Marjam Karlsson Ott

Potential use of mucins as biomaterial coatings. II. Mucin coatings affect the conformation and neutrophil‐activating properties of adsorbed host proteins—Toward a mucosal mimic

In continuation of our recent fractionation and characterization study on mucins of bovine salivary (BSM), porcine gastric (PGM), and human salivary (MG1) origin, this study evaluates the effect of mucin precoating on the conformation and neutrophil-activating properties of host proteins adsorbed to a polyethylene terephthalate-based model biomaterial. Microscopy combined with assays for the neutrophil releases of reactive oxygen species and human neutrophil lipocalin showed that mucin precoating greatly reduced the strong immune-response normally induced by adsorbed immunoglobulin G (IgG) and secretory immunoglobulin A (sIgA), respectively. A similar finding was made for the proinflammatory fibrinogen. Although the total uptakes of these proteins depended on the mucin surface concentration, a detailed composite analysis suggested the fraction of surface-exposed protein to be a stronger determinant of coating performance. The unexpectedly low neutrophil activation showed by composites containing near-monolayer concentrations of exposed IgG and sIgA, respectively, suggested that these act synergistically with mucin on the surface. In support of this hypothesis, quartz crystal microbalance with dissipation monitoring measurements revealed that a preadsorbed BSM layer stabilizes IgG through complexation on a polymeric model surface. Our findings link well to the complex in vivo situation and suggest that functional mucosal mimics can be created in situ for improved biomaterials performance.

Multifunctional Antioxidants : Regenerable Radical-Trapping and Hydroperoxide-Decomposing Ebselenols

Regenerable, multifunctional ebselenol antioxidants were prepared that could quench peroxyl radicals more efficiently than α-tocopherol. These compounds act as better mimics of the glutathione peroxidase enzymes than ebselen. Production of reactive oxygen species (ROS) and reactive nitrogen species (RNS) in human mononuclear cells was considerably decreased upon exposure to the organoselenium compounds. At a concentration of 25 μm, the ebselenol derivatives showed minimal toxicity in pre-osteoblast MC3T3 cells.

Nanoporesize affects complement activation

In the present study, we have shown the vast importance of biomaterial nanotexture when evaluating inflammatory response. For the first time in an in vitro whole blood system, we have proven that a small increase in nanoporesize, specifically 180 nm (from 20 to 200 nm), has a huge effect on the complement system. The study was done using nanoporous aluminiumoxide, a material that previously has been evaluated for potential implant use, showing good biocompatibility. This material can easily be manufactured with different pore sizes making it an excellent candidate to govern specific protein and cellular events at the tissue-material interface. We performed whole blood studies, looking at complement activation after blood contact with two pore size alumina membranes (pore diameters, 20 and 200 nm). The fluid phase was analyzed for complement soluble components, C3a and sC5b-9. In addition, surface adsorbed proteins were eluted and dot blots were performed to detect IgG, IgM, C1q, and C3. All results point to the fact that 200 nm pore size membranes are more complement activating. Significantly, higher values of complement soluble components were found after whole blood contact with 200 nm alumina and all studied proteins adsorbed more readily to this membrane than to the 20 nm pore size membrane. We hypothesize that the difference in complement activation between our two test materials is caused by the type and the amount of adsorbed proteins, as well as their conformation and orientation. The different protein patterns created on the two alumina membranes are most likely a consequence of the material topography.

Interactions between human neutrophils and mucin-coated surfaces

Recently, we showed microscopically that bovine (BSM), porcine (PGM) and human (MG1) mucin coatings could suppress the adhesion of neutrophils to a polyethylene terephthalate-based model biomaterial (Thermanox). Here, using the release of reactive oxygen species (ROS) as a marker of material-induced neutrophil activation, the strong surface-passivating effects of these mucin coatings were corroborated. Under optimal adsorption conditions, all mucin species performed equally well, thus indicating a high degree of functional homology between the mucins. Cell adhesion and morphology correlated well with the release of ROS. Quartz crystal microbalance (QCM-D) analysis linked low neutrophil activation to efficient mucin surface-shielding. Interestingly, the shielding power appeared equal for thick expanded and thin compact mucin coatings. Combined mucin-serum coatings were found to be highly surface-passivating. Particularly, since our data suggested partly synergistic mucin-serum action, we highlight the possibility that pre-adsorbed mucins could provide favorable support for adsorbing host components.

Sustained release of simvastatin from premixed injectable calcium phosphate cement

Locally applied simvastatin is known to promote bone regeneration; however, the lack of suitable delivery systems has restricted its clinical use. In this study we demonstrate for the first time the use of premixed acidic calcium phosphate cement (CPC) as a delivery system for water-solubilized simvastatin. Freeze-dried simvastatin β-hydroxy acid (SVA) was added to the premixed cement paste in four different doses (1, 0.5, 0.25, and 0 mg SVA/g cement). The addition of the drug did not alter the cement setting time (38 min), compression strength (5.54 MPa), or diametral tensile strength (2.62 MPa). In a release study conducted in phosphate buffered saline at 37°C, a diffusion-controlled release was observed for over a week. Furthermore, the osteogenic effect of the released SVA was demonstrated in vitro. Cell proliferation, alkaline phosphatase activity, and mineralization were assayed after incubation with cement extracts. The lower doses of SVA (0.5 and 0.25 mg SVA/g cement) showed an approximately fourfold increase in mineralization as compared to the control. In conclusion, our findings suggest that premixed acidic CPC is a good option for local delivery of SVA, due to its ability of slowly releasing the drug, leading to a prolonged stimulation of osteogenesis.

Nanoporosity of Alumina Surfaces Induces Different Patterns of Activation in Adhering Monocytes/Macrophages

The present study shows that alumina nanotopography affects monocyte/macrophage behavior. Human mononuclear cells cultured on alumina membranes with pore diameters of 20 and 200 nm were evaluated in terms of cell adhesion, viability, morphology, and release of proinflammatory cytokines. After 24 hours, cell adhesion was assessed by means of light microscopy and cell viability by measuring LDH release. The inflammatory response was evaluated by quantifying interleukin-1β and tumour necrosis factor-α. Finally, scanning electron microscopy was used to study cell morphology. Results showed pronounced differences in cell number, morphology, and cytokine release depending on the nanoporosity. Few but highly activated cells were found on the 200 nm porous alumina, while relatively larger number of cells were found on the 20 nm porous surface. However, despite their larger number, the cells adhering on the 20 nm surface exhibited reduced pro-inflammatory activity. The data of this paper implies that nanotopography could be exploited for controlling the inflammatory response to implants.

In vivo and in vitro evaluation of hydroxyapatite nanoparticle morphology on the acute inflammatory response

Biomedical implants have been widely used in bone repair applications. However, nanosized degradation products from these implants could elicit an inflammatory reaction, which may lead to implant failure. It is well known that the size, chemistry, and charge of these nanoparticles can modulate this response, but little is known regarding the role that the particles morphology plays in inducing inflammation. The present study aims to investigate the effect of hydroxyapatite nanoparticle (HANPs) morphology on inflammation, in-vitro and in-vivo. Four distinct HANP morphologies were fabricated and characterized: long rods, dots, sheets, and fibers. Primary human polymorphonuclear cells (PMNCs), mononuclear cells (MNCs), and human dermal fibroblasts (hDFs) were exposed to HANPs and alterations in cell viability, morphology, apoptotic activity, and reactive oxygen species (ROS) production were evaluated, in vitro. PMNCs and hDFs experienced a 2-fold decrease in viability following exposure to fibers, while MNC viability decreased 5-fold after treatment with the dots. Additionally, the fibers stimulated an elevated ROS response in both PMNCs and MNCs, and the largest apoptotic behavior for all cell types. Furthermore, exposure to fibers and dots resulted in greater capsule thickness when implanted subcutaneously in mice. Collectively, these results suggest that nanoparticle morphology can significantly impact the inflammatory response.

The influence of Sr content in calcium phosphate coatings

In this study calcium phosphate coatings with different amounts of strontium (Sr) were prepared using a biomineralization method. The incorporation of Sr changed the composition and morphology of coatings from plate-like to sphere-like morphology. Dissolution testing indicated that the solubility of the coatings increased with increased Sr concentration. Evaluation of extracts (with Sr concentrations ranging from 0 to 2.37 μg/mL) from the HA, 0.06Sr, 0.6Sr, and 1.2Sr coatings during in vitro cell cultures showed that Sr incorporation into coatings significantly enhanced the ALP activity in comparison to cells treated with control and HA eluted media. These findings show that calcium phosphate coatings could promote osteogenic differentiation even in a low amount of strontium.

Time sequence of blood activation by nanoporous alumina: Studies on platelets and complement system.

In the present work, the time sequence of blood activation by alumina membranes with different porosities (20 and 200 nm in diameter) was studied. The membranes were incubated with whole blood from 2 min to 4 h. Platelet adhesion and activation in addition to complement activation was monitored at different time points. Evaluation of platelet adhesion and activation was done by determining the change in platelet number and the levels of thrombospondin‐1 (TSP‐1) in the fluid phase. Scanning electron microscopy studies were done to further evaluate platelet adhesion and morphology. Immunocytochemical staining was used to evaluate the presence of CD41 and CD62P antigens on the material surface. Complement activation was monitored by measuring C3a and sC5b‐9 in plasma samples by means of enzyme immunoassays. Both alumina membranes displayed similar complement activation time profiles, with levels of C3a and sC5b‐9 increasing with incubation time. A statistically significant difference between the membranes was found after 60 min of incubation. Platelet activation characteristics and time profile were different between the two membranes. Platelet adhesion increased over time for the 20 nm surface, while the clusters of microparticles on the 200 nm surface did not appreciably change during the course of the experiment. The release of TSP‐1 increased with time for both membranes; however, much later for the 200 nm alumina (240 min) as compared to the 20 nm membrane (60 min). The surface topography of the alumina most probably influence protein transition rate, which in turn affects material platelet activation kinetics. Microsc. Res. Tech. 73:1101–1109, 2010.

Effect of a Bromo Substituent on the Glutathione Peroxidase Activity of a Pyridoxine-like Diselenide

In search for better mimics of the glutathione peroxidase enzymes, pyridoxine-like diselenides 6 and 11, carrying a 6-bromo substituent, were prepared. Reaction of 2,6-dibromo-3-pyridinol 5 with sodium diselenide provided 6 via aromatic nucleophilic substitution of the 2-bromo substituent. LiAlH4 caused reduction of all four ester groups and returned 11 after acidic workup. The X-ray structure of 6 showed that the dipyridyl diselenide moiety was kept in an almost planar, transoid conformation. According to NBO-analysis, this was due to weak intramolecular Se···O (1.1 kcal/mol) and Se···N-interactions (2.5 kcal/mol). That the 6-bromo substituent increased the positive charge on selenium was confirmed by NPA-analysis and seen in calculated and observed (77)Se NMR-shifts. Diselenide 6 showed a more than 3-fold higher reactivity than the corresponding des-bromo compound 3a and ebselen when evaluated in the coupled reductase assay. Experiments followed for longer time (2 h) confirmed that diselenide 6 is a better GPx-catalyst than 11. On the basis of (77)Se-NMR experiments, a catalytic mechanism for diselenide 6 was proposed involving selenol, selenosulfide and seleninic acid intermediates. At low concentration (10 μM) where it showed only minimal toxicity, it could scavenge ROS produced by MNC- and PMNC-cells more efficiently than Trolox.