Masaki Ohno

Photochemical decomposition of perfluorooctanoic acid mediated by iron in strongly acidic conditions

The performance of a ferric ion mediated photochemical process for perfluorooctanoic acid (PFOA) decomposition in strongly acidic conditions of pH 2.0 was evaluated in comparison with those in weakly acidic conditions, pH 3.7 or pH 5.0, based on iron species composition and ferric ion regeneration. Complete decomposition of PFOA under UV irradiation was confirmed at pH 2.0, whereas perfluoroheptanoic acid (PFHpA) and other intermediates were accumulated in weakly acidic conditions. Iron states at each pH were evaluated using a chemical equilibrium model, Visual MINTEQ. The main iron species at pH 2.0 is Fe(3+) ion. Although Fe(3+) ion is consumed and is transformed to Fe(2+) ion by photochemical decomposition of PFOA and its intermediates, the produced Fe(2+) ion will change to Fe(3+) ion to restore chemical equilibrium. Continuous decomposition will occur at pH 2.0. However, half of the iron cannot be dissolved at pH 3.7. The main species of dissolved iron is Fe(OH)(2+). At pH 3.7 or higher pH, Fe(3+) ion will only be produced from the oxidation of Fe(2+) ion by hydroxyl radical produced by Fe(OH)(2+) under UV irradiation. These different mechanisms of Fe(3+) regeneration that prevail in strongly and weakly acidic conditions will engender different performances of the ferric ion.

Preparation and evaluation of magnetic carbonaceous materials for pesticide and metal removal

Magnetic carbonaceous materials were produced by carbonization of a cation exchange resin loaded with ferrous or ferric iron and activation using sieved oyster shell as the activation agent. The magnetic carbonaceous material with the maximum magnetic flux density on every axis (ESS-1) was obtained from the ferric-loaded resin by carbonization at 700°C, followed by activation with the oyster shell at 900°C, and magnetization. A separate step of carbonization and activation appears to cause more of a reduction reaction of Fe to form γ-Fe(2)O(3). The Fe compound in the magnetic carbonaceous material was identified from the XRD pattern as mainly γ-Fe(2)O(3). The magnetic flux density on every axis increased linearly as the amount of the oyster shell increased. Moreover, the adsorption ability of the products was evaluated for pesticides and metal ions. Both ESS-1 and a carbonaceous material obtained from the resin without ferric ion (RC) appear to have the highest adsorption ability for lead. Furthermore, the adsorption ability of ESS-1 might decrease by blockages of the pores with the loaded Fe compounds.

Isolation of Biofilm-Forming Bacteria from the Secondary Effluent of the Wastewater Treatment Plant and its Ability to Produce N-Acylhomoserine Lactone as Quorum Sensing Signal

Bacterial quorum sensing (QS) is one of the cell-to-cell communication systems. N-Acyl-homoserine lactones (AHLs) are the most common QS signals and responsible for biofilm formation in gram-negative bacteria. Inactivation of QS, also referred to as quorum quenching, has been regarded as a popular strategy to control membrane bioreactor (MBR) operations because biofouling in MBR wastewater treatment systems is often caused by biofilm formation. In the present study, 24 bacterial strains were isolated from the secondary effluent of a wastewater treatment plant and AHL productivity and biofilm formation were evaluated on 8 out of 24 isolates. The isolated 8 strains can produce AHLs that only possess a long (C8-C14) acyl side chain. The representative 3 strains were selected from these isolates based on the higher activity of biofilm formation. The AHL separation analysis with a thin layer chromatography clearly showed that N-octanoyl-L-homoserine lactone (C8-HSL) and N-hexanoyl-L-homoserine lactone (C6-HSL) existed in the secondary effluent sample, while no C6-HSL producing strain was isolated. C8-HSL was identified as the product of isolate No. 6. These results suggest that the secondary effluent probably contains various cell-to-cell signaling molecules derived not only from the inhabitants but also from the other microorganisms involved in the activated sludge for the biological pre-treatment. In this secondary effluent, AHL trapping techniques can be proposed as one of the acceptable strategies for the control of the QS systems because the remaining AHLs have relatively long acyl side chain and low concentrations.

Rapid novel test for the determination of biofouling potential on reverse osmosis membranes

A novel method was proposed to determine biofouling potential by direct analysis of a reverse osmosis (RO) membrane through fluorescence intensity analysis of biofilm formed on the membrane surface, thereby incorporating fouling tendencies of both feedwater and membrane. Evaluation of the biofouling potential on the RO membrane was done by accelerated biofilm formation through soaking of membranes in high biofouling potential waters obtained by adding microorganisms and glucose in test waters. The biofilm formed on the soaked membrane was quantified by fluorescence intensity microplate analysis. The soaking methods capability in detecting biofilm formation was confirmed when percentage coverage obtained through fluorescence microscopy and intensity values exhibited a linear correlation (R(2) = 0.96). Continuous cross-flow experiments confirmed the ability and reliability of the soaking method in giving biofouling potential on RO membranes when a good correlation (R(2) = 0.87) between intensity values of biofilms formed on the membrane during soaking and filtration conditions was obtained. Applicability of the test developed was shown when three commercially available polyamide (PA) RO membranes were assessed for biofouling potential. This new method can also be applied for the determination of biofouling potential in water with more than 3.6 mg L(-1) easily degradable organic carbon.

Distribution of metals in surface sediments from a small river flowing through urban and agricultural areas.

The characteristic distributions of 12 metals (Al, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, Sr, Cd and Pb) were investigated in surface sediments from a small river (Niitsu River) flowing through both urban and agricultural areas by comparison with those from the upper main stream (Nodai River). Among the investigated metals, the mean concentrations of Al, Cr, Fe, Zn, Cd and Pb in the Niitsu River were significantly higher than those in the Nodai River. The investigated sites can be characterized by the principal components 1–3.

Enhancement effects of cationic contaminants from bacteria on cake layer formation and biofouling on an RO membrane

The model cationic molecule prodigiosin interacted with a polyamide/polysulfone composite reverse osmosis (RO) membrane, resulting in a reduction of the membrane permeation rate. Prodigiosin is an antibacterial agent produced by Serratia marcescens that is frequently isolated from activated sludge of domestic or industrial wastewater. Such molecules respectively secreted or leaked from live or dead cells are thought to affect membrane biofouling. In this study, a cell suspension containing prodigiosin-producing S. marcescens AS-1 wild-type or the non-producing AS-1ΔspnI strain was fed to the thin RO membrane to determine the occlusion ratio on the membrane. Cationic prodigiosin enhanced membrane biofouling by clogging the pores and enhanced the accumulation of the cake layer. The effects remarkably recovered the occlusion ratio after removing the cake layer by feeding with water. After temporary pressure relief, the occlusion ratios for AS-1 and AS-1ΔspnI were recovered to stable levels from approximately 70 to 49% and 23%, respectively. Zetapotential analysis supported the neutralization effects leading to the accumulation of bacterial cells under applied high pressure for RO membrane permeation.