Marja Välimäki

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

Inline printing and coating methods have been demonstrated to enable a high technical yield of fully roll-to-roll processed polymer tandem solar cell modules. We demonstrate generality by employing different material sets and also describe how the ink systems must be carefully co-developed in order to reach the ambitious objective of a fully printed and coated 14-layer flexible tandem solar cell stack. The roll-to-roll methodologies involved are flexographic printing, rotary screen printing, slot-die coating, X-ray scattering, electrical testing and UV-lamination. Their combination enables the manufacture of completely functional devices in exceptionally high yields. Critical to the ink and process development is a carefully chosen technology transfer to industry method where first a roll coater is employed enabling contactless stack build up, followed by a small roll-to-roll coater fitted to an X-ray machine enabling in situ studies of wet ink deposition and drying mechanisms, ultimately elucidating how a robust inline processed recombination layer is key to a high technical yield. Finally, the transfer to full roll-to-roll processing is demonstrated.

Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture

We present a cost analysis based on state of the art printing and coating processes to fully encapsulated, flexible ITO- and vacuum-free polymer solar cell modules. Manufacturing data for both single junctions and tandem junctions are presented and analyzed. Within this calculation the most expensive layers and processing steps are identified. Based on large roll-to-roll coating experiments the exact material consumptions were determined. In addition to the data for the pilot scale experiment presented here, projections to medium and large scale scenarios serve as a guide to achieve cost targets of 5 €ct per Wp in a detailed material and cost analysis. These scenarios include the replacement of cost intensive layers, as well as process optimization steps. Furthermore, the cost structures for single and tandem devices are listed in detail and discussed. In an optimized model the material costs drop below 10 € per m2 which proves that OPV is a competitive alternative to established power generation technologies.

Processing and reliability of bare die LED chip bonding on flexible plastic substrate

Printed hybrid electronics combining traditional semiconductor devices and polymer substrates allows augmenting the performance of printed electronics. In this work, chip bonding on plastic substrate, i.e. chip on flex (COF), using anisotropically conductive adhesive and LED chips was investigated. Unpackaged semiconductor chips were bonded to PET foil with printed silver conductors. The yield and reliability of the bonding and the effect of several bonding parameters were studied. The experiments were done using automatic equipment to manufacture LED ribbons. Reliability of the ribbons was investigated by subjecting them to temperature and humidity of 85 °C and 85 % respectively and by bending tests. It was found that with correct choice of manufacturing parameters, it is possible to attain 100 % yield and the samples produced with optimal parameters can withstand the 85/85 environment for period over 100 days. Furthermore, samples produced this way are not damaged by bending them around cylinders with radiuses of 20 mm and 15 mm, for 10 000 and 27 000 cycles respectively. The good tolerance for bending can mostly be attributed to the small size of the chips.

Effect of the Electron Transport Layer on the Interfacial Energy Barriers and Lifetime of R2R Printed Organic Solar Cell Modules

Understanding the phenomena at interfaces is crucial for producing efficient and stable flexible organic solar cell modules. Minimized energy barriers enable efficient charge transfer, and good adhesion allows mechanical and environmental stability and thus increased lifetime. We utilize here the inverted organic solar module stack and standard photoactive materials (a blend of poly(3-hexylthiophene) and [6,6]-phenyl C61 butyric acid methyl ester) to study the interfaces in a pilot scale large-area roll-to-roll (R2R) process. The results show that the adhesion and work function of the zinc oxide nanoparticle based electron transport layer can be controlled in the R2R process, which allows optimization of performance and lifetime. Plasma treatment of zinc oxide (ZnO) nanoparticles and encapsulation-induced oxygen trapping will increase the absolute value of the ZnO work function, resulting in energy barriers and an S-shaped IV curve. However, light soaking will decrease the zinc oxide work function close to the original value and the S-shape can be recovered, leading to power conversion efficiencies above 3%. We present also an electrical simulation, which supports the results. Finally, we study the effect of plasma treatment in more detail and show that we can effectively remove the organic ligands around the ZnO nanoparticles from the printed layer in a R2R process, resulting in increased adhesion. This postprinting plasma treatment increases the lifetime of the R2R printed modules significantly with modules retaining 80% of their efficiency for ∼3000 h in accelerated conditions. Without plasma treatment, this efficiency level is reached in less than 1000 h.