic. CONCLUSIONS This study demonstrated the preventive antiadhesion activity of biosurfactants against C. albicans biofilm. These agents are amphiphilic, interfere with microbial adhesion, and demonstrate cycompatibility with epithelial cells and fibroblasts.