Marta Nunes

High-Performance Electrochromic Devices Based on Poly[Ni(salen)]-Type Polymer Films

We report the application of two poly[Ni(salen)]-type electroactive polymer films as new electrochromic materials. The two films, poly[Ni(3-Mesalen)] (poly[1]) and poly[Ni(3-MesaltMe)] (poly[2]), were successfully electrodeposited onto ITO/PET flexible substrates, and their voltammetric characterization revealed that poly[1] showed similar redox profiles in LiClO4/CH3CN and LiClO4/propylene carbonate (PC), while poly[2] showed solvent-dependent electrochemical responses. Both films showed multielectrochromic behavior, exhibiting yellow, green, and russet colors according to their oxidation state, and promising electrochromic properties with high electrochemical stability in LiClO4/PC supporting electrolyte. In particular, poly[1] exhibited a very good electrochemical stability, changing color between yellow and green (λ = 750 nm) during 9000 redox cycles, with a charge loss of 34.3%, an optical contrast of ΔT = 26.2%, and an optical density of ΔOD = 0.49, with a coloration efficiency of η = 75.55 cm(2) C(-1). On the other hand, poly[2] showed good optical contrast for the color change from green to russet (ΔT = 58.5%), although with moderate electrochemical stability. Finally, poly[1] was used to fabricate a solid-state electrochromic device using lateral configuration with two figures of merit: a simple shape (typology 1) and a butterfly shape (typology 2); typology 1 showed the best performance with optical contrast ΔT = 88.7% (at λ = 750 nm), coloration efficiency η = 130.4 cm(2) C(-1), and charge loss of 37.0% upon 3000 redox cycles.

Sucrose-derived activated carbons: electron transfer properties and application as oxygen reduction electrocatalysts

The development of carbon-based metal-free electrocatalysts for the oxygen reduction reaction (ORR) is one of the most attractive topics in fuel cell field. Herein, we report the application of two sustainable sucrose-based activated carbons (ACs), denominated SC800 and SH800, as ORR electrocatalysts. In alkaline medium the ACs showed similar onset potentials at Eonset ≈ −0.20 V vs. Ag/AgCl (0.76 V vs. ERHE), which are 0.06 V more negative than that observed for 20 wt% Pt/C used as a reference. Higher diffusion-limiting current densities (jL(−1.0 V, 1600 rpm) = −3.44 mA cm−2) were obtained for the SH800 electrocatalyst, in contrast to SC800 (jL(−1.0 V, 1600 rpm) = −3.04 mA cm−2). These differences can be related with their different textural properties. The SH800 electrocatalyst revealed a higher specific surface area (ABET ≈ 2500 m2 g−1), larger micropores (widths between 0.7 and 2 nm) and sponge-like morphology. Conversely, SC800 showed a spherical shape, ABET ≈ 1400 m2 g−1 and narrow micropores with pore width <0.7 nm. Both ACs were neither selective to 2- or 4-electron ORR processes, opposing Pt/C which showed selectivity towards direct O2 reduction to water. SH800 and SC800 showed very similar Tafel plots, but with SH800 showing in both low and high current density regions, the lowest slopes values 53/171 mV dec−1 vs. 68/217 mV dec−1. Furthermore, the ACs presented excellent tolerance to methanol, with the SH800 electrocatalyst also showing greater long-term electrochemical stability than the Pt/C electrocatalyst which are very important advantages. The ACs-based electrocatalysts also showed ORR catalytic activity in acidic media, which makes them promising candidates for applications with acidic electrolytes (e.g. proton exchange fuel cells). In this case, Eonset = 0.06 V vs. Ag/AgCl (0.41 V vs. ERHE) for SC800 and Eonset = −0.01 V vs. Ag/AgCl (0.34 V vs. ERHE) for SH800, and the diffusion-limiting current densities are very similar for both ACs (jL = −2.59/−2.76 mA cm−2 at −1.3 V vs. Ag/AgCl, at 1600 rpm). SH800 and SC800 Tafel plots also showed two different slopes, but with higher values in both low and high current density regions, when compared with those obtained in an alkaline medium; still SH800 continues to show the lowest slopes.

POM & MOF-based Electrocatalysts for Energy-related Reactions

Electrocatalysis plays a central role in clean energy conversion, enabling a number of sustainable processes for future technologies and the development of highly efficient and cost‐effective materials is one of the current major challenges. This results from the current global energy crisis, reflected in the depletion of fossil fuels and growth of the environmental pollution, which has stimulated the development of novel renewable energy storage and conversion technologies. Currently, several electrocatalysts have been proposed and among them are the polyoxometalates (POMs), the metal‐organic frameworks (MOFs) and their based composites.

Multicolour Electrochromic Film Based on a TiO2@poly[Ni(salen)] Nanocomposite with Excellent Electrochemical Stability

We report the electrochromic properties of a polymeric nanocomposite prepared by potentiodynamic deposition of transition-metal complex [Ni(3-Mesalen)], designated as [1], in the presence of TiO2 nanoparticles (NPs) with an average size of 9.7 ± 1.1 nm. Entrapment of TiO2 NPs in the poly[1] matrix was confirmed by several techniques. The nanocomposite TiO2@poly[1] films showed similar electrochemical responses to the original (nanoparticle-free) poly[1] films, but with higher electroactive surface coverages (Γ), showing the advantage of the nanocomposite preparation. The results indicated that the electronic structure of poly[1] was retained in the nanocomposite; nonetheless, a lower ε value was obtained for the charge-transfer band of the former, revealing superior stability of the nanocomposite for ligand high oxidation states. The TiO2@poly[1] nanocomposite showed interesting color changes, from yellow (reduced state) to green and russet (oxidized states), with enhanced electrochemical stability, demonstrated by a charge loss of only 7.3% over ca. 10 000 redox cycles surpassing the original polymer film stability: the loss of electroactivity is a factor of ca. 2 less than for pristine poly[1]. Furthermore, an enhancement of 16.7% in the optical modulation (ΔOD = 0.48) was also observed for the nanocomposite, confirming the benefit of TiO2 incorporation into the EC properties of the original polymer film.