Massimiliano Galluzzi

The interaction between uPAR and vitronectin triggers ligand‐independent adhesion signalling by integrins

The urokinase‐type plasminogen activator receptor (uPAR) is a non‐integrin vitronectin (VN) cell adhesion receptor linked to the plasma membrane by a glycolipid anchor. Through structure–function analyses of uPAR, VN and integrins, we document that uPAR‐mediated cell adhesion to VN triggers a novel type of integrin signalling that is independent of integrin–matrix engagement. The signalling is fully active on VN mutants deficient in integrin binding site and is also efficiently transduced by integrins deficient in ligand binding. Although integrin ligation is dispensable, signalling is crucially dependent upon an active conformation of the integrin and its association with intracellular adaptors such as talin. This non‐canonical integrin signalling is not restricted to uPAR as it poses no structural constraints to the receptor mediating cell attachment. In contrast to canonical integrin signalling, where integrins form direct mechanical links between the ECM and the cytoskeleton, the molecular mechanism enabling the crosstalk between non‐integrin adhesion receptors and integrins is dependent upon membrane tension. This suggests that for this type of signalling, the membrane represents a critical component of the molecular clutch.

Standardized Nanomechanical Atomic Force Microscopy Procedure (SNAP) for Measuring Soft and Biological Samples

We present a procedure that allows a reliable determination of the elastic (Young’s) modulus of soft samples, including living cells, by atomic force microscopy (AFM). The standardized nanomechanical AFM procedure (SNAP) ensures the precise adjustment of the AFM optical lever system, a prerequisite for all kinds of force spectroscopy methods, to obtain reliable values independent of the instrument, laboratory and operator. Measurements of soft hydrogel samples with a well-defined elastic modulus using different AFMs revealed that the uncertainties in the determination of the deflection sensitivity and subsequently cantilever’s spring constant were the main sources of error. SNAP eliminates those errors by calculating the correct deflection sensitivity based on spring constants determined with a vibrometer. The procedure was validated within a large network of European laboratories by measuring the elastic properties of gels and living cells, showing that its application reduces the variability in elastic moduli of hydrogels down to 1%, and increased the consistency of living cells elasticity measurements by a factor of two. The high reproducibility of elasticity measurements provided by SNAP could improve significantly the applicability of cell mechanics as a quantitative marker to discriminate between cell types and conditions.

Interaction of Imidazolium-Based Room-Temperature Ionic Liquids with DOPC Phospholipid Monolayers: Electrochemical Study

To test the biocompatible character of room-temperature ionic liquids (ILs), the interaction of various ILs with biological membrane (biomembrane) models was studied in this work. Dioleoyl phosphatidylcholine (DOPC) adsorbed on a mercury (Hg) electrode forms an impermeable defect-free monolayer which is a well established biomembrane model, prone to be studied by electrochemical techniques. We have monitored the modifications of the Hg supported monolayer caused by ILs using rapid cyclic voltammetry (RCV), alternating current voltammetry (ACV), and electrochemical impedance spectroscopy (EIS). A series of imidazolium-based ILs were investigated whose interaction highlighted the role of anion and lateral side chain of cation during the interaction with DOPC monolayers. It was shown that the hydrophobic and lipophilic character of the IL cations is a primary factor responsible for this interaction. Hg-supported monolayers provide an accurate analysis of the behavior of ILs at the interface of a biomembrane leading to a comprehensive understanding of the interaction mechanisms involved. At the same time, these experiments show that the Hg-phospholipid model is an effective toxicity sensing technique as shown by the correlation between literature in vivo toxicity data and the data from this study.

Direct characterization of fluid lipid assemblies on mercury in electric fields.

Phospholipid monolayers on mercury (Hg) surfaces have received substantial and extensive scientific interest not only because of their use as a biomembrane model but also for their application as a successful toxicity-sensing element. The monolayers show characteristic and very reproducible phase transitions manifest as consecutive voltammetric peaks in response to applied transverse electric fields. Unfortunately, apart from the results of simulation studies, there is a lack of data on the lipid phase structures to help interpret these voltammetric peaks. In this paper we report on the direct measurement of the structural changes underlying the phase transitions of phospholipid layers of dioleoyl phosphatidylcholine (DOPC) at electrified Hg surfaces using atomic force microscopy force-distance techniques. These direct measurements enable a description of the following structural changes in fluid lipid assemblies on a liquid electrode within an increasing transverse electric field. At about -1.0 V (vs Ag/AgCl) a field-facilitated ingress of ions and water into the monolayer results in a phase transition to a structured 2D emulsion. This is followed by a further phase transition at more negative potentials involving the readsorption of bilayer patches. At stronger values of field the bilayer patches form semivesicles, which subsequently collapse to form a monolayer of uncertain composition at very negative potentials. The observation that a monolayer on Hg converts to a bilayer by increasing the applied potential has allowed techniques to be developed for preparing and characterizing a near-continuous DOPC bilayer on Hg in an applied potential window within -1.0 and -1.4 V (vs Ag/AgCl).

Large, Linear, and Tunable Positive Magnetoresistance of Mechanically Stable Graphene Foam–Toward High-Performance Magnetic Field Sensors

Here, we present the first observation of magneto-transport properties of graphene foam (GF) composed of a few layers in a wide temperature range of 2-300 K. Large room-temperature linear positive magnetoresistance (PMR ≈ 171% at B ≈ 9 T) has been detected. The largest PMR (∼213%) has been achieved at 2 K under a magnetic field of 9 T, which can be tuned by the addition of poly(methyl methacrylate) to the porous structure of the foam. This remarkable magnetoresistance may be the result of quadratic magnetoresistance. The excellent magneto-transport properties of GF open a way toward three-dimensional graphene-based magnetoelectronic devices.

Lamellipodial tension, not integrin/ligand binding, is the crucial factor to realise integrin activation and cell migration.

The molecular clutch (MC) model proposes that actomyosin-driven force transmission permits integrin-dependent cell migration. To investigate the MC, we introduced diverse talin (TLN) and integrin variants into Flp-In™ T-Rex™ HEK293 cells stably expressing uPAR. Vitronectin variants served as substrate providing uPAR-mediated cell adhesion and optionally integrin binding. This particular system allowed us to selectively analyse key MC proteins and interactions, effectively from the extracellular matrix substrate to intracellular f-actin, and to therewith study mechanobiological aspects of MC engagement also uncoupled from integrin/ligand binding. With this experimental approach, we found that for the initial PIP2-dependent membrane/TLN/f-actin linkage and persistent lamellipodia formation the C-terminal TLN actin binding site (ABS) is dispensable. The establishment of an adequate MC-mediated lamellipodial tension instead depends predominantly on the coupling of this C-terminal TLN ABS to the actomyosin-driven retrograde actin flow force. This lamellipodial tension is crucial for full integrin activation eventually determining integrin-dependent cell migration. In the integrin/ligand-independent condition the frictional membrane resistance participates to these processes. Integrin/ligand binding can also contribute but is not necessarily required.

Reduced graphene oxide composites with water soluble copolymers having tailored lower critical solution temperatures and unique tube-like structure

Nanohybrids of graphene with water soluble polymer were synthesized using ‘grafting from’ method. GO, prepared by modified Hummers’ method, was first reacted with sodium azide. Alkyne-terminated RAFT-CTA was synthesized by reaction of propargyl alcohol and S-1-dodecyl-S’-(α,α‘-dimethyl-α”-acetic acid) trithiocarbonate. RAFT-CTA was grafted onto the GO sheets by facile click-reaction and subsequently, N-isopropylacrylamide (NIPAM) and N-ethyleacrylamide (NEAM) were polymerized on graphene sheets via RAFT polymerization method. The respective copolymers with different ratios were also prepared. The nanohybrids were characterized by FTIR, XRD, TGA, Raman, SEM, and AFM. Both SEM and AFM clearly showed rod-like structures for rGO-PNEAM. XRD showed a small peak at 2θ = 19.21°, corresponding to d-spacing ≈ 4.6 Å. In addition, the nanohybrids showed a very broad temperature range for the LCST in water between ca. 30 and 70 °C.

Atomic force microscopy methodology and AFMech Suite software for nanomechanics on heterogeneous soft materials

Atomic force microscopy has proven to be a valuable technique to characterize the mechanical and morphological properties of heterogeneous soft materials such as biological specimens in liquid environment. Here we propose a 3-step method in order to investigate biological specimens where heterogeneity hinder a quantitative characterization: (1) precise AFM calibration, (2) nano-indentation in force volume mode, (3) array of finite element simulations built from AFM indentation events. We combine simulations to determine internal geometries, multi-layer material properties, and interfacial friction. In order to easily perform this analysis from raw AFM data to simulation comparison, we propose a standalone software, AFMech Suite comprising five interacting interfaces for simultaneous calibration, morphology, adhesion, mechanical, and simulation analysis. We test the methodology on soft hydrogels with hard spherical inclusions, as a soft-matter model system. Finally, we apply the method on E. coli bacteria supported on soft/hard hydrogels to prove usefulness in biological field.Atomic force microscopy is an indispensable method in characterizing soft materials but the complexity of biological samples makes reproducible measurements difficult. Here the authors use a 3-step method to investigate biological specimens in which vertical and lateral heterogeneity hinders a precise quantitative characterization.

Imidazolium-Based Ionic Liquids Affect Morphology and Rigidity of Living Cells: an Atomic Force Microscopy Study

The study of the toxicity, biocompatibility, and environmental sustainability of room-temperature ionic liquids (ILs) is still in its infancy. Understanding the impact of ILs on living organisms, especially from the aquatic ecosystem, is urgent, since large amounts of these substances are starting to be employed as solvents in industrial chemical processes, and on the other side, evidence of toxic effects of ILs on microorganisms and single cells have been observed. To date, the toxicity of ILs has been investigated by means of macroscopic assays aimed at characterizing the effective concentrations (like the EC50) that cause the death of a significant fraction of the population of microorganisms and cells. These studies allow us to identify the cell membrane as the first target of the IL interaction, whose effectiveness was correlated to the lipophilicity of the cation, i.e., to the length of the lateral alkyl chain. Our study aimed at investigating the molecular mechanisms underpinning the interaction of ILs with living cells. To this purpose, we carried out a combined topographic and mechanical analysis by atomic force microscopy of living breast metastatic cancer cells (MDA-MB-231) upon interaction with imidazolium-based ILs. We showed that ILs are able to induce modifications of the overall rigidity (effective Youngs modulus) and morphology of the cells. Our results demonstrate that ILs act on the physical properties of the outer cell layer (the membrane linked to the actin cytoskeleton), already at concentrations below the EC50. These potentially toxic effects are stronger at higher IL concentrations, as well as with longer lateral chains in the cation.

Biomechanical Heterogeneity of Living Cells: Comparison between Atomic Force Microscopy and Finite Element Simulation

Atomic force microscopy (AFM) indentation is a popular method for characterizing the micromechanical properties of soft materials such as living cells. However, the mechanical data obtained from deep indentation measurements can be difficult and problematic to interpret as a result of the complex geometry of a cell, the nonlinearity of indentation contact, and constitutive relations of heterogeneous hyperelastic soft components. Living MDA-MB-231 cells were indented by spherical probes to obtain morphological and mechanical data that were adopted to build an accurate finite element model (FEM) for a parametric study. Initially, a 2D-axisymmetric numerical model was constructed with the main purpose of understanding the effect of geometrical and mechanical properties of constitutive parts such as the cell body, nucleus, and lamellipodium. A series of FEM deformation fields were directly compared with atomic force spectroscopy in order to resolve the mechanical convolution of heterogeneous parts and quantify Youngs modulus and the geometry of nuclei. Furthermore, a 3D finite element model was constructed to investigate indentation events located far from the axisymmetric geometry. In this framework, the joint FEM/AFM approach has provided a useful methodology and a comprehensive characterization of the heterogeneous structure of living cells, emphasizing the deconvolution of geometrical structure and the true elastic modulus of the cell nucleus.