Mark C. Reilly

The effect of sacral fracture malreduction on the safe placement of iliosacral screws.

Objectives To determine the effects of cranial displacement on the safe placement of iliosacral screws for zone II sacral fractures. Design Computer imaging and dimensional analysis of a human cadaveric sacral fracture model. Setting Cadaveric dissection, Orthopaedic Research Laboratories, Newark, New Jersey. Main Outcome Measurements Six cadaveric pelves with simulated zone II sacral fractures were imaged with computed tomography at controlled cranial displacements of 5, 10, 15, and 20 mm. The area of contact at the fracture site and volume of bone available for iliosacral screw placement was graphically measured using both two- and three-dimensional computer modeling. Areas of contact were also represented in terms of the maximal number of 7.0-mm screws that could be simultaneously implanted. Results Cross-sectional contact area was decreased by 30%, 56%, 81%, and 90% at 5, 10, 15 and 20 mm of displacement, respectively. Volume of bone was decreased by 21%, 25%, 26%, and 34% for 5, 10, 15 and 20 mm of displacement, respectively. In 50% of the specimens at 15 mm and 66% of the specimens with 20 mm displacement, two iliosacral screws could not be contained simultaneously within bone. In 17% of the specimens displaced 15 mm and 50% of the specimens displaced 20 mm, the cross-sectional area was insufficient to contain a single iliosacral screw. Conclusions Although previous authors have accepted up to 15 mm of cranial displacement, the data demonstrate substantial compromise of available screw space with displacements greater than 1 cm. Fracture reduction is mandatory, as screw placement with residual displacement of 10 mm or more can endanger adjacent neural and vascular structures.

Percutaneous methods of tibial plateau fixation.

Various methods of percutaneous fixation of tibial plateau fractures are available. The optimal method of fixation is dictated by soft tissue injury, fracture characteristics, and functional demands of the patient. Unicondylar fractures are amenable to percutaneous stabilization with screws or plates although some fractures are best approached with open techniques. Hybrid and ring external fixators are most appropriate for patients with bicondylar injuries who have severe soft tissue trauma. Use of intramedullary nails to align ipsilateral shaft fractures adjacent to percutaneously fixed plateau injuries remains controversial but may be indicated for some patients with bicondylar lesions and combined plateau and shaft fractures.

Neurologic injuries in pelvic ring fractures.

Unstable fractures of the pelvic ring are an increasingly frequent outcome of motor vehicle trauma. Neurologic injury after such injuries can be a cause of significant morbidity. The available literature on neurologic injuries was reviewed and compared with a clinical review of 90 unstable pelvic injuries treated during a 3-year period. Eighty-three patients were available for followup examination. Neurologic injuries were seen in 21 % of the patients. Thirty-seven percent of patients had sensory deficits alone whereas the remaining 63% had motor and sensory findings. All patients showed some evidence of neurologic recovery at an average or 24-months followup. At least 1 grade of muscle function improvement was consistently seen and 53% of patients had complete neurologic recovery. Improvement in function was seen as many as 24 months postinjury, but L5 function was least likely to progress to full recovery. The incidence of neurologic injuries and their distribution was similar to that reported in the literature, whereas the prognosis for neurologic recovery was significantly better. This may be related to techniques of early anatomic reduction and stabilization of unstable pelvic ring injuries.

Neurovascular and tendinous damage with placement of anteroposterior distal locking bolts in the tibia.

Objective To determine the proximity of anteroposterior locking bolts inserted into the distal metaphyseal tibia to nearby neural, vascular, and tendinous structures. Design A cadaver study. Setting University trauma center. Methods Sixteen legs (8 matched pairs) were nailed in either neutral (Group 1) or 10° of internal rotation (Group 2) and locked using one anteroposterior bolt. The anterior tibial and extensor hallucis longus tendons and neurovascular bundle were identified, and their respective locations in relation to the bolt head were measured. Average distances were calculated for each structure in each group and statistically compared. Damage to any structure was noted at final dissection. Results Average distances from the bolt head to the neurovascular bundle, extensor hallucis longus, and anterior tibial tendons were 0.6, 0.5, and 1.6 mm, respectively, for Group 1 and 1.0, 1.5, and 1.8 mm, respectively, for Group 2 legs. Statistical comparison of distances for each anatomic entity for the two groups revealed no detectable significant differences (P = 0.7, 0.4, 0.7, respectively). For all specimens, the rate of nerve, artery, extensor hallucis longus, and anterior tibial tendon injury was 25%, 19%, 0%, and 6%, respectively. However, the incidence of at least one structure damage in Group 1 legs was 63% versus 12% in Group 2 specimens (P = 0.2). Conclusion Anteroposterior distal tibial locking bolts lie in close proximity to the neurovascular bundle. With standard percutaneous techniques, these structures can be damaged. Although 10° of internal rotation does not statistically affect the measured distance of the locking bolt to the neurovascular bundle, it appears to decrease the incidence of neurovascular injury. This difference may best be explained by the necessary path the drill bit must take through the soft tissues to reach the underlying bone. Regardless of nail orientation, larger incisions with careful dissection and clear visualization of the anatomy are recommended to help prevent this complication.

OTA highlight paper predicting future displacement of nonoperatively managed lateral compression sacral fractures: can it be done?

Purpose: This study was designed to assess the rate of displacement in nondisplaced sacral fractures and to determine if certain fracture patterns are more prone to future displacement. Design: Retrospective. Setting: Two Level I trauma centers. Patients: Patients consisted of those sustaining a lateral compression pelvic fracture whose age was 17 years or older, had less than 5 mm of initial sacral displacement, were the result of a high-energy mechanism, and had radiographs documenting bony union. Intervention: By protocol, patients meeting these criteria were mobilized and maintenance of alignment was documented by serial radiographs. Results: All fractures were classified according to the Orthopaedic Trauma Association classification system, the Young and Burgess mechanistic classification system, and to the location of the sacral fracture as described by Denis. In addition, sacral fractures were classified as complete or incomplete. Additionally, the number and location of rami fractures were recorded. Of the initial 117 fractures, 23 were determined to displace and largely consisted of a single fracture pattern. Fractures consisting of a complete sacral fracture combined with bilateral rami fractures displaced at a rate of 68% (15 of 22). In contrast, incomplete sacral fractures with an ipsilateral rami injury had no displaced unions. Conclusion: Incomplete lateral compression sacral fractures that are associated with ipsilateral rami fractures can be treated nonoperatively and are unlikely to displace. In contrast, those with a complete sacral fracture and bilateral rami fractures displace at a significantly greater rate.

Anteroinferior 2.7-mm versus 3.5-mm plating for AO/OTA type B clavicle fractures: a comparative cohort clinical outcomes study.

Objectives: To compare the Disability of the Arm, Shoulder, and Hand (DASH) and Constant scores, time to union, rate of union, patient cosmetic satisfaction rate, and the need for secondary procedures between 2.7- and 3.5-mm anteroinferior plating for Arbeitsgemeinschaft für Osteosynthesefragen (AO)/Orthopaedic Trauma Association (OTA) type B clavicle fractures. Design: Retrospective, comparative cohort clinical outcomes study. Setting: Level I university trauma center. Patients/Participation: Thirty-seven patients with an AO/OTA type B clavicle fracture who underwent open reduction internal fixation with either a 2.7- or 3.5-mm reconstruction plate placed in the anterior–inferior position. The main outcome comparisons included DASH score, Constant score, time to union, rate of union, rate of hardware failure, cosmetic satisfaction, and secondary procedure. Main Outcome Measurement: DASH score, constant score, time to union, rate of union, cosmetic satisfaction, secondary procedure. Results: At 1-year follow-up, analysis yielded no significant differences in DASH scores (P = 0.26) and Constant Shoulder scores (P = 0.79) between the 2 cohorts. There were no statistically significant differences in the time to union (P = 0.86) and the rate of union (P = 0.49). Although the 2.7-mm cohort had a lower reoperation rate, it was not statistically significant (P = 0.11). However, the 2.7-mm cohort did demonstrate a significantly higher rate of cosmetically acceptable reconstruction (P = 0.003). Conclusions: Compared with 3.5-mm anterior–inferior plating, 2.7-mm anteroinferior plating for AO/OTA type B clavicle fractures leads to significantly higher rates of cosmetic acceptability while reducing the need for a secondary procedure and achieving excellent clinical outcomes as measured by the DASH and Constant scores. There were no differences between the 2.7 and 3.5 cohorts in time to union or in union rate. Level of Evidence: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Femoral version of the general population: does "normal" vary by gender or ethnicity?

Objective: The purpose of this study was to compare various gender and ethnic groups to characterize differences in baseline version and rates of retroversion. Design: Retrospective. Setting: Level 1 trauma center. Patients/Participants: Between 2000 and 2009, 417 consecutive patients with femur fractures were treated with an intramedullary nail at level I trauma and tertiary referral center. Of these, 328 with computed tomography scanogram of the normal, uninjured contralateral femur were included in this study. Main Outcome Measurements: Femoral version. Results: The mean alignment for the all patients was 8.84 ± 9.66° of anteversion. There were no statistically significant differences in mean version between African American, white, and Hispanic patients for males or females. Although there were also no significant differences in rates between ethnicities, retroversion was found to be common in white males (21.4%), African American males (15.1%), and all groups of females (>14.3%). Furthermore, nearly 6% of both African American males and females exhibited >10° retroversion. Conclusions: Although there may not be a significant difference in average femoral version between ethnic and gender groups, retroversion is relatively common, and retroversion >10° was observed in nearly 6% of the African American population. This may have important implications in proper alignment restoration and successful clinical outcomes after intramedullary nailing of femur fractures.

External Fixation of the Femur: Basic Concepts

Summary This article discusses the application of femoral external fixators, with emphasis on the cross sectional anatomy, mechanical considerations, and fixator configurations. Safe, unsafe, and hazardous corridors are described, with recommendations for optimal and ideal pin placement. Fixator configurations and the biomechanics are touched upon, with suggestions for difficult clinical situations such as osteopenic bone, small fracture fragments, and heavy patients.

The Use of an Algorithm for Classifying Acetabular Fractures: A Role for Resident Education?

BackgroundThe Letournel and Judet classification system is commonly used for classifying acetabular fractures. However, for orthopaedic surgeons with less experience with these fractures, correct classification can be more difficult. A stepwise approach has been suggested to enhance the inexperienced observer’s ability to properly classify acetabular fractures, but it is unclear whether this actually improves one’s ability.Questions/purposesWe asked (1) whether the use of a step-by-step algorithm improves residents’ ability to classify acetabular fractures, (2) whether resident experience influenced ability to correctly classify acetabular fractures, and (3) which acetabular fractures were the most difficult to classify?MethodsForty-six residents reviewed 15 sets of plain radiographs of 10 acetabular fracture patterns. Residents used the Letournel and Judet classification with only a diagram for reference. Three weeks later they were asked to classify the fractures a second time with the use of the algorithm. We then compared the number of correct responses from the two sessions and determined whether resident experience and use of the algorithm influenced correct classification.ResultsWe found an improvement in the number of correctly classified fractures between the first (348/690 [50%]) and second (409/690 [59%]) sessions. Thirty-two of 46 participants improved their score with the use of the algorithm. There was a tendency for participants with more residency training to correctly classify the fractures.ConclusionsThe algorithm provided modest improvement to the residents’ ability to classify acetabular fractures. This or other such algorithms could provide residents with a basic tool to better evaluate standard radiographs and classify acetabular fractures.

Inadvertent Reduction of Symphyseal Diastasis During Computed Tomography.

Objective: To determine the quantifiable difference in pubic symphysis diastasis when comparing computed tomography (CT) and pelvic radiographs in individuals with anterior pelvic ring injuries. Design: Retrospective chart and radiographic review. Setting: Level 1 trauma center. Patients/Participants: Between 2002 and 2013, all individuals requiring internal fixation of the anterior pelvic ring were reviewed. Of the 163 patients, 72 met the inclusion criteria. Patients with a symphysis dislocation were included if the pelvic radiograph and CT were performed without a pelvic binder, and imaging was adequate for required measurements. Intervention: Symphyseal diastasis was measured on the initial pelvic radiograph, the CT scout, and axial views. Main Outcome Measurements: Comparison of measured symphyseal diastasis on CT and pelvic radiographs. Results: Seventy-two patients met the inclusion criteria. Ninety-seven percent (70/72) had a reduction of their symphysis diastasis in the CT with an average reduction of 6.6 mm (Range, −2.6 to 35.5 mm). The average diastasis on radiograph was 26.3 mm compared with 19.7 mm on CT scout (P < 0.001). Fourteen patients (19.2%) had a reduction from greater than 25 mm to less than 25 mm—a traditional cutoff for operative intervention. Conclusions: The anteroposterior pelvis radiograph remains an important part of the workup for trauma patients. Reliance on CT alone may underestimate the true degree of pelvic displacement. Failure to obtain pelvic radiographs in the acute setting limits the information in which the medical team can base both immediate and definitive decisions about pelvic ring injuries. Level of Evidence: Diagnostic level III. See Instructions for Authors for a complete description of levels of evidence.