Mathias Kolle

Mimicking the colourful wing scale structure of the Papilio blumei butterfly.

The brightest and most vivid colours in nature arise from the interaction of light with surfaces that exhibit periodic structure on the micro- and nanoscale. In the wings of butterflies, for example, a combination of multilayer interference, optical gratings, photonic crystals and other optical structures gives rise to complex colour mixing. Although the physics of structural colours is well understood, it remains a challenge to create artificial replicas of natural photonic structures. Here we use a combination of layer deposition techniques, including colloidal self-assembly, sputtering and atomic layer deposition, to fabricate photonic structures that mimic the colour mixing effect found on the wings of the Indonesian butterfly Papilio blumei. We also show that a conceptual variation to the natural structure leads to enhanced optical properties. Our approach offers improved efficiency, versatility and scalability compared with previous approaches.

Floral Iridescence, Produced by Diffractive Optics, Acts As a Cue for Animal Pollinators

Iridescence, the change in hue of a surface with varying observation angles, is used by insects, birds, fish, and reptiles for species recognition and mate selection. We identified iridescence in flowers of Hibiscus trionum and Tulipa species and demonstrated that iridescence is generated through diffraction gratings that might be widespread among flowering plants. Although iridescence might be expected to increase attractiveness, it might also compromise target identification because the objects appearance will vary depending on the viewers perspective. We found that bumblebees (Bombus terrestris) learn to disentangle flower iridescence from color and correctly identify iridescent flowers despite their continuously changing appearance. This ability is retained in the absence of cues from polarized light or ultraviolet reflectance associated with diffraction gratings.

Bio‐Inspired Band‐Gap Tunable Elastic Optical Multilayer Fibers

The concentrically-layered photonic structure found in the tropical fruit Margaritaria nobilis serves as inspiration for photonic fibers with mechanically tunable band-gap. The fibers show the spectral filtering capabilities of a planar Bragg stack while the microscopic curvature decreases the strong directional chromaticity associated with flat multilayers. Elongation of the elastic fibers results in a shift of the reflection of over 200 nm.

Tunable Mesoporous Bragg Reflectors Based on Block-Copolymer Self-Assembly

Mesoporous distributed Bragg reflectors (MDBRs) exhibit porosity on the sub-wavelength scale. They are promising device components for biological and chemisal sensing as well as for light management in optoelectronic devices. In this chapter a new route for the fabrication of MDBRs is presented which relies on the structure directing properties of the block copolymer poly(isoprene-block-ethylene oxide) in combination with sol-gel chemistry. The interplay between structure directing organic host and coassembled inorganic guest allows the fine tuning of refractive index in the outcome material. Stacking high and low refractive index films in sequential order enables the fast and reliable construction of MDBRs which exhibit a continuous TiO2 network with large accessible pores and high optical quality.

Bright-White Beetle Scales Optimise Multiple Scattering of Light

Whiteness arises from diffuse and broadband reflection of light typically achieved through optical scattering in randomly structured media. In contrast to structural colour due to coherent scattering, white appearance generally requires a relatively thick system comprising randomly positioned high refractive-index scattering centres. Here, we show that the exceptionally bright white appearance of Cyphochilus and Lepidiota stigma beetles arises from a remarkably optimised anisotropy of intra-scale chitin networks, which act as a dense scattering media. Using time-resolved measurements, we show that light propagating in the scales of the beetles undergoes pronounced multiple scattering that is associated with the lowest transport mean free path reported to date for low-refractive-index systems. Our light transport investigation unveil high level of optimisation that achieves high-brightness white in a thin low-mass-per-unit-area anisotropic disordered nanostructure.

Bioinspired micrograting arrays mimicking the reverse color diffraction elements evolved by the butterfly Pierella luna

Significance In the course of evolution, many organisms have developed unique light manipulation strategies that rely on intriguing combinations of a broad range of optical effects generated by materials with sophisticated multiscale hierarchical structural arrangements. By exploiting the optical principles underlying natural structural color, we can generate new photonic materials. Researchers have only just begun to match nature’s morphological and compositional complexity in man-made materials using nanofabrication. We present a bioinspired photonic material that mimics the reverse color-order diffraction found in the butterfly Pierella luna. Exploiting and improving the butterfly’s strategy, we create photonic materials that increase our basic understanding of the optical interplay of hierarchical structures and provide a platform for the development of novel photonic devices. Recently, diffraction elements that reverse the color sequence normally observed in planar diffraction gratings have been found in the wing scales of the butterfly Pierella luna. Here, we describe the creation of an artificial photonic material mimicking this reverse color-order diffraction effect. The bioinspired system consists of ordered arrays of vertically oriented microdiffraction gratings. We present a detailed analysis and modeling of the coupling of diffraction resulting from individual structural components and demonstrate its strong dependence on the orientation of the individual miniature gratings. This photonic material could provide a basis for novel developments in biosensing, anticounterfeiting, and efficient light management in photovoltaic systems and light-emitting diodes.

Stretch-tuneable dielectric mirrors and optical microcavities

We demonstrate how tuneable Distributed Bragg Reflectors (DBRs) and resonant micro-cavities can be built by a scalable layer assembly of the transparent utility rubbers polydimethylsiloxane and polystyrene-polyisoprene. Stretching the devices by more than 60% leads to an affine contraction of the layer thicknesses thereby tuning both DBR and cavity modes across the entire visible spectrum. Such rapidly- and reversibly- stretch-tuneable cavities can be used in tuneable micro-lasers and for quantitative optical strain sensing applications.

Enhancement of absorption and color contrast in ultra-thin highly absorbing optical coatings

Recently a new class of optical interference coatings was introduced which comprises ultra-thin, highly absorbing dielectric layers on metal substrates. We show that these lossy coatings can be augmented by an additional transparent subwavelength layer. We fabricated a sample comprising a gold substrate, an ultra-thin film of germanium with a thickness gradient, and several alumina films. The experimental reflectivity spectra showed that the additional alumina layer increases the color range that can be obtained, in agreement with calculations. More generally, this transparent layer can be used to enhance optical absorption, protect against erosion, or as a transparent electrode for optoelectronic devices.

Color from hierarchy: Diverse optical properties of micron-sized spherical colloidal assemblies

Significance Controlling the internal structure over multiple length scales can produce materials with superior properties. This hierarchical design is ubiquitous in nature where materials have evolved to show maximum functionality from a limited choice of available building blocks. Mimicking the emergence of functionality from simple building blocks is a key challenge for man-made materials. Here, we show how a simple confined self-assembly of colloidal particles leads to a complex geometry that displays a surprising variety of optical effects. These effects are a result of the intricate interaction of light with the structural features at different length scales, and the geometry of the self-assembled structure. The results underline the importance of controlling assembly processes over multiple length scales to tailor properties and maximize performance. Materials in nature are characterized by structural order over multiple length scales have evolved for maximum performance and multifunctionality, and are often produced by self-assembly processes. A striking example of this design principle is structural coloration, where interference, diffraction, and absorption effects result in vivid colors. Mimicking this emergence of complex effects from simple building blocks is a key challenge for man-made materials. Here, we show that a simple confined self-assembly process leads to a complex hierarchical geometry that displays a variety of optical effects. Colloidal crystallization in an emulsion droplet creates micron-sized superstructures, termed photonic balls. The curvature imposed by the emulsion droplet leads to frustrated crystallization. We observe spherical colloidal crystals with ordered, crystalline layers and a disordered core. This geometry produces multiple optical effects. The ordered layers give rise to structural color from Bragg diffraction with limited angular dependence and unusual transmission due to the curved nature of the individual crystals. The disordered core contributes nonresonant scattering that induces a macroscopically whitish appearance, which we mitigate by incorporating absorbing gold nanoparticles that suppress scattering and macroscopically purify the color. With increasing size of the constituent colloidal particles, grating diffraction effects dominate, which result from order along the crystal’s curved surface and induce a vivid polychromatic appearance. The control of multiple optical effects induced by the hierarchical morphology in photonic balls paves the way to use them as building blocks for complex optical assemblies—potentially as more efficient mimics of structural color as it occurs in nature.

A highly conspicuous mineralized composite photonic architecture in the translucent shell of the blue-rayed limpet

Many species rely on diverse selections of entirely organic photonic structures for the manipulation of light and the display of striking colours. Here we report the discovery of a mineralized hierarchical photonic architecture embedded within the translucent shell of the blue-rayed limpet Patella pellucida. The bright colour of the limpet’s stripes originates from light interference in a periodically layered zig-zag architecture of crystallographically co-oriented calcite lamellae. Beneath the photonic multilayer, a disordered array of light-absorbing particles provides contrast for the blue colour. This unique mineralized manifestation of a synergy of two distinct optical elements at specific locations within the continuum of the limpet’s translucent protective shell ensures the vivid shine of the blue stripes, which can be perceived under water from a wide range of viewing angles. The stripes’ reflection band coincides with the spectral range of minimal light absorption in sea water, raising intriguing questions regarding their functional significance.