Natalia Ferraz

Translational study between structure and biological response of nanocellulose from wood and green algae

The influence of nanostructure on the cytocompatibility of cellulose films is analyzed providing insight into how physicochemical properties of surface modified microfibrillated cellulose (MFC) and Cladophora nanocellulose (CC) affect the materials cytocompatibility. CC is modified through TEMPO-mediated oxidation and glycidyltrimethylammonium chloride (EPTMAC) condensation to obtain anionic and cationic nanocellulose samples respectively, while anionic and cationic MFC samples are obtained by carboxymethylation and EPTMAC condensation respectively. Films of unmodified, anionic and cationic MFC and CC are prepared by vacuum filtration and characterized in terms of specific surface area, pore size distribution, degree of crystallinity, surface charge and water content. Human dermal fibroblasts are exposed to culture medium extracts of the films in an indirect contact cytotoxicity test. Moreover, cell adhesion and viability are evaluated in a direct contact assay and the effects of the physicochemical properties on cell behavior are discussed. In the indirect cytotoxicity test no toxic leachables are detected, evidencing that the CC and MFC materials are non-cytotoxic, independently of the chemical treatment that they have been subjected to. The direct contact tests show that carboxymethylated-MFC presents a more cytocompatible profile than unmodified and trimethylammonium-MFC. TEMPO–CC promotes fibroblast adhesion and presents cell viability comparable to the results obtained with the tissue culture material Thermanox. We hypothesize that the distinct aligned nanofiber structure present in the TEMPO–CC films is responsible for the improved cell adhesion. Thus, by controlling the surface properties of cellulose nanofibers, such as chemistry, charge, and orientation, cell adhesion properties can be promoted.

In vitro and in vivo toxicity of rinsed and aged nanocellulose–polypyrrole composites

Novel composites of nanocellulose and the conducting polymer polypyrrole (PPy) are herein suggested as potential candidates for active ion-extraction membranes in electrochemically controlled hemodialysis. This study has defined processing parameters to obtain a biocompatible nanocellulose-PPy composite, and for the first time, the effect of the composite aging on cell viability has been studied. The influence of rinsing and extraction process steps, as well as aging under different conditions (i.e. in air, at -20°C and in argon), on the electroactivity and cytotoxicity of a PPy-nanocellulose composite has been investigated. The biocompatibility evaluation was based on indirect toxicity assays with fibroblasts and monocyte cell lines and an acute toxicity test in mice, while the electroactivity was evaluated by cyclic voltammetry experiments. The as-prepared composite did not induce any cytotoxic response in vitro or in vivo. Extensive rinsing and 48 h incubation in biological buffer previous to the preparation of the culture medium extracts were, however, necessary to obtain a noncytotoxic composite. The as-prepared composite was also found to exhibit acceptable electrochemical performance, which was retained upon 4 weeks storage in argon atmosphere. It was shown that aging of the composite had a negative effect on biocompatibility, regardless of the storage condition. Thus, to allow for longtime storage of electroactive nanocellulose-PPy hemodialysis membranes, the degradation of PPy upon storage must be controlled. The present results show that the biocompatibility of PPy composites depends on the rinsing and pretreatment of the composite material as well as the aging of the material.

Haemocompatibility and ion exchange capability of nanocellulose polypyrrole membranes intended for blood purification

Composites of nanocellulose and the conductive polymer polypyrrole (PPy) are presented as candidates for a new generation of haemodialysis membranes. The composites may combine active ion exchange with passive ultrafiltration, and the large surface area (about 80 m2 g−1) could potentially provide compact dialysers. Herein, the haemocompatibility of the novel membranes and the feasibility of effectively removing small uraemic toxins by potential-controlled ion exchange were studied. The thrombogenic properties of the composites were improved by applying a stable heparin coating. In terms of platelet adhesion and thrombin generation, the composites were comparable with haemocompatible polymer polysulphone, and regarding complement activation, the composites were more biocompatible than commercially available membranes. It was possible to extract phosphate and oxalate ions from solutions with physiological pH and the same tonicity as that of the blood. The exchange capacity of the materials was found to be 600 ± 26 and 706 ± 31 μmol g−1 in a 0.1 M solution (pH 7.4) and in an isotonic solution of phosphate, respectively. The corresponding values with oxalate were 523 ± 5 in a 0.1 M solution (pH 7.4) and 610 ± 1 μmol g−1 in an isotonic solution. The heparinized PPy–cellulose composite is consequently a promising haemodialysis material, with respect to both potential-controlled extraction of small uraemic toxins and haemocompatibility.

Nanoporesize affects complement activation

In the present study, we have shown the vast importance of biomaterial nanotexture when evaluating inflammatory response. For the first time in an in vitro whole blood system, we have proven that a small increase in nanoporesize, specifically 180 nm (from 20 to 200 nm), has a huge effect on the complement system. The study was done using nanoporous aluminiumoxide, a material that previously has been evaluated for potential implant use, showing good biocompatibility. This material can easily be manufactured with different pore sizes making it an excellent candidate to govern specific protein and cellular events at the tissue-material interface. We performed whole blood studies, looking at complement activation after blood contact with two pore size alumina membranes (pore diameters, 20 and 200 nm). The fluid phase was analyzed for complement soluble components, C3a and sC5b-9. In addition, surface adsorbed proteins were eluted and dot blots were performed to detect IgG, IgM, C1q, and C3. All results point to the fact that 200 nm pore size membranes are more complement activating. Significantly, higher values of complement soluble components were found after whole blood contact with 200 nm alumina and all studied proteins adsorbed more readily to this membrane than to the 20 nm pore size membrane. We hypothesize that the difference in complement activation between our two test materials is caused by the type and the amount of adsorbed proteins, as well as their conformation and orientation. The different protein patterns created on the two alumina membranes are most likely a consequence of the material topography.

Surface Chemistry of Nanocellulose Fibers Directs Monocyte/Macrophage Response

The effect of surface functionalization of nanofibrillated cellulose (NFC) on monocyte/macrophage (MM) behavior is investigated to understand how the physicochemical properties of nanocelluloses influence the interactions of such materials with biological systems. Films of anionic (a-), cationic (c-), and unmodified (u-) NFC were synthesized and characterized in terms of surface charge. THP-1 monocytes were cultured on the surface of the films for 24 h in the presence and absence of lipopolysaccharide, and the cell response was evaluated in terms of cell adhesion, morphology, and secretion of TNF-α, IL-10, and IL-1ra. The results show that MMs cultured on carboxymethylated-NFC films (a-NFC) are activated toward a proinflammatory phenotype, whereas u-NFC promotes a mild activation of the studied cells. The presence of hydroxypropyltrimethylammonium groups on c-NFC, however, does not promote the activation of MMs, indicating that c-NFC closely behaves as an inert material in terms of MM activation. None of the materials is able to directly activate the MMs toward an anti-inflammatory response. These results may provide a foundation for the design of future NFC-based materials with the ability to control MM activation and may expand the use of NFC in biomedical applications.

Nanoporosity of Alumina Surfaces Induces Different Patterns of Activation in Adhering Monocytes/Macrophages

The present study shows that alumina nanotopography affects monocyte/macrophage behavior. Human mononuclear cells cultured on alumina membranes with pore diameters of 20 and 200 nm were evaluated in terms of cell adhesion, viability, morphology, and release of proinflammatory cytokines. After 24 hours, cell adhesion was assessed by means of light microscopy and cell viability by measuring LDH release. The inflammatory response was evaluated by quantifying interleukin-1β and tumour necrosis factor-α. Finally, scanning electron microscopy was used to study cell morphology. Results showed pronounced differences in cell number, morphology, and cytokine release depending on the nanoporosity. Few but highly activated cells were found on the 200 nm porous alumina, while relatively larger number of cells were found on the 20 nm porous surface. However, despite their larger number, the cells adhering on the 20 nm surface exhibited reduced pro-inflammatory activity. The data of this paper implies that nanotopography could be exploited for controlling the inflammatory response to implants.

In vitro biological responses to nanofibrillated cellulose by human dermal, lung and immune cells: surface chemistry aspect

BackgroundNanocellulose, and particularly nanofibrillated cellulose (NFC), has been proposed for a diversity of applications in industry and in the biomedical field. Its unique physicochemical and structural features distinguish nanocellulose from traditional materials and enable its use as an advance nanomaterial. However, its nanoscale features may induce unknown biological responses. Limited studies with NFC are available and the biological impacts of its use have not been thoroughly explored. This study assesses the in vitro biological responses elicited by wood-derived NFC gels, when human dermal fibroblasts, lung MRC-5 cells and THP-1 macrophage cells are exposed to the nanomaterial. Furthermore, whether the presence of surface charged groups (i.e. carboxymethyl and hydroxypropyltrimethylammonium groups) on NFC can induce distinct biological responses is investigated.ResultsThe introduction of surface charged groups resulted in individual nanofibrils, while fibril aggregates predominated in the unmodified NFC gel suspensions as observed by transmission electron microscopy. In the presence of proteins, the surface modified NFCs formed compact agglomerates while the agglomeration pattern of the unmodified NFC was similar in the presence of proteins and in physiological buffer. Unmodified and modified NFC gels did not induce cytotoxicity in human dermal fibroblasts, lung and macrophage cells. No significant ROS production by THP-1 macrophages was found and no cellular uptake was observed. However, an inflammatory response was detected when THP-1 macrophages were treated with unmodified NFC as assessed by an increase in TNF-α and IL1-β levels, an effect that was absent when surface charged groups were introduced into NFC.ConclusionsTaken together, the data presented here show the absence of cytotoxic effects associated with the exposure to unmodified, carboxymethylated and hydroxypropyltrimethylammonium-modified NFCs. Unmodified NFC presented a pro-inflammatory effect which can be further moderated by introducing surface modifications such as carboxymethyl and hydroxypropyltrimethylammonium groups into the nanofibrils. The present findings suggest that the inflammatory response to NFC might be driven by the material surface chemistry, and thus open up for the possibility of designing safe nanocellulose materials.

Time sequence of blood activation by nanoporous alumina: Studies on platelets and complement system.

In the present work, the time sequence of blood activation by alumina membranes with different porosities (20 and 200 nm in diameter) was studied. The membranes were incubated with whole blood from 2 min to 4 h. Platelet adhesion and activation in addition to complement activation was monitored at different time points. Evaluation of platelet adhesion and activation was done by determining the change in platelet number and the levels of thrombospondin‐1 (TSP‐1) in the fluid phase. Scanning electron microscopy studies were done to further evaluate platelet adhesion and morphology. Immunocytochemical staining was used to evaluate the presence of CD41 and CD62P antigens on the material surface. Complement activation was monitored by measuring C3a and sC5b‐9 in plasma samples by means of enzyme immunoassays. Both alumina membranes displayed similar complement activation time profiles, with levels of C3a and sC5b‐9 increasing with incubation time. A statistically significant difference between the membranes was found after 60 min of incubation. Platelet activation characteristics and time profile were different between the two membranes. Platelet adhesion increased over time for the 20 nm surface, while the clusters of microparticles on the 200 nm surface did not appreciably change during the course of the experiment. The release of TSP‐1 increased with time for both membranes; however, much later for the 200 nm alumina (240 min) as compared to the 20 nm membrane (60 min). The surface topography of the alumina most probably influence protein transition rate, which in turn affects material platelet activation kinetics. Microsc. Res. Tech. 73:1101–1109, 2010.

On the use of ion-crosslinked nanocellulose hydrogels for wound healing solutions: Physicochemical properties and application-oriented biocompatibility studies

Calcium ion-crosslinked nanofibrillated cellulose (NFC) hydrogels were investigated as potential materials for wound healing dressings. The physicochemical properties of the hydrogels were examined by rheology and water retention tests. Skin cells and monocytes were selected for application-oriented biocompatibility studies. The NFC hydrogels presented entangled fibrous networks and solid-like behavior. Water retention tests showed the material´s potential to maintain a suitable moist environment for different type of wounds. The hydrogels did not affect dermal fibroblasts monolayer cultures upon direct contact, as cell monolayers remained intact after application, incubation and removal of the materials. Inflammatory response studies with blood-derived mononuclear cells revealed the inert nature of the hydrogels in terms of cytokine secretion and reactive oxygen species production. Results highlight the great potential of ion-crosslinked NFC hydrogels for the development of advanced wound dressings, where further functionalization of the material could lead to improved properties towards the healing of specific wound types.

Is there a future for electrochemically assisted hemodialysis? Focus on the application of polypyrrole-nanocellulose composites.

This work summarizes the various aspects of using electrochemically assisted solute removal techniques in hemodialysis with a focus on blood electrodialysis and electrochemically controlled uremic retention solute removal using polypyrrole. In particular, the feasibility of using highly porous conductive polypyrrole-Cladophora cellulose membranes for hemodialysis are overviewed as a part of our dedicated research efforts during the past 4 years. The potential benefits and the current limitations associated with using the electrochemically controlled uremic retention solute removal techniques are discussed in detail.