Martin A. K. Williams

A molecular description of the gelation mechanism of curdlan.

The gelation of aqueous suspensions of the polysaccharide curdlan has been studied by dynamic rheological measurements, differential scanning calorimetry, and low-resolution time-domain 1H-NMR. Gel formation from several samples, each originating from a curdlan fraction of differing molecular weight, has been observed in order to further clarify the nature of observed phenomena by monitoring their dependence on degree of polymerisation. The results from the complementary techniques described here, in addition to those in existing literature, both for curdlan and for other ss-(1,3) glucans, have been used to build up a consistent framework for the interpretation of results. Broadly, this involves the plasticisation and dissolution of dried material on heating, the time-dependent annealing of native (as biosynthesised) structures, and the trapping of imperfectly formed pseudo-equilibrium states on re-cooling, in concert with the creation of microfibrils and network formation.

Bovine β-Lactoglobulin Is Dimeric Under Imitative Physiological Conditions: Dissociation Equilibrium and Rate Constants over the pH Range of 2.5–7.5

The oligomerization of β-lactoglobulin (βLg) has been studied extensively, but with somewhat contradictory results. Using analytical ultracentrifugation in both sedimentation equilibrium and sedimentation velocity modes, we studied the oligomerization of βLg variants A and B over a pH range of 2.5-7.5 in 100 mM NaCl at 25°C. For the first time, to our knowledge, we were able to estimate rate constants (k(off)) for βLg dimer dissociation. At pH 2.5 k(off) is low (0.008 and 0.009 s(-1)), but at higher pH (6.5 and 7.5) k(off) is considerably greater (>0.1 s(-1)). We analyzed the sedimentation velocity data using the van Holde-Weischet method, and the results were consistent with a monomer-dimer reversible self-association at pH 2.5, 3.5, 6.5, and 7.5. Dimer dissociation constants K(D)(2-1) fell close to or within the protein concentration range of ∼5 to ∼45 μM, and at ∼45 μM the dimer predominated. No species larger than the dimer could be detected. The K(D)(2-1) increased as |pH-pI| increased, indicating that the hydrophobic effect is the major factor stabilizing the dimer, and suggesting that, especially at low pH, electrostatic repulsion destabilizes the dimer. Therefore, through Poisson-Boltzmann calculations, we determined the electrostatic dimerization energy and the ionic charge distribution as a function of ionic strength at pH above (pH 7.5) and below (pH 2.5) the isoelectric point (pI∼5.3). We propose a mechanism for dimer stabilization whereby the added ionic species screen and neutralize charges in the vicinity of the dimer interface. The electrostatic forces of the ion cloud surrounding βLg play a key role in the thermodynamics and kinetics of dimer association/dissociation.

Enzymatic modification of a model homogalacturonan with the thermally tolerant pectin methylesterase from Citrus: 1. Nanostructural characterization, enzyme mode of action, and effect of pH.

Methyl ester distribution in pectin homogalacturonan has a major influence on functionality. Enzymatic engineering of the pectin nanostructure for tailoring functionality can expand the role of pectin as a food-formulating agent and the use of in situ modification in prepared foods. We report on the mode of action of a unique citrus thermally tolerant pectin methylesterase (TT-PME) and the nanostructural modifications that it produces. The enzyme was used to produce a controlled demethylesterification series from a model homogalacturonan. Oligogalacturonides released from the resulting demethylesterified blocks introduced by TT-PME using a limited endopolygalacturonase digestion were separated and quantified by high-pressure anion-exchange chromatography (HPAEC) coupled to an evaporative light-scattering detector (ELSD). The results were consistent with the predictions of a numerical simulation, which assumed a multiple-attack mechanism and a degree of processivity ∼10, at both pH 4.5 and 7.5. The average demethylesterified block size (0.6-2.8 nm) and number of average-sized blocks per molecule (0.8-1.9) differed, depending upon pH of the enzyme treatment. The mode of action of this enzyme and consequent nanostructural modifications of pectin differ from a previously characterized citrus salt-independent pectin methylesterase (SI-PME).

Innovative enzymatic approach to resolve homogalacturonans based on their methylesterification pattern.

Three series of model homogalacturonans (HGs) covering a large range of degree of methylesterification (DM) were prepared by chemical and/or enzymatic means. Randomly demethylesterified HGs, HGs containing a few long demethylesterified galacturonic acid stretches, and HGs with numerous but short demethylesterified blocks were recovered. The analysis of the degradation products generated by the action of a purified pectin lyase allowed the definition of two new parameters, the degree of blockiness, and the absolute degree of blockiness of the highly methylesterified stretches (DBMe and DB(abs)Me, respectively). By combining this information with that obtained by the more traditional endopolygalacturonase digestion, the total proportion of degradable zones for a given DM was measured and was shown to permit a clear differentiation of the three types of HG series over a large range of DM. This double enzymatic approach will be of interest to discriminate industrial pectin samples exhibiting different functionalities and to evaluate pectin fine structure dynamics in vivo in the plant cell wall, where pectin plays a key mechanical role.

Separation and quantification of pectins using capillary electrophoresis : a preliminary study

Abstract A rapid method for the analysis of the degree of esterification (DE) of pectin is presented. The migration time of pectin in capillary electrophoresis (CE) is a function of the DE, and separation of pectins with different DE values has been demonstrated. Using the average charge per residue, z = −(100−DE) 100 , a linear relationship is found between pectin charge and mobility. For a fixed charge mobility increases with decreasing ionic strength, but does not depend significantly on whether the pectin charge distribution is blockwise or random. This CE method can be used for the quantitative detection of aqueous solutions of pectins in the concentration range 0.5–5 mg ml−1 using a 50 mM, pH 7.0 phosphate background electrolyte and u.v. detection at 192 nm.

Microrheological investigations give insights into the microstructure and functionality of pectin gels.

Many of the functional attributes of pectin, whether in the plant cell wall or in engineered food materials, are linked to its gelling properties and in particular to its ability to assemble in the presence of calcium. Pectins fine structure and local concentration relative to that of its cross-linking ion play a major role in determining resultant gel micro-structures, and consequently the mechanical and transport properties of pectin matrices. Recent studies have sought to probe the basic properties of such calcium-induced matrices, using a light scattering technique called diffusing wave spectroscopy (DWS). In addition to the low frequency mechanical behaviour, which provides information about the nature and density of cross-links, microrheological measurements carried out with DWS are able to determine the high frequency behaviour, which is closely linked to the response of the basic strands of the network. By using these microrheological measurements, two distinct regimes have been identified into which pectin gels appear to fall: one corresponding to the presence of semi-flexible networks, a generally accepted paradigm in biological gels, and another where flexible networks dominate. In order to explain the origin of these dramatically different networks, distinct assembly pathways have been proposed in which the relative importance of the free energy gained by association and the frictional barrier to polymeric re-arrangement during network formation can differ significantly. By manipulating the local environment in the plant cell wall it is possible that Nature makes full use of both of these network types for fulfilling different tasks; such as providing strain-hardening, maximizing local elastic properties or controlling macromolecular transport.

Characterization of gold kiwifruit pectin from fruit of different maturities and extraction methods

Studies on gold kiwifruit pectins are limited. In this work, the characterization of pectin isolated from two different stages of maturity of gold kiwifruit, namely early harvested fruit (EHF) and main harvested fruit (MHF) isolated by three methods (acid, water, enzymatic) was carried out. Pectins isolated from MHF were higher in galacturonic acid content (52-59% w/w) and weight-average molecular weights (Mw, 1.7-3.8 × 10(6)g/mol) compared with EHF pectins (29-49% w/w and 0.2-1.7 × 10(6)g/mol respectively). Enzymatic treatment gave the highest yield but lowest in Mw, viscosity and mechanical spectra for both maturities. The pectin of both maturities was classified as high-methoxyl pectin with the degree of esterification ranged from 82% to 90%. Water-extracted MHF pectin molecules had the highest RMS radius (182.7 nm) and Mw (3.75 × 10(6)g/mol). The water extraction method appeared to retain the native state of pectin molecules compared with acid and enzymatic extraction methods based on the Mw and viscosity data.

Nonlinear Behavior of Gelatin Networks Reveals a Hierarchical Structure

We investigate the strain hardening behavior of various gelatin networks-namely physical gelatin gel, chemically cross-linked gelatin gel, and a hybrid gel made of a combination of the former two-under large shear deformations using the pre-stress, strain ramp, and large amplitude oscillations shear protocols. Further, the internal structures of physical gelatin gels and chemically cross-linked gelatin gels were characterized by small angle neutron scattering (SANS) to enable their internal structures to be correlated with their nonlinear rheology. The Kratky plots of SANS data demonstrate the presence of small cross-linked aggregates within the chemically cross-linked network whereas, in the physical gelatin gels, a relatively homogeneous structure is observed. Through model fitting to the scattering data, we were able to obtain structural parameters, such as the correlation length (ξ), the cross-sectional polymer chain radius (R(c)) and the fractal dimension (d(f)) of the gel networks. The fractal dimension d(f) obtained from the SANS data of the physical and chemically cross-linked gels is 1.31 and 1.53, respectively. These values are in excellent agreement with the ones obtained from a generalized nonlinear elastic theory that has been used to fit the stress-strain curves. The chemical cross-linking that generates coils and aggregates hinders the free stretching of the triple helix bundles in the physical gels.

Molecular interactions in, and rheological properties of, a mixed biopolymer system undergoing order/disorder transitions

Abstract Gelatin from cold water fish species and κ-carrageenan are both thermo-setting biopolymers of a poly-electrolytic character. By adjusting parameters such as pH and ionic strength, these polymers can, in the disordered state, associatively interact through electrostatic interactions. In the present study, the changes taking place at the molecular level are sought and linked to the rheological properties in a mixed system of these two biopolymers under conditions initially favouring associative phase separation (pH below IEP of the gelatin and low ionic strength). More specifically, these changes were followed as function of temperature with special emphasis on changes taking place close to the order/disorder temperature regimes of the two polymers. The present study concludes that a variety of complex structural arrangements can be obtained, and that dynamic processes in the form of structural re-arrangements are present when the single components are forced to undergo order/disorder transitions.

Electrophoretic Behavior of Copolymeric Galacturonans Including Comments on the Information Content of the Intermolecular Charge Distribution

Capillary electrophoresis has been used to characterize samples of the copolymeric anionic polysaccharides homo- and rhamno-galacturonan (HG and RGI, respectively). In the case of HG, the ratios of the two component sugar residues, galacturonic acid and its methylesterified analogue, have been controlled chemically to produce samples comprised of varying degrees of methylesterification (DM). The mapping of the measured electrophoretic mobilities to the biopolymer charge density has been considered in some detail and for HG substrates with random intramolecular patterns of methylesterification it is shown that the experimentally extracted intermolecular DM distribution agrees well with the predictions of calculations based on the binomial theorem. This demonstrates that the intermolecular distribution of the methylesterification of pectin samples contains information on the intramolecular pattern by virtue of the fact that they are both manifestations of the same statistical process.