Markus Nuopponen

Visualization of Nanofibrillar Cellulose in Biological Tissues Using a Biotinylated Carbohydrate Binding Module of β-1,4-Glycanase.

Nanofibrillar cellulose is a very promising innovation with diverse potential applications including high quality paper, coatings, and drug delivery carriers. The production of nanofibrillar cellulose on an industrial scale may lead to increased exposure to nanofibrillar cellulose both in the working environment and the general environment. Assessment of the potential health effects following exposure to nanofibrillar cellulose is therefore required. However, as nanofibrillar cellulose primarily consists of glucose moieties, detection of nanofibrillar cellulose in biological tissues is difficult. We have developed a simple and robust method for specific and sensitive detection of cellulose fibers, including nanofibrillar cellulose, in biological tissue, using a biotinylated carbohydrate binding module (CBM) of β-1,4-glycanase (EXG:CBM) from the bacterium Cellulomonas fimi. EXG:CBM was expressed in Eschericia coli, purified, and biotinylated. EXG:CBM was shown to bind quantitatively to five different cellulose fibers including four different nanofibrillar celluloses. Biotinylated EXG:CBM was used to visualize cellulose fibers by either fluorescence- or horse radish peroxidase (HRP)-tagged avidin labeling. The HRP-EXG:CBM complex was used to visualize cellulose fibers in both cryopreserved and paraffin embedded lung tissue from mice dosed by pharyngeal aspiration with 10-200 μg/mouse. Detection was shown to be highly specific, and the assay appeared very robust. The present method represents a novel concept for the design of simple, robust, and highly specific detection methods for the detection of nanomaterials, which are otherwise difficult to visualize.

The vane method and kinetic modeling: shear rheology of nanofibrillated cellulose suspensions

We conduct rheological characterization of nanofibrillated cellulose (NFC) suspensions, a highly non-Newtonian complex fluid, at several concentrations. Special care is taken to cope with the prevalent problems of time scale issues, wall depletion and confinement effects. We do this by combining the wide-gap vane geometry, extremely long measurement times, and modeling. We take into account the wide-gap related stress heterogeneity by extending upon mainstream methods and apply a gap correction. Furthermore, we rationalize the experimental data through a simple viscous structural model. With these tools we find that, owing to the small size of the particles subjected to Brownian motion, the NFC suspensions exhibit a critical shear rate, where the flow curve experiences a turning point. This makes the steady state of these suspensions at low shear rates non-unique. To optimize various mixing and pumping applications, such history dependent tendency of NFC suspensions to shear band needs to be taken into account.

Crystal morphology modification by the addition of tailor-made stereocontrolled poly(N-isopropyl acrylamide).

The use of additives in crystallization of pharmaceuticals is known to influence the particulate properties critically affecting downstream processing and the final product performance. Desired functionality can be build into these materials, e.g. via optimized synthesis of a polymeric additive. One such additive is the thermosensitive polymer poly(N-isopropyl acrylamide) (PNIPAM). The use of PNIPAM as a crystallization additive provides a possibility to affect viscosity at separation temperatures and nucleation and growth rates at higher temperatures. In this study, novel PNIPAM derivatives consisting of both isotactic-rich and atactic blocks were used as additives in evaporative crystallization of a model compound, nitrofurantoin (NF). Special attention was paid to possible interactions between NF and PNIPAM and the aggregation state of PNIPAM as a function of temperature and solvent composition. Optical light microscopy and Raman and FTIR spectroscopy were used to investigate the structure of the NF crystals and possible interaction with PNIPAM. A drastic change in the growth mechanism of nitrofurantoin crystals as monohydrate form II (NFMH-II) was observed in the presence of PNIPAM; the morphology of crystals changed from needle to dendritic shape. Additionally, the amphiphilic nature of PNIPAM increased the solubility of nitrofurantoin in water. PNIPAMs with varying molecular weights and stereoregularities resulted in similar changes in the crystal habit of the drug regardless of whether the polymer was aggregated or not. However, with increased additive concentration slower nucleation and growth rates of the crystals were observed. Heating of the crystallization medium resulted in phase separation of the PNIPAM. The phase separation had an influence on the achieved crystal morphology resulting in fewer, visually larger and more irregular dendritic crystals. No proof of hydrogen bond formation between PNIPAM and NF was observed, and the suggested mechanism for the observed dendritic morphology is related to the steric hindrance phenomenon. PNIPAM can be used as a crystallization additive with an obvious effect on the growth of NF crystals.

Activation of TEMPO by ClO2 for oxidation of cellulose by hypochlorite — Fundamental and practical aspects of the catalytic system

Bromide-free TEMPO-catalyzed oxidation of the primary alcohols by sodium hypochlorite (NaOCl) does not proceed without a prior activation of the catalyst. Here were demonstrate an immediate in situ activation of the catalyst with an equimolar addition of chlorine dioxide (ClO2) relative to TEMPO. Sodium bromide (NaBr) had a similar role in activating the catalyst although NaBr was needed in excess and the activation took several minutes depending on the dosage of NaBr. The activation method, or the concentration of NaBr, did not affect the bulk oxidation rate. The selectivity of the ClO2 initiated oxidation remained high up to NaOCl addition of 3mol/kg bleached birch kraft pulp after which additional loss in yield and depolymerization of cellulose were emphasized with negligible increase in carboxylate content. A carboxylate content of 0.8-1mol/kg, sufficient for easy mechanical fibrillation of the pulp, was achieved under mild conditions with NaOCl addition of 2-2.5mol/kg pulp.

Nanofibrillated cellulose causes acute pulmonary inflammation that subsides within a month

Abstract Nanofibrillated cellulose (NFC) is a renewable nanomaterial that has beneficial uses in various applications such as packaging materials and paper. Like carbon nanotubes (CNT), NFCs have high aspect ratio and favorable mechanical properties. The aspect ratio also rises a concern whether NFC could pose a health risk and induce pathologies, similar to those triggered by multi-walled CNT. In this study, we explored the immunomodulatory properties of four NFCs in vitro and in vivo, and compared the results with data on bulk-sized cellulose fibrils and rigid multi-walled CNT (rCNT). Two of the NFCs were non-functionalized and two were carboxymethylated or carboxylated. We investigated the production of pro-inflammatory cytokines in differentiated THP-1 cells, and studied the pulmonary effects and biopersistence of the materials in mice. Our results demonstrate that one of the non-functionalized NFCs tested reduced cell viability and triggered pro-inflammatory reactions in vitro. In contrast, all cellulose materials induced innate immunity response in vivo 24 h after oropharyngeal aspiration, and the non-functionalized NFCs additionally caused features of Th2-type inflammation. Modest immune reactions were also seen after 28 days, however, the effects were markedly attenuated as compared with the ones after 24 h. Cellulose materials were not cleared within 1 month, as demonstrated by their presence in the exposed lungs. All effects of NFC were modest as compared with those induced by rCNT. NFC-induced responses were similar or exceeded those triggered by bulk-sized cellulose. These data provide new information about the biodurability and pulmonary effects of different NFCs; this knowledge can be useful in the risk assessment of cellulose materials.

Erratum to: Flocculation of microfibrillated cellulose in shear flow

The article “Flocculation of microfibrillated cellulose in shear flow”, written by Anni Karppinen, Tapio Saarinen, Juha Salmela, Antti Laukkanen, Markus Nuopponen and Jukka Seppälä, was originally published Online First without open access.