Markus Kasper

Impact of Low- and High-Oxidation Diesel Particulate Filters on Genotoxic Exhaust Constituents

Diesel exhaust contains several genotoxic compounds that may or may not penetrate diesel particulate filters (DPFs). Furthermore, the DPF-supported combustion of soot and adsorbed compounds may lead to the formation of additional pollutants. Herein, we compare the impact of 14 different DPFs on emissions of known genotoxic compounds. During a four year period, these DPFs were tested on a heavy duty diesel engine, operated in the ISO 8178/4 C1 cycle. Integral samples, including gas-phase and particle-bound matter were taken. All DPFs were efficient wall-flow filters with solid particulate number filtration efficiencies eta > 98%. On the basis of their CO, NO, and NO(2) emission characteristics, two different filter families were distinguished. DPFs with high oxidation potential (hox, n = 8) converted CO and NO besides hydrocarbons, whereas low oxidation potential DPFs (lox, n = 6) did not support CO and NO oxidation but still converted hydrocarbons. Lox-DPFs reduced NO(2) from 1.0 +/- 0.3 (engine-out) to 0.42 +/- 0.11 g/kWh (eta = 0.59), whereas hox-DPFs induced a NO(2) formation up to 3.3 +/- 0.7 g/kWh (eta = -2.16). Emissions of genotoxic PAHs decreased for both filter families. Conversion efficiencies varied for individual PAHs and were lower for lox- (eta = 0.31-0.87) than for hox-DPFs (eta = 0.75-0.98). Certain nitro-PAHs were formed indicating that nitration is an important step along PAH oxidation. For example, 1-nitronaphthalene emissions increased from 11 to 17 to 21 microg/L without, with lox-, and hox-DPFs respectively, whereas 2-nitronaphthalene emissions decreased from 25 to 19 to 4.7 microg/L. In contrast to our expectations, the nitration potential of lox-DPFs was higher than the one of hox-DPFs, despite the intense NO(2) formation of the latter. The filters converted most genotoxic PAHs and nitro-PAHs and most soot particles, acting as carriers for these compounds. Hox-DPF exhaust remains oxidizing and therefore is expected to support atmospheric oxidation reactions, whereas lox-DPF exhaust is reducing and consuming oxidants such as ozone, when mixed with ambient air.

New Exposure System To Evaluate the Toxicity of (Scooter) Exhaust Emissions in Lung Cells in Vitro

A constantly growing number of scooters produce an increasing amount of potentially harmful emissions. Due to their engine technology, two-stroke scooters emit huge amounts of adverse substances, which can induce adverse pulmonary and cardiovascular health effects. The aim of this study was to develop a system to expose a characterized triple cell coculture model of the human epithelial airway barrier, to freshly produced and characterized total scooter exhaust emissions. In exposure chambers, cell cultures were exposed for 1 and 2 h to 1:100 diluted exhaust emissions and in the reference chamber to filtered ambient air, both controlled at 5% CO(2), 85% relative humidity, and 37 degrees C. The postexposure time was 0-24 h. Cytotoxicity, used to validate the exposure system, was significantly increased in exposed cell cultures after 8 h postexposure time. (Pro-) inflammatory chemo- and cytokine concentrations in the medium of exposed cells were significantly higher at the 12 h postexposure time point. It was shown that the described exposure system (with 2 h exposure duration, 8 and 24 h postexposure time, dilution of 1:100, flow of 2 L/min as optimal exposure conditions) can be used to evaluate the toxic potential of total exhaust emissions.

Field Measurement of Particle Size and Number Concentration with the Diffusion Size Classifier (Disc)

The Diffusion Size Classifier (DiSC) is a new instrument to measure number concentration and average diameter of nanometer sized particles in the size range 10 200nm. It is small, easily portable and battery operated and therefore well suited for field measurements. The measurement range is suitable for ambient air concentrations (1000 – 500000 particles/cm); together with a diluter it can be used for emission measurements. The number concentrations measured with DiSC agree well with those measured with a condensation particle counter. The response time is short enough to measure transient engine operation. The DiSC is therefore a useful instrument for number concentration measurements in non-laboratory settings.

Effects of a combined Diesel particle filter-DeNOx system (DPN) on reactive nitrogen compounds emissions: a parameter study.

The impact of a combined diesel particle filter-deNO(x) system (DPN) on emissions of reactive nitrogen compounds (RNCs) was studied varying the urea feed factor (α), temperature, and residence time, which are key parameters of the deNO(x) process. The DPN consisted of a platinum-coated cordierite filter and a vanadia-based deNO(x) catalyst supporting selective catalytic reduction (SCR) chemistry. Ammonia (NH₃) is produced in situ from thermolysis of urea and hydrolysis of isocyanic acid (HNCO). HNCO and NH₃ are both toxic and highly reactive intermediates. The deNO(x) system was only part-time active in the ISO8178/4 C1cycle. Urea injection was stopped and restarted twice. Mean NO and NO₂ conversion efficiencies were 80%, 95%, 97% and 43%, 87%, 99%, respectively, for α = 0.8, 1.0, and 1.2. HNCO emissions increased from 0.028 g/h engine-out to 0.18, 0.25, and 0.26 g/h at α = 0.8, 1.0, and 1.2, whereas NH₃ emissions increased from <0.045 to 0.12, 1.82, and 12.8 g/h with maxima at highest temperatures and shortest residence times. Most HNCO is released at intermediate residence times (0.2-0.3 s) and temperatures (300-400 °C). Total RNC efficiencies are highest at α = 1.0, when comparable amounts of reduced and oxidized compounds are released. The DPN represents the most advanced system studied so far under the VERT protocol achieving high conversion efficiencies for particles, NO, NO₂, CO, and hydrocarbons. However, we observed a trade-off between deNO(x) efficiency and secondary emissions. Therefore, it is important to adopt such DPN technology to specific application conditions to take advantage of reduced NO(x) and particle emissions while avoiding NH₃ and HNCO slip.

PCDD/F Formation in an iron/potassium-catalyzed diesel particle filter.

Catalytic diesel particle filters (DPFs) have evolved to a powerful environmental technology. Several metal-based, fuel soluble catalysts, so-called fuel-borne catalysts (FBCs), were developed to catalyze soot combustion and support filter regeneration. Mainly iron- and cerium-based FBCs have been commercialized for passenger cars and heavy-duty vehicle applications. We investigated a new iron/potassium-based FBC used in combination with an uncoated silicon carbide filter and report effects on emissions of polychlorinated dibenzodioxins/furans (PCDD/Fs). The PCDD/F formation potential was assessed under best and worst case conditions, as required for filter approval under the VERT protocol. TEQ-weighted PCDD/F emissions remained low when using the Fe/K catalyst (37/7.5 μg/g) with the filter and commercial, low-sulfur fuel. The addition of chlorine (10 μg/g) immediately led to an intense PCDD/F formation in the Fe/K-DPF. TEQ-based emissions increased 51-fold from engine-out levels of 95 to 4800 pg I-TEQ/L after the DPF. Emissions of 2,3,7,8-TCDD, the most toxic congener (TEF = 1.0), increased 320-fold, those of 2,3,7,8-TCDF (TEF = 0.1) even 540-fold. Remarkable pattern changes were noticed, indicating a preferential formation of tetrachlorinated dibenzofurans. It has been shown that potassium acts as a structural promoter inducing the formation of magnetite (Fe3O4) rather than hematite (Fe2O3). This may alter the catalytic properties of iron. But the chemical nature of this new catalyst is yet unknown, and we are far from an established mechanism for this new pathway to PCDD/Fs. In conclusion, the iron/potassium-catalyzed DPF has a high PCDD/F formation potential, similar to the ones of copper-catalyzed filters, the latter are prohibited by Swiss legislation.

Investigating the potential for different scooter and car exhaust emissions to cause cytotoxic and (pro-)inflammatory responses to a 3D in vitro model of the human epithelial airway

The aim of this study was to compare the cytotoxicity and the (pro-)inflammatory responses of two-stroke (direct injection and carburetor technology) and four-stroke scooter and diesel car exhaust emissions on lung cells in vitro. This was analyzed by exposing a 3D in vitro model of the epithelial airway (consisting of human bronchial epithelial cells (cell line 16HBE14o−) combined with human whole blood monocyte-derived macrophages and dendritic cells) to physically characterized exhaust emissions. Biological endpoints of cytotoxicity (lactate dehydrogenase release), as well as pro-inflammatory cytokine (tumor necrosis factor (TNF)-α) and inflammatory chemokine (interleukin(IL)-8) stimulation were examined. Two-stroke direct injection scooter exhaust contained the highest particle number concentration and nitrogen oxides (NO x ) concentrations and the emissions from the two-stroke carburetor scooter contained the highest hydrocarbon and lowest NO x concentrations. The four-stroke scooter emitted the highest carbon monoxide concentration whereas the cars emitted the lowest. The combination of various technical optimizations for the two-stroke direct injection scooter (particle filter, oxidative catalyst, better oil and fuel) reduced the total emissions strongly and the TNF-α concentration significantly (p < 0.05). The cytotoxicity and the IL-8 concentration showed strong tendencies to be reduced. The analysis of the emissions of all tested two-stroke, four-stroke scooters and diesel cars showed a strong association between the adverse effects and the particle number concentration.

Quality Standards and Test Procedures for Particle Filters to Retrofit Utility Vehicles

A new approach is needed to test particle filters for retrofitting Diesel engines. Considering the toxicity of the particles as also the physical and chemical attributes of particle filters, the optimal scheme is to test the components themselves independent of the deployment. That scheme ensures the highest effectiveness with least effort. It also enables evaluation of worst-case situations and assesses the hazards of secondary emissions. The Swiss standard SNR 277 205, which mandates the VERT test procedure, is a first step in that direction.

Qualitätsstandards und Prüfverfahren für Partikelfilter zur Nachrüstung von Nutzfahrzeugen

Zur Prufung von Partikelfiltern fur die Nachrustung von Dieselmotoren mussen neue Wege beschritten werden. Unter Berucksichtigung der gesundheitlichen Wirkungen der Partikel sowie der physikalischen und chemischen Eigenschaften von Partikelfiltern ergibt sich als optimale Losung die Prufung der Komponente selbst, getrennt von der Anwendung. Das gewahrleistet hochste Effizienz bei geringstem Aufwand und gestattet, Worst-case-Situationen und die Bildung von Sekundaremissionen mit zu berucksichtigen. Mit der Schweizerischen Norm SNR 277 205, die das VERT-Prufprotokoll festschreibt, wurde ein erster Schritt in dieser Richtung unternommen, wie der gemeinschaftliche Beitrag von TTM, AFHB, Matter Engineering, AirConsult, EMPA und Tecmot zeigt.