Matthew Chin

Integrated Circuits Based on Bilayer MoS2 Transistors

Two-dimensional (2D) materials, such as molybdenum disulfide (MoS(2)), have been shown to exhibit excellent electrical and optical properties. The semiconducting nature of MoS(2) allows it to overcome the shortcomings of zero-bandgap graphene, while still sharing many of graphenes advantages for electronic and optoelectronic applications. Discrete electronic and optoelectronic components, such as field-effect transistors, sensors, and photodetectors made from few-layer MoS(2) show promising performance as potential substitute of Si in conventional electronics and of organic and amorphous Si semiconductors in ubiquitous systems and display applications. An important next step is the fabrication of fully integrated multistage circuits and logic building blocks on MoS(2) to demonstrate its capability for complex digital logic and high-frequency ac applications. This paper demonstrates an inverter, a NAND gate, a static random access memory, and a five-stage ring oscillator based on a direct-coupled transistor logic technology. The circuits comprise between 2 to 12 transistors seamlessly integrated side-by-side on a single sheet of bilayer MoS(2). Both enhancement-mode and depletion-mode transistors were fabricated thanks to the use of gate metals with different work functions.

Black Phosphorus Radio-Frequency Transistors

Few-layer and thin film forms of layered black phosphorus (BP) have recently emerged as a promising material for applications in high performance nanoelectronics and infrared optoelectronics. Layered BP thin films offer a moderate bandgap of around 0.3 eV and high carrier mobility, which lead to transistors with decent on-off ratios and high on-state current densities. Here, we demonstrate the gigahertz frequency operation of BP field-effect transistors for the first time. The BP transistors demonstrated here show respectable current saturation with an on-off ratio that exceeds 2 × 10(3). We achieved a current density in excess of 270 mA/mm and DC transconductance above 180 mS/mm for hole conduction. Using standard high frequency characterization techniques, we measured a short-circuit current-gain cutoff frequency fT of 12 GHz and a maximum oscillation frequency fmax of 20 GHz in 300 nm channel length devices. BP devices may offer advantages over graphene transistors for high frequency electronics in terms of voltage and power gain due to the good current saturation properties arising from their finite bandgap, thus can be considered as a promising candidate for the future high performance thin film electronics technology for operation in the multi-GHz frequency range and beyond.

Electrical performance of monolayer MoS2 field-effect transistors prepared by chemical vapor deposition

Molybdenum disulfide (MoS2) field effect transistors (FET) were fabricated on atomically smooth large-area single layers grown by chemical vapor deposition. The layer qualities and physical properties were characterized using high-resolution Raman and photoluminescence spectroscopy, scanning electron microscopy, and atomic force microscopy. Electronic performance of the FET devices was measured using field effect mobility measurements as a function of temperature. The back-gated devices had mobilities of 6.0 cm2/V s at 300 K without a high-κ dielectric overcoat and increased to 16.1 cm2/V s with a high-κ dielectric overcoat. In addition the devices show on/off ratios ranging from 105 to 109.

Electrical Transport Properties of Polycrystalline Monolayer Molybdenum Disulfide

Semiconducting MoS2 monolayers have shown many promising electrical properties, and the inevitable polycrystallinity in synthetic, large-area films renders understanding the effect of structural defects, such as grain boundaries (GBs, or line-defects in two-dimensional materials), essential. In this work, we first examine the role of GBs in the electrical-transport properties of MoS2 monolayers with varying line-defect densities. We reveal a systematic degradation of electrical characteristics as the line-defect density increases. The two common MoS2 GB types and their specific roles are further examined, and we find that only tilt GBs have a considerable effect on the MoS2 electrical properties. By examining the electronic states and sources of disorder using temperature-dependent transport studies, we adopt the Anderson model for disordered systems to explain the observed transport behaviors in different temperature regimes. Our results elucidate the roles played by GBs in different scenarios and give insights into their underlying scattering mechanisms.

Optoelectronic devices based on two-dimensional transition metal dichalcogenides

In the past few years, two-dimensional (2D) transition metal dichalcogenide (TMDC) materials have attracted increasing attention of the research community, owing to their unique electronic and optical properties, ranging from the valley–spin coupling to the indirect-to-direct bandgap transition when scaling the materials from multi-layer to monolayer. These properties are appealing for the development of novel electronic and optoelectronic devices with important applications in the broad fields of communication, computation, and healthcare. One of the key features of the TMDC family is the indirect-to-direct bandgap transition that occurs when the material thickness decreases from multilayer to monolayer, which is favorable for many photonic applications. TMDCs have also demonstrated unprecedented flexibility and versatility for constructing a wide range of heterostructures with atomic-level control over their layer thickness that is also free of lattice mismatch issues. As a result, layered TMDCs in combination with other 2D materials have the potential for realizing novel high-performance optoelectronic devices over a broad operating spectral range. In this article, we review the recent progress in the synthesis of 2D TMDCs and optoelectronic devices research. We also discuss the challenges facing the scalable applications of the family of 2D materials and provide our perspective on the opportunities offered by these materials for future generations of nanophotonics technology.

Impact of electrode roughness on metal-insulator-metal tunnel diodes with atomic layer deposited Al2O3 tunnel barriers

Metal-insulator-metal (MIM) tunnel diodes on a variety of high and low work function metals with various levels of root-mean-square roughness are fabricated using high quality atomic layer deposited Al2O3 as the insulating tunnel barrier. It is found that electrode surface roughness can dominate the current versus voltage characteristics of MIM diodes, even overwhelming the impact of metal work function. Devices with smoother bottom electrodes are found to produce current versus voltage behavior with higher asymmetry and better agreement with Fowler-Nordheim tunneling theory, as well as a greater percentage of functioning devices.

Growth-substrate induced performance degradation in chemically synthesized monolayer MoS2 field effect transistors

We report on the electronic transport properties of single-layer thick chemical vapor deposition (CVD) grown molybdenum disulfide (MoS2) field-effect transistors (FETs) on Si/SiO2 substrates. MoS2 has been extensively investigated for the past two years as a potential semiconductor analogue to graphene. To date, MoS2 samples prepared via mechanical exfoliation have demonstrated field-effect mobility values which are significantly higher than that of CVD-grown MoS2. In this study, we will show that the intrinsic electronic performance of CVD-grown MoS2 is equal or superior to that of exfoliated material and has been possibly masked by a combination of interfacial contamination on the growth substrate and residual tensile strain resulting from the high-temperature growth process. We are able to quantify this strain in the as-grown material using pre- and post-transfer metrology and microscopy of the same crystals. Moreover, temperature-dependent electrical measurements made on as-grown and transferred MoS2 ...

Large-scale 2D electronics based on single-layer MoS 2 grown by chemical vapor deposition

2D nanoelectronics based on single-layer MoS2 offers great advantages for both conventional and ubiquitous applications. This paper discusses the large-scale CVD growth of single-layer MoS2 and fabrication of integrated devices and circuits for the first time. Fundamental building blocks of digital electronics, such as inverters and NAND gates, are fabricated to demonstrate its capability for logic applications.

Graphene-Based Thermopile for Thermal Imaging Applications

In this work, we leverage graphenes unique tunable Seebeck coefficient for the demonstration of a graphene-based thermal imaging system. By integrating graphene based photothermo-electric detectors with micromachined silicon nitride membranes, we are able to achieve room temperature responsivities on the order of ~7-9 V/W (at λ = 10.6 μm), with a time constant of ~23 ms. The large responsivities, due to the combination of thermal isolation and broadband infrared absorption from the underlying SiN membrane, have enabled detection as well as stand-off imaging of an incoherent blackbody target (300-500 K). By comparing the fundamental achievable performance of these graphene-based thermopiles with standard thermocouple materials, we extrapolate that graphenes high carrier mobility can enable improved performances with respect to two main figures of merit for infrared detectors: detectivity (>8 × 10(8) cm Hz(1/2) W(-1)) and noise equivalent temperature difference (<100 mK). Furthermore, even average graphene carrier mobility (<1000 cm(2) V(-1) s(-1)) is still sufficient to detect the emitted thermal radiation from a human target.

Blueshift of the A-exciton peak in folded monolayer 1H-MoS2

The large family of layered transition-metal dichalcogenides is widely believed to constitute a second family of two-dimensional (2D) semiconducting materials that can be used to create novel devices that complement those based on graphene. In many cases these materials have shown a transition from an indirect bandgap in the bulk to a direct bandgap in monolayer systems. In this work we experimentally show that folding a 1H molybdenum disulphide (MoS2) layer results in a turbostratic stack with enhanced photoluminescence quantum yield and a significant shift to the blue by 90 meV. This is in contrast to the expected 2H-MoS2 band structure characteristics, which include an indirect gap and quenched photoluminescence. We present a theoretical explanation to the origin of this behavior in terms of exciton screening.