Martin Schroeder

Saproxylic beetles in high stumps of spruce: Fungal flora important for determining the species composition

In most Swedish felling operations high stumps are created from living trees to increase the amounts of dead wood in the forest. The fauna of saproxylic beetles and aradid bugs (Heteroptera) in spruce (Picea abies) high stumps were studied to determine which characteristics (diameter, height, amount of bark and fungal flora) had the strongest influence on the species composition. The practical aim was to see whether it is possible to increase the biodiversity values by management recommendations. The high stumps (n=59) were situated in the middle boreal zone in Sweden and were 6 years old. The insects were sampled by sieving 0.25 m2 bark on each stump In total, 803 saproxylic beetles and Aradus bugs were found, representing 42 different species, five of which were red-listed. The most important factor for determining the beetle community was the presence or absence of two polyporous fungi, Fomitopsis pinicola and Trichaptum abietinum. Other factors were much less important, indicating that it is difficult to influence the stumps’ biodiversity values significantly simply by selecting trees of certain diameters or optimizing cutting heights.

Long-term priority effects among insects and fungi colonizing decaying wood

1. Priority effects have been hypothesized to have long-lasting impact on community structure in natural ecosystems. Long-term studies of priority effects in natural ecosystems are however sparse, especially in terrestrial ecosystems. 2. Wood decay is a slow process involving a high diversity of insect and fungus species. Species interactions that drive change in communities of insects and fungi during wood decay are poorly understood because of a lack of sufficient long-term studies. 3. In this paper, we followed the colonization and succession of wood-living insects and fungi on cut trees during 15 years, from tree death and onwards, in a boreal forest landscape. We test the long-term priority effects hypothesis that the identity and abundance of species that colonize first affect the colonization success of later-arriving species. We also hypothesize that species interact in both facilitative and inhibitory ways, which ultimately affect habitat quality for a red-listed late-succession beetle species. 4. Possible causal associations between species were explored by path analysis. The results indicate that one bark beetle species, Hylurgops palliatus, and one wood-borer species, Monochamus sutor, which colonized the wood during the first year after cutting, influenced the occurrence of a rare, wood-living beetle, Peltis grossa, that started to emerge from the stumps about 10 years later. The positive effects of Hylurgops palliatus and negative effects of M. sutor were largely mediated through the wood-decaying fungus species Fomitopsis pinicola. 5. The study shows that variable priority effects may have long-lasting impact on community assembly in decaying wood. The study also exemplifies new possibilities for managing populations of threatened species by exploring links between early, well-understood species guilds and late, more poorly understood species guilds.

2-(Undecyloxy)-ethanol is a major component of the male-produced aggregation pheromone of Monochamus sutor

The small white‐marmorated longicorn beetle, Monochamus sutor (L.) (Coleoptera: Cerambycidae), is widely distributed throughout Europe and Asia. It is a potential vector of the pine wood nematode, Bursaphelenchus xylophilus (Steiner et Buhrer) Nickle, the causal agent of the devastating pine wilt disease. Volatiles were collected from both male and female beetles after maturation feeding. In analyses of these collections using gas chromatography (GC) coupled to mass spectrometry, a single male‐specific compound was detected and identified as 2‐(undecyloxy)‐ethanol. In analyses by GC coupled to electroantennography the only consistent responses from both female and male antennae were to this compound. Trapping tests were carried out in Spain, Sweden, and China. 2‐(Undecyloxy)‐ethanol was attractive to both male and female M. sutor beetles. A blend of the bark beetle pheromones ipsenol, ipsdienol, and 2‐methyl‐3‐buten‐2‐ol was also attractive to both sexes in Spain and Sweden, and further increased the attractiveness of the 2‐(undecyloxy)‐ethanol. The host plant volatiles α‐pinene, 3‐carene, and ethanol were weakly attractive, if at all, in all three countries and did not significantly increase the attractiveness of the blend of 2‐(undecyloxy)‐ethanol and bark beetle pheromones. 2‐(Undecyloxy)‐ethanol is thus proposed to be the major, if not only, component of the male‐produced aggregation pheromone of M. sutor, and its role is discussed. This compound has been reported as a pheromone of several other Monochamus species and is another example of the parsimony that seems to exist among the pheromones of many of the Cerambycidae. Traps baited with 2‐(undecyloxy)‐ethanol and bark beetle pheromones should be useful for monitoring and control of pine wilt disease, should M. sutor be proven to be a vector of the nematode.

Solution scanning as a key policy tool: identifying management interventions to help maintain and enhance regulating ecosystem services

The major task of policy makers and practitioners when confronted with a resource management problem is to decide on the potential solution(s) to adopt from a range of available options. However, this process is unlikely to be successful and cost effective without access to an independently verified and comprehensive available list of options. There is currently burgeoning interest in ecosystem services and quantitative assessments of their importance and value. Recognition of the value of ecosystem services to human well-being represents an increasingly important argument for protecting and restoring the natural environment, alongside the moral and ethical justifications for conservation. As well as understanding the benefits of ecosystem services, it is also important to synthesize the practical interventions that are capable of maintaining and/or enhancing these services. Apart from pest regulation, pollination, and global climate regulation, this type of exercise has attracted relatively little attention. Through a systematic consultation exercise, we identify a candidate list of 296 possible interventions across the main regulating services of air quality regulation, climate regulation, water flow regulation, erosion regulation, water purification and waste treatment, disease regulation, pest regulation, pollination and natural hazard regulation. The range of interventions differs greatly between habitats and services depending upon the ease of manipulation and the level of research intensity. Some interventions have the potential to deliver benefits across a range of regulating services, especially those that reduce soil loss and maintain forest cover. Synthesis and applications: Solution scanning is important for questioning existing knowledge and identifying the range of options available to researchers and practitioners, as well as serving as the necessary basis for assessing cost effectiveness and guiding implementation strategies. We recommend that it become a routine part of decision making in all environmental policy areas.

Is eradication of the pinewood nematode (Bursaphelenchus xylophilus) likely? An evaluation of current contingency plans.

The pinewood nematode (PWN) is one of the worst tree-killing exotic pests in East-Asian countries. The first European record of establishment in Portugal in 1999 triggered extensive surveys and contingency plans for eradication in European countries, including immediate removal of large areas of conifer host trees. Using Norway as an example, we applied a simulation model to evaluate the chance of successful eradication of a hypothetical introduction by the current contingency plan in a northern area where wilting symptoms are not expected to occur. Despite a highly variable spread of nematode infestations in space and time, the probability of successful eradication in 20 years was consistently low (mean 0.035, SE 0.02). The low success did not change significantly by varying the biological parameters in sensitivity analyses (SA), probably due to the late detection of infestations by the survey (mean 14.3 years). SA revealed a strong influence of management parameters. However, a high probability of eradication required unrealistic measures: achieving an eradication probability of 0.99 in 20 years required 10,000 survey samples per year and a host tree removal radius of 8,000 m around each detection point.

Climate drivers of bark beetle outbreak dynamics in Norway spruce forests

Bark beetles are among the most devastating biotic agents affecting forests globally and several species are expected to be favored by climate change. Given the potential interactions of insect outbreaks with other biotic and abiotic disturbances, and the potentially strong impact of changing disturbance regimes on forest resources, investigating climatic drivers of destructive bark beetle outbreaks is of paramount importance. We analyzed 17 time-series of the amount of wood damaged by Ips typographus, the most destructive pest of Norway spruce forests, collected across 8 European countries in the last three decades. We aimed to quantify the relative importance of key climate drivers in explaining timber loss dynamics, also testing for possible synergistic effects. Local outbreaks shared the same drivers, including increasing summer rainfall deficit and warm temperatures. Large availability of storm-felled trees in the previous year was also strongly related to an increase in timber loss, likely by providing an alternative source of breeding material. We did not find any positive synergy among outbreak drivers. On the contrary, the occurrence of large storms reduced the positive effect of warming temperatures and rainfall deficit. The large surplus of breeding material likely boosted I. typographus population size above the density threshold required to colonize and kill healthy trees irrespective of other climate triggers. Importantly, we found strong negative density dependence in I. typographus that may provide a mechanism for population decline after population eruptions. Generality in the effects of complex climatic events across different geographical areas suggests that the large-scale drivers can be used as early warning indicators of increasing local outbreak probability. Ecography (Less)

Reducing the risk of invasive forest pests and pathogens : Combining legislation, targeted management and public awareness

Intensifying global trade will result in increased numbers of plant pest and pathogen species inadvertently being transported along with cargo. This paper examines current mechanisms for prevention and management of potential introductions of forest insect pests and pathogens in the European Union (EU). Current European legislation has not been found sufficient in preventing invasion, establishment and spread of pest and pathogen species within the EU. Costs associated with future invasions are difficult to estimate but past invasions have led to negative economic impacts in the invaded country. The challenge is combining free trade and free movement of products (within the EU) with protection against invasive pests and pathogens. Public awareness may mobilise the public for prevention and detection of potential invasions and, simultaneously, increase support for eradication and control measures. We recommend focus on commodities in addition to pathways, an approach within the EU using a centralised response unit and, critically, to engage the general public in the battle against establishment and spread of these harmful pests and pathogens.

Spatio-temporal dynamics of an Ips acuminatus outbreak and implications for management

1 Understanding spatio‐temporal processes of bark beetle infestations is crucial for predicting beetle behaviour and aiding management decisions aiming to prevent or mitigate tree mortality. We recorded the spatial and temporal distribution of killed trees during the 5‐year period of an Ips acuminatus outbreak. 2 Killed trees were always grouped in well‐defined patches (infestation spots). In years of high population density, infestation spots were large and aggregated, whereas, in years of low density, infestation spots were small and weakly aggregated or randomly distributed within the study area. 3 Most trees were killed in the spring by beetles that had hibernated but, in some years, trees were also killed in the summer by new‐generation beetles originating from spring attacks. Spring‐killed trees always formed new infestation spots at new locations (i.e. spot proliferation). By contrast, summer‐killed trees always occurred at the edge of active spots established in the spring, thus resulting in spot growth. 4 With regard to management strategies, the results obtained in the present study suggest that areas located in close proximity to infestations of the previous year should be prioritized for risk assessment. Because large spots account for most of the observed tree mortality, the cut‐and‐remove method should be focused on these spots as soon as crown discoloration appears in the summer. If applied timely, this strategy will remove the new‐generation beetles originating from the spring attacks before they emerge and also reduce the risk of spot growth.

Methods to identify the prey of invertebrate predators in terrestrial field studies

Abstract Predation is an interaction during which an organism kills and feeds on another organism. Past and current interest in studying predation in terrestrial habitats has yielded a number of methods to assess invertebrate predation events in terrestrial ecosystems. We provide a decision tree to select appropriate methods for individual studies. For each method, we then present a short introduction, key examples for applications, advantages and disadvantages, and an outlook to future refinements. Video and, to a lesser extent, live observations are recommended in studies that address behavioral aspects of predator–prey interactions or focus on per capita predation rates. Cage studies are only appropriate for small predator species, but often suffer from a bias via cage effects. The use of prey baits or analyses of prey remains are cheaper than other methods and have the potential to provide per capita predation estimates. These advantages often come at the cost of low taxonomic specificity. Molecular methods provide reliable estimates at a fine level of taxonomic resolution and are free of observer bias for predator species of any size. However, the current PCR‐based methods lack the ability to estimate predation rates for individual predators and are more expensive than other methods. Molecular and stable isotope analyses are best suited to address systems that include a range of predator and prey species. Our review of methods strongly suggests that while in many cases individual methods are sufficient to study specific questions, combinations of methods hold a high potential to provide more holistic insights into predation events. This review presents an overview of methods to researchers that are new to the field or to particular aspects of predation ecology and provides recommendations toward the subset of suitable methods to identify the prey of invertebrate predators in terrestrial field research.

Estimating bee and wasp (Hymenoptera: Aculeata) diversity on clear-cuts in forest landscapes – an evaluation of sampling methods

To assess species diversity efficiently and adequately, it is important to understand how species diversity assessments are affected by sampling effort and methodology. We evaluated methods for sampling bees and wasps on clear‐cuts in managed boreal forest landscapes to assess the effects of trap type, sampling effort and time within season on observed species diversity. We found that pan traps and window traps captured similar numbers of species, whereas a much lower number was captured by trap‐nests. The efficiency of the trap types varied between species groups, with pollen‐collecting bees being most effectively sampled by pan traps and dead wood‐nesting bees and wasps by window traps. Species turnover over time was moderate, and consequently the sampling period could be reduced to 5–6 weeks in boreal forests and similar habitat types without a major decrease in the number of species collected. We recommend using window traps for bees and wasps in forest habitats. Combining trap types is recommended if the aim is to collect broad species assemblages, while single types are most useful for the efficient collection of specific species groups.