Marja Vilkman

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

Inline printing and coating methods have been demonstrated to enable a high technical yield of fully roll-to-roll processed polymer tandem solar cell modules. We demonstrate generality by employing different material sets and also describe how the ink systems must be carefully co-developed in order to reach the ambitious objective of a fully printed and coated 14-layer flexible tandem solar cell stack. The roll-to-roll methodologies involved are flexographic printing, rotary screen printing, slot-die coating, X-ray scattering, electrical testing and UV-lamination. Their combination enables the manufacture of completely functional devices in exceptionally high yields. Critical to the ink and process development is a carefully chosen technology transfer to industry method where first a roll coater is employed enabling contactless stack build up, followed by a small roll-to-roll coater fitted to an X-ray machine enabling in situ studies of wet ink deposition and drying mechanisms, ultimately elucidating how a robust inline processed recombination layer is key to a high technical yield. Finally, the transfer to full roll-to-roll processing is demonstrated.

Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture

We present a cost analysis based on state of the art printing and coating processes to fully encapsulated, flexible ITO- and vacuum-free polymer solar cell modules. Manufacturing data for both single junctions and tandem junctions are presented and analyzed. Within this calculation the most expensive layers and processing steps are identified. Based on large roll-to-roll coating experiments the exact material consumptions were determined. In addition to the data for the pilot scale experiment presented here, projections to medium and large scale scenarios serve as a guide to achieve cost targets of 5 €ct per Wp in a detailed material and cost analysis. These scenarios include the replacement of cost intensive layers, as well as process optimization steps. Furthermore, the cost structures for single and tandem devices are listed in detail and discussed. In an optimized model the material costs drop below 10 € per m2 which proves that OPV is a competitive alternative to established power generation technologies.

Substrate-facilitated nanoparticle sintering and component interconnection procedure

Room temperature substrate-facilitated sintering of nanoparticles is demonstrated using commercially available silver nanoparticle ink and inkjet printing substrates. The sintering mechanism is based on the chemical removal of the nanoparticle stabilizing ligand and is shown to provide conductivity above one-fourth that of bulk silver. A novel approach to attach discrete components to printed conductors is presented, where the sintered silver provides the metallic interconnects with good electrical and mechanical properties. A process for printing and chip-on-demand assembly is suggested.

Roll-to-roll method for producing polyaniline patterns on paper

High speed reel-to-reel manufacturing of electrically conductive polyaniline-dodecylbenzenesulfonic acid (PANI-DBSA) patterns directly onto paper substrate were investigated. A printing speed upto 100 meters per minute and line width down to 60 μm with a 60 cm wide paper web with a industrial scale pilot gravure printer was demonstrated. Additional measurements were made with printability tester using the conducting ink which consist of a PANI-DBSA in toluene solution. We illustrate what influence the concentration of the ink, printing speed and pressure at printing nip have on the conductivity of printed patterns.

Effect of the Electron Transport Layer on the Interfacial Energy Barriers and Lifetime of R2R Printed Organic Solar Cell Modules

Understanding the phenomena at interfaces is crucial for producing efficient and stable flexible organic solar cell modules. Minimized energy barriers enable efficient charge transfer, and good adhesion allows mechanical and environmental stability and thus increased lifetime. We utilize here the inverted organic solar module stack and standard photoactive materials (a blend of poly(3-hexylthiophene) and [6,6]-phenyl C61 butyric acid methyl ester) to study the interfaces in a pilot scale large-area roll-to-roll (R2R) process. The results show that the adhesion and work function of the zinc oxide nanoparticle based electron transport layer can be controlled in the R2R process, which allows optimization of performance and lifetime. Plasma treatment of zinc oxide (ZnO) nanoparticles and encapsulation-induced oxygen trapping will increase the absolute value of the ZnO work function, resulting in energy barriers and an S-shaped IV curve. However, light soaking will decrease the zinc oxide work function close to the original value and the S-shape can be recovered, leading to power conversion efficiencies above 3%. We present also an electrical simulation, which supports the results. Finally, we study the effect of plasma treatment in more detail and show that we can effectively remove the organic ligands around the ZnO nanoparticles from the printed layer in a R2R process, resulting in increased adhesion. This postprinting plasma treatment increases the lifetime of the R2R printed modules significantly with modules retaining 80% of their efficiency for ∼3000 h in accelerated conditions. Without plasma treatment, this efficiency level is reached in less than 1000 h.